双掺(Tm3+,Tb3+)LiYF4激光器1.5 μm波长激光阈值分析

由速率方程推出了双掺（Tm^3 ,Tb^3 ）离子准四能级系统的激光阈值解析式，讨论了Tm^3 和Tb^3 离子之间的相互作用。分析了1.5μm波长附近的激光阈值和Tm^3 、Tb^3 离子的掺杂原子数分数及晶体长度的关系。结果表明，对于对应Tm^3 离子^3H4→^3F4跃迁的约1.5μm波长的激光，激活离子Tm^3 的掺杂原子数分数过大时，交叉弛豫作用将使系统阈值迅速增加。Tb^3 离子的加入，一方面能抽空激光下能级，起到降低阈值的作用；另一方面亦减少了激光上能级的寿命，使阈值升高。故Tb^3 离子有最佳掺杂原子数分数。对于Tm原子数分数为y=0.01的Tm:LiYF4晶体，Tb^3 离子的最佳掺杂原子数分数为0.002左右，同时表明，激光阈值与晶体长度有关。最佳晶体长度与Tm^3 、Tb^3 离子的掺杂原子数分数以及晶体的衍射损耗和吸收损耗有关。     

Synthesis of heterocyclic systems with a carbohydrate fragment

Levoglucosenone reacts with α-aminoazoles to yield azolo[1,5-a]pyrimidine systems fused with a carbohydrate fragment. The reaction oocurs much more smoothly than in the case of other α,β-unsaturated ketones. The reactions of levoglucosenone with β-dicarbonyl compounds (dimedone, barbituric acid) in the presence of a base results in the pyran ring closure, which has never been observed earlier in reactions of β-dicarbonyl compounds with α,β-unsaturated ketones under the conditions of basic catalysis. The structures of products were established by IR and NMR spectroscopy. For Part 3, see Ref. 1. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 553–558, March, 1997.     

Diastereoselective Alkylation of (Diene-Aldehyde)Fe(CO)3 Complexes with Functionalized Zinc-Copper Reagents NuCu(CN)Znl

Addition of functionalized zinc-copper reagents to the title complexes proceeds in a highly diastereoselective fashion to afford dienol complexes. The relative configurations of adducts 3d were determined by single X-ray diffraction analysis.     

Double Michael Additions of Lithium Enolate of 1,4-Dioxaspiro[4.5]dec-6-en-8-One to Acrylates

Double Michael additions of lithium enolaie of 1,4-dioxaspiro[4.5]dec-6-en-8-one to four acrylates afforded bicyclo[2.2.2]octan-2-ones with high regio- and stereoselectivities in moderate yields.     

Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

C72,La2@C72几何结构和电子性质的计算研究

采用密度泛涵理论(density functional theory,DFT)中的广义梯度近似(generally gradient approximation,GGA)对富勒烯C72和内掺金属La富勒烯La2@C72三种同分异构体的几何结构和电子结构进行研究.发现在C72的三种同分异构体中,满足独立五边形规则(isolated-pentagon-rule,IPR)的C72(D6d)结构最为稳定;在La2@C72三种同分异构体中,有着两对两两相邻五元环(twofused-pentagon)的La2@C72(#10611)结构最为稳定,而满足IPR的La2@C72(D6d)的结构变成了最不稳定结构.从能级图和态密度图分析得知,笼子稳定性的变化与La原子的原子轨道与C72原子轨道之间的杂化有关.Mulliken电荷分析得知,La2@C72(#10611)的两个La原子共转移了约3个电子给C72,并且,它们几乎分布在整个C笼上,形成的电子结构为La23+@C3-72.净自旋分析得知,La2@C72(#10611)中La原子磁性完全淬灭.     

用短谐振腔结构优化THz电磁波参量振荡器的输出特性

以MgO：LiNbO₃为非线性光学介质，通过采用一种高性能腔反射镜实现了一种85mm短腔长的法布里-珀罗式的光学参量振荡器，产生THz电磁波的实验结果.这种短腔长THz参量振荡器比传统的160mm腔长的振荡阈值降低了22.3％；峰值能量提高了170％；频率调谐范围从0.5—2.4THz提高到0.8—3.1THz.还报道了一种基于平面金属丝网的法布里-珀罗干涉仪测量THz波线宽的实验结果. 关键词： THz电磁波 OPO 非线性光学 3')" href="#">LiNbO₃     

四角晶相HfO2(001)表面原子和电子结构研究

采用基于第一性原理的密度泛函理论研究了四角晶相二氧化铪(t-HfO₂)体相及 其(001)表面的原子几何与电子结构.理论计算结果表明，t-HfO₂(001)表面不会 产生重构现象.与体相电子结构相比, t-HfO₂(001)表面态密度明显高于体相态 密度.其次，表面原子的态密度更靠近费米能级(E_F)，价带往低能量处移动，并 有表面态产生.计算结果表明了t-HfO₂表面禁带宽度明显低于体相的禁带宽度. t-HfO₂(001)的表面态产生以及表面禁带宽度减小是由于Hf原子与O原子的配位 数减少，表面原子周围的环境发生变化而引起的. 关键词： 密度泛函理论 2(001)')" href="#">t-HfO₂(001) 表面电子结构     

Ag+掺杂的立方相Y2O3:Eu纳米晶体粉末发光强度研究

采用化学自燃烧法制备了不同Ag⁺掺杂浓度的Y₂O₃:Eu纳米晶体粉末样品(［Y³⁺］∶［Eu³⁺］∶［Ag⁺］=99∶1∶X，X=0—3.5×10^-2)，以及通过退火处理得到了相应的体材料.根据X射线衍射谱确定所得纳米和体材料样品均为纯立方相.实验表明在纳米尺寸样品中随着Ag离子浓度的增加，荧光发射强度随之增加，当X=2×10^-2时达到最大值，其发光强度比X=0时提高了近50%.当Ag离子浓度继续增加，样品发光强度保持不变.在相应的体材料样品中则没有观察到此现象.通过对各样品的发射光谱，激发光谱，X射线衍射图谱，透射电镜(TEM)照片和荧光衰减曲线的研究，分析了引起纳米样品荧光强度变化的原因是由于Ag离子与表面悬键氧结合，从而使这一无辐射通道阻断，使发光中心Eu³⁺的量子效率提高；Ag⁺的引入所带来的另一个效应是使激发更为有效.这两方面原因使发光效率得到了提高.