Thermal and mechanical properties of PE/organoclay nanocomposites

Polyethylene/montmorillonite clay nanocomposites were obtained via direct melt intercalation. The clay was organically modified with four different types of quaternary ammonium salts. The objective of this work is to study the use of montmorillonite clay in the production of nanocomposites by means on rheological, mechanical and crystallization properties of nanocomposites and to compare to the properties of the matrix and PE/unmodified clay nanocomposites. In general, the tensile test showed that the yield strength and modulus of the nanocomposites are close to the pure PE. Apparently, the mixture with Dodigen salt seems to be more stable than the pure PE and PE/unmodified clay.     

聚氯乙烯／线性低密度聚乙烯共混体系的相容性

用动态力学分析（ＤＭＡ）和傅利叶变换红外光谱（ＦＴＩＲ）研究了氢化聚丁二烯－ｂ－聚甲基丙烯酸甲酯（ＨＰＢＤ－ｂ－ＰＭＭＡ）共聚物增容剂对聚氯乙烯（ＰＶＣ）与线性低密度聚乙烯（ＬＬＤＰＥ）共混体系的增容作用．增容剂使共混物中两相的玻璃化温度发生变化，说明其相容性增加．ＦＴＩＲ的结果表明，增容剂中羰基与ＰＶＣ的α氢形成氢键，使ＣＯ，Ｈ─Ｃ及Ｃ─Ｃｌ的振动频率变化，峰形加宽．     

Synthesis and characterisation of advanced UHMWPE/silver nanocomposites for biomedical applications

A supercritical fluid (SCF) route for facile and homogeneous introduction of silver nanoparticles into polymer hosts is described. Our focus is on ultra-high molecular weight polyethylene (UHMWPE). We demonstrate that the metallic nanoparticles have a substantial effect upon the wear and tribochemical properties of the polymer substrate.     

聚乙二醇对纳米二氧化钛性质和应用的影响

二氧化钛纳米晶光催化材料是近年来发展起来的新型环境友好材料,国内外研究者在利用二氧化钛纳米晶光催化降解苯酚、氯酚、甲醛等污染物方面做了大量的研究工作。研究表明TiO2的3种晶型,锐钛矿型、金红石型和板钛矿型中,有光催化作用的主要是锐钛型和金红石型,其晶型和晶粒大小     

HPLC and GC Methods for Determination of Lubricants and Their Evaluation in Analysis of Real Samples of Polyethylene

High performance liquid chromatography (HPLC) and gas chromatography (GC) are introduced for analysis of polymer lubricants (stearamide, oleamide and erucamide). In the HPLC method, a reverse phase octadecylsilane (ODS) column along with acetonitrile/methanol (60:40) as a mobile phase were used. Detection of analytes was performed by a UV detector at 202 nm. The analysis time was less than 8 min. In the GC method, polar capillary column and flame ionization detector (FID) were used for separations and detection, respectively. The analysis time by GC was longer than HPLC and was about 30 min. Limits of detection, linear range and repeatability of both methods are similar, but determination of oleamide in real samples by HPLC method is difficult due to complexity of the initial part of HPLC chromatogram in polyethylene samples. That problem is not observed in the GC method. Detection limits in both methods for all analytes are lower than 0.003% which are much lower than the amount of lubricants in commercial polymers (0.05–0.2%).     

Morphology and crystallization of blends of linear low density polyethylene with a semiflexible liquid crystalline polymer

The morphology and the crystallization behavior of blends of linear low density polyethylene (LLDPE) with an experimental sample of a semiflexible liquid crystalline polymer (SBH 112 by Eniricerche, Italy) have been studied by differential scanning calorimetry (DSC), polarized optical microscopy (POM) and scanning electron microscopy (SEM). The blends possess a two-phase morphology, due to immiscibility of the two components. SEM observations show that dispersion of the minor SBH phase is favored at low (相似文献   

A facile approach to surface graft vinyl acetate onto polyolefin articles

A facile and environment friendly approach was developed to graft vinyl acetate (VAc) onto plastic articles in an aqueous solution using tert‐butyl alcohol (TBA) as a compatiblizer and benzoyl peroxide (BPO) as an initiator. In a novel setup, excessive monomer suspended in a water phase, VAc could be conveniently grafted on the model substrate of low‐density polyethylene (LDPE) film and the graft percentage (GP) could be developed up to 7.3%. Reaction temperature could increase GP significantly, while adding monomer over a critical volume did not influence GP. By adding some paradioxybenzene, i.e. 0.06–0.08% in VAc phase, homopolymer PVAc could be avoided practically, while graft polymerization proceeded favorably in aqueous solutions. It was proved by attenuated total reflection‐infrared (ATR‐IR) spectroscopy that grafted VAc was located mainly at the surface of the LDPE film and hydrophilic nature of both grafted and alcoholyzed films were improved via contact angle measurements. Copyright © 2004 John Wiley & Sons, Ltd.     

Quantitative Comparison Between Vacuum-Ultraviolet Irradiation and Remote Hydrogen Plasma Treatment of Hydrocarbon Polymers

The photon flux of vacuum ultraviolet (VUV) and ultraviolet (UV) radiation of a hydrogen plasma with and without a MgF₂window was recorded by fluorescence measurements of sodium salicylate layers. After the compensation of the MgF₂absorption by increasing the input power into the plasma source, a comparison between afterglow hydrogen plasma and VUV treatments was made. Polyethylene (PE), polypropylene (PP), and polystyrene (PS) were treated either with VUV radiation or with remote hydrogen plasma and mass loss and CH absorption loss were measured by a quartz crystal microbalance and by infrared reflection absorption spectroscopy, respectively. In the case of PE the effects of both treatments were found to be very similar white for PP slight differences were observed. For the actual set of experimental conditions, the radiation component is largely responsible for the efficiency of the plasma treatment. VUV and remote hydrogen plasma treatments of PS showed only a negligible loss of mass and CH absorption.     

聚乙二醇蓄热调温性能及其在功能纺织品上的应用

对聚乙二醇(PEG)的自身交联及其与纤维素纤雏之间的交联反应进行了研究，探讨了交联前后PEG热活性的变化，并对PEG在焙烘交联时的受热稳定性以及分子量对热活性的影响进行了讨论。研究表明，PEG发生交联反应后，热性能参教产生偏移，热活性降低；热活性与分子量有直接关系；过高的焙烘温度将导致PEG氧化降解，热活性下降。在适宜的工艺条件下，纺织品经PEG后整理可获得热活性。     

自增强高性能聚合物的成型工艺同力学性能间相关性研究——1.超高分子量聚乙烯的应力诱导结晶理论和其自增强作用

本文发展了一种高分子量聚合物熔融体的应力诱导结晶结构形态模型,它是由微晶聚集体(以下简称微区)-高分子链组网和缠结网的网络结构组成。基于上述模型,把二种网中的单个链组作为独立的统计单元和形变单元,计算了二种网中单个链组的末端距分布函数,进一步计算了二种网和总网的形变自由能。在此基础上,讨论了诱导结晶结晶机理和自增强聚合物网络自由能的依赖性,并着重地研究了超拉伸高聚物的起始熔点拉伸比间的关系。用超高分子量聚乙烯膜和超取向高密度聚乙烯纤维的起始熔点和拉伸比的实验数据进行处理,得到理论予期的近似直线关系,初步验证了聚合物网应力诱导结晶理论。