PHOTOELECTRON SPECTROSCOPY STUDY OF AMMONIA-INDUCED CHANGES IN ELECTROSTATICALLY-ASSEMBLED CONJUGATED POLYMER FILMS

ABSTRACT

Exposure of electrostatically assembled polyelectrolyte films comprised of the anionic carboxylic conjugated polymer poly[2-(3-thienyl)-ethanolhydroxycarbonylmethyl-urethane], hereafter referred to as H-PURET, and polycations such as poly(diallyldimethylammonium) chloride, here after referred to as PDADMAC, to aqueous ammonia vapor leads to dra matic changes in the ultraviolet-visible absorption spectrum. In the case of H-PURET/PDADMAC, a shift from 442 to 494 nm is observed upon overnight ammonia exposure. X-ray photoelectron spectroscopy has been used to investigate the mechanism of the changes in optical properties. The C1s, O1s and S2p core levels exhibit negligible ammonia-induced changes. Two N1s peaks are observed in virgin H-PURET/PDADMAC assemblies, and ammonia exposure causes the nitrogen peak corresponding to the H-PURET side chain to become more intense relative to that of the PDADMAC layer. This selective change in the N1s feature suggests that ammonia interacts with the polythiophene side-chain, presumably by deprotonating the fraction of carboxylic acid groups that remain in the H-PURET layer. This deprotonation apparently leads to structural or single chain conformational changes in the conjugated polymer layers that alter the electronic absorption spectrum.     

Molecular Assembly by Sequential Ionic Adsorption of Nanocrystalline TiO2 and a Conjugated Polymer

Abstract

Cationic nanocrystalline TiO₂ particles have been synthesized for which the size and composition of the nanoparticles were analyzed by a transmission emission microscopy and energy dispersive x‐ray spectrometer (EDXS). Multilayered films have been fabricated by sequential adsorption of TiO₂ nanoparticles and poly(3‐thiophene acetic acid) (PTAA). Each layer of the nanoparticles and PTAA in the thin film has also been characterized by x‐ray photoelectron spectroscopy, atomic force microscopy, and UV‐visible spectroscopy. These types of multilayered nanocomposite films may find applications in the fabrication of efficient light harvesting photovoltaic cells.     

Benzyl Bromide Functionalized Poly(Phenyleneethynylene)s as Macroinitiators in the Atom Transfer Radical Polymerization of Methyl Methacrylate

Abstract

The behavior of benzyl bromide functionalized poly(phenyleneethynylene)s as macroinitiators in the atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was investigated. The ¹H NMR observation of the ATRP using the exclusively para‐linked poly(phenyleneethynylene) macroinitiator PPE1A, and the low molecular weight initiator R‐BzBr, respectively, revealed lower reactivity for the macroinitiator. Comparison of graft copolymers, which were obtained from ATRP of MMA with PPE1A and the partially meta‐linked poly(phenyleneethynylene) PPE1B, showed higher reactivity in the case of PPE1B, expressed by a larger degree of polymerization in the PMMA side chains, as well as higher initiatior efficiency. This might be caused by better solubility of the less symmetric PPE1B. Investigation of the graft copolymers PPE2A and PPE2B was carried out by means of ¹H NMR spectroscopy, gel permeation chromatography (GPC) as well as UV/vis spectroscopy. Impairment of the delocalized π‐electron system of the conjugated polymers during the ATRP was not detectable.     

Mild conversion of propargylic alcohols to α,β-unsaturated enones in ionic liquids (ILs); a new ‘metal free’ life for the Rupe rearrangement

A mild and selective transition metal free protocol for the conversion of propargylic alcohols to cyclic and acyclic α,β-unsaturated enones via the Rupe rearrangement is reported. The method utilizes the Brønsted acidic ionic liquid [BMIM-SO₃H][OTf] as catalyst and [BMIM][PF₆] as solvent and offers the potential for recycling and reuse of the IL solvent. The feasibility to synthesize bicyclic fused cyclopentenone derivatives via a Rupe → Aldol → Nazarov sequence utilizing this protocol has also been demonstrated.     

可控液体输运制备取向聚合物薄膜:面向性能增强的发光二极管

提出了一种由锥形纤维阵列引导的定向液体输运的简单策略, 实现了对聚二芳基芴(PODPF)的有序 排列. 通过热退火处理(～240 ℃), PODPF由无定形相转变为β相态, 制备的PODPF薄膜具有一定的取向性 并且结晶尺寸更大. 在去浸润过程中, 锥形纤维阵列能够精确控制三相接触线的后退, 从而使得共轭高分子在产生的定向应力作用下定向排列. 基于此制备了聚合物发光二极管(PLEDs)器件, 与由旋涂膜制备的器件相比具有更高的电流效率(1.53 cd/A)和更稳定的电致发光. 表明利用锥形纤维阵列可以制备高性能的有机发光 二极管.     

Benzothiadiazole-based Conjugated Polymers for Organic Solar Cells

Benzothiadiazole(BT) is an electron-deficient unit with fused aromatic core, which can be used to construct conjugated polymers for application in organic solar cells(OSCs). In the past twenty years, huge numbers of conjugated polymers based on BT unit have been developed,focusing on the backbone engineering(such as by using different copolymerized building blocks), side chain engineering(such as by using linear or branch side units), using heteroatoms(such as F, O and S atoms, and CN group), etc. These modifications enable BT-polymers to exhibit distinct absorption spectra(with onset varied from 600 nm to 1000 nm), different frontier energy levels and crystallinities. As a consequence, BT-polymers have gained much attention in recent years, and can be simultaneously used as electron donor and electron acceptor in OSCs, providing the power conversion efficiencies(PCEs) over 18% and 14% in non-fullerene and all-polymer OSCs. In this article, we provide an overview of BTpolymers for OSCs, from donor to acceptor, via selecting some typical BT-polymers in different periods. We hope that the summary in this article can invoke the interest to study the BT-polymers toward high performance OSCs, especially with thick active layers that can be potentially used in large-area devices.     

Morphology controllable conjugated network polymers based on AIE-active building block for TNP detection

Luminescent conjugated network polymer is one of the most promising chemo-sensors owing to their good chemical/optical stability and multiple functionalization.Herein,three conjugated network polymers were prepared by using aggregation-induced emission active 1,1,2,2-tetrakis(4-formyl-(1,1'-biphenyl))-ethane(TFBE) unit as monomer and hydrazine as linker.Through regulating the synthetical condition,the polyme ric network can form either unifo rm two-dimensional azine-linked nanosheets(ANS),conjugated microporous polymers(A-CMP) or covalent organic frameworks(A-COF).All of these polymers exhibited good stability and high fluorescence quantum efficiency with the quantum yield of6.31% for A-NS,5.26% for A-CMP,and 5.80% for A-COF,as well as fast and selective fluorescence quenching response to 2,4,6-trinitrophenol(TNP).And the best TNP sensing performance with the Stern-Volmer constants(K_(sv)) values up to 8 × 10~5 L/mol and a detection limit of 0.09 μmol/L was obtained for A-NS.The study explores various strategies to construct conjugated polymers with different nanoarchitectures based on the same building block for sensitive detection of explosives.     

Conjugated polymer nanoparticles as fluorescence switch for selective cell imaging

Fluorescence switch plays a vital role in bioelectronics and bioimaging.Herein,we presented a new kind of facile electrostatic complex nanoparticles(ECNs)for fluorescence switching in cells and marking of individual cell.The ECNs were prepared by mixing positively charged poly(6-(2-(thiophen-3-yl)ethoxy)hexyl trimethylammonium bromide)(PT)and negatively charged diarylethene sodium salt(DAECOONa).DAE-COONa is a photoswitchable molecule which can be transformed between the ring-closed fo rm and ring-open form under the irradiation of UV or visible light.The closed-form of DAE-COONa can efficie ntly quench the fluorescence of PT through intermolecular energy transfer,while the open form of DAE-COONa does not influence the emission of PT.Thus,the fluorescence of ECNs can be modulated by light irradiation,and the ECNs with good fluorescence switching performance have been employed for fluorescence imaging and individual cell lighting up process successfully.We demonstrate that the electrostatic complex strategy provides a facile method to construct fluorescence switch fo r selective cell marking and imaging applications.     

Photo-irradiation effects on the surface morphology of poly(p-phenylene vinylene) films

In this work, we have studied the surface morphology of photo-irradiated poly(p-phenylene vinylene) (PPV) thin films by using atomic force microscopy (AFM). We have analyzed the first-order statistical parameters, the height distribution and the distance between selected peaks. The second-order statistical analysis was introduced calculating the auto-covariance function to determine the correlation length between heights. We have observed that the photo-irradiation process produces a surface topology more homogeneous and isotropic such as a normal surface. In addition, the polymer surface irradiation can be used as a new methodology to obtain materials optically modified.