Forced-air precooling of spherical foods in bulk: A parametric study

In this paper, a mathematical model for forced-air precooling of spherical food products in bulk is developed. The foods are arranged in horizontal layers stacked one above the other to form a rectangular parallelepiped with a vertical gap in between the product layers. The foods are cooled by chilled air blown along the height of the package. The governing equations for the conduction heat transfer in the foods, simultaneous heat and mass transfer at the food-air interface and in the air stream are solved numerically using finite-difference methods. A comprehensive numerical study is performed by varying the process parameters over a wide range. Typical results showing the variation of moist air properties along the height of the package and the effect of each parameter on the process time are presented. The ranges of parameters for advantageous operation of the precooling system are identified. Correlations are obtained for the process time based on the product center and mass-averaged temperatures in terms of process parameters.     

三维流动传热空隙率计算程序FASTOR—3D开发研究

1引言大粘度（大r）和大系数（ss和sc）法是处理流动区域中障碍物的常用方法山。但当流动区域中障碍物数量较多时，宜采用空隙率来模拟障碍物，如模拟反应堆流动传热的商用程序COMMIX［’］。我们根据空隙率模拟的基本概念，针对采用交错网格的压力校正法，自行编制了多障碍物流动传热三维计算的全部源程序代码，应用于某核反应堆钠池流动传热的数值模拟，获得了比较合理的结果。2数学模型和数值方法2．1控制方程空隙率修整的质量、动量、能量及湍流动能与耗散率的守恒方程通式的三维柱坐标形式为其中中一1，。，。，。，T，k，。分别表…     

非共沸制冷剂R417A在水平光滑管内的沸腾传热

应用一种快速、准确的隐式格式迭代数值计算方法 ,对非共沸制冷剂 R41 7A在水平光滑管内的蒸发过程进行了数值模拟。通过应用纯质的传热公式计算后与实验值相比较 ,数值计算结果高于实验值。     

Continuous dependence on the geometry and on the initial time for a class of parabolic problems I

In this paper, we investigate the continuous dependence on the geometry and the initial time for solutions u( x , t) of a class of nonlinear parabolic initial‐boundary value problems. Copyright © 2007 John Wiley & Sons, Ltd.     

不连续双斜向内肋管纵向涡流动显示

利用染色线流动显示方法,显示并分析了不同雷诺数下不连续双斜向内肋管管内流场。流动显示实验结果表明不连续双斜向内肋管管内存在较强的贴近壁面的纵向涡,纵向涡沿流向可持续约一倍管径距离,并且纵向涡的强度随雷诺数的增加而增强。     

双面电弧焊接的传热模型

将等离子焊接(PAW)电弧和钨极氩弧焊(TIG)电弧串接,相对作用于工件的正反面形成双面电弧焊接(DSAW)系统,可以引导焊接电流沿工件厚度方向流过小孔,补偿等离子电弧穿透工件时消耗的能量,以有效地提高等离子弧的穿透能力.综合考虑影响双面电弧焊接正反面熔池几何形状的力学因素,建立了熔池表面变形的控制方程,以此为基础并采用帖体曲线坐标系建立了DSAW焊接传热的数学模型,分析了DSAW,PAW焊接传热的差异,从传热的角度解释了DSAW焊接熔深增加的原因.焊接工艺实验表明,计算结果与实测结果吻合良好. 关键词： 双面电弧焊接(DSAW) 传热模型 熔池表面变形模型     

空气比热容比实验的非绝热问题

通过一系列的实验数据分析，发现空气比热容比实验中非绝热现象不可以忽略．     

Improved bounds for some nonstandard problems in generalized heat conduction

We consider the Maxwell-Cattaneo system of equations for generalized heat conduction where the temperature and heat flux satisfy a nonstandard auxiliary condition which prescribes a combination of their values initially and at a later time. We obtain L₂ bounds for the temperature and heat flux by means of Lagrange identities. These bounds extend the range of validity for the parameter in the nonstandard condition under a constraint on the coefficients in the differential equations.     

地源热泵的运行特性模拟研究

依据圆柱源理论,建立起了耦合地面热泵机组和地下埋管换热器特性的模拟模型,该模型可用于长期运行的地源热泵系统的短时间步长运行特性模拟。探讨了模拟过程中有关参数的确定方法,并运用所建模型对地源热泵的冬季和夏季运行特性进行了模拟。运行特性模拟与实验数据的验证结果表明,所建模型可以对地源热泵的运行特性做出符合实际的预测。     

水平管外强化凝结传热的数值解

以Nusselt理论为基础,运用三维坐标建立了肋片侧面的冷凝传热模型,对肋片侧面的冷凝传热机理进行了分析,得出了肋片侧面表面传热系数的积分表达式。利用此法对水平环肋单管表面传热系数进行计算并将结果与传统解法进行比较。