Multiplex chemiluminescence microscope imaging of P16INK4A and HPV DNA as biomarker of cervical neoplasia

Classification of cervical intraepithelial neoplasia (CIN) lesions in low-grade (CIN1) or high-grade (CIN2-3) ones is crucial for optimal patient management, but current histological diagnosis on bioptic samples is often hampered by inter-observer variability. To allow objective classification, we have exploited the peculiar characteristics of chemiluminescence detection, such as high sensitivity and easy quantification of the luminescence signal, to perform sequentially in the same tissue section both an immunohistochemical quantitative detection of p16^INK4A (a protein marker of high-grade CIN lesions) and an in situ hybridization for human papillomavirus (generally accepted as a necessary but insufficient cause of cervical carcinoma). Different label enzymes (alkaline phosphatase and horseradish peroxidase) were employed in order to avoid any interference between the two assays, and quantitative chemiluminescence image analysis was used to obtain objective evaluation of sample positivity. The multiplexed method allowed detection of two complementary biomarkers and provided discrimination between different lesions (non-neoplastic, low-grade and high-grade CIN). This assay might thus represent an accurate and objective diagnostic test providing important information for counseling, selection of therapy and follow up after surgical treatment.     

Magnetic bead-based approach to monitoring of cigarette smoke-induced DNA oxidation damage and screening of natural protective compounds

Cigarette smoking can damage DNA and induce spontaneous mutagenesis or carcinogenesis. Here, we describe a novel strategy for in situ monitoring of cigarette smoke-induced DNA oxidation damage and offer a method for screening natural compounds that protect DNA against tobacco smoke. The present protocol takes advantage of a fast and simple magnetic separation/mixing method and a highly sensitive chemiluminescence (CL) ELISA. The DNA immobilized on the magnetic beads was oxidized by the smoke in the absence or presence of natural compounds, and then oxidative DNA was conveniently held by magnetic force, whereas the complex tobacco smoke matrix and any remaining compounds were completely eliminated by extensive washing, and possible interferences were thus removed and oxidative damage was then sensitively monitored by CL ELISA. A library of 32 natural products was then screened and three were found to protect DNA from oxidative damage and thus may be promising compounds for the development of new drugs. Moreover, the protection effect of these three natural compounds against DNA oxidation damage was successfully classified by directly spiking them in the reference cigarettes. In addition, the potential to screen a mixture in a complex sample matrix, such as crude extracts, was also demonstrated, and hence the proposed technique can screen compounds within a complex matrix and enhance the screening throughput.     

Rapid flow injection method for the determination of sulfite in wine using the permanganate-luminol luminescence system

A simple, rapid and sensitive chemiluminescence method for the determination of sulfite has been developed by combining flow-injection analysis and its sensitizing effect on the known chemiluminescence emission produced by the oxidation of luminol in alkaline medium; in this work permanganate has been proposed as oxidizing reactive. The optimum conditions for the chemiluminescence emission were established. The chemiluminescence was proportional to the sulfite concentration over the range 1.6 × 10⁻⁵ and 4.0 × 10⁻⁴ mol L⁻¹. The detection limit was 4.7 × 10⁻⁶ mol L⁻¹ of sulfite. The method has been satisfactorily used for the determination of free and bound sulfite in wines.     

Automated chemiluminescent dual-analyte immunoassay based on resolved immunosensing channels

A novel system of series-wound immunosensing channels (SWIC) was proposed for automated chemiluminescent (CL) dual-analyte immunoassay by immobilizing respectively different capture antibodies on the inner walls of series-wound glass channels. This system could use a single enzyme as label to perform multiplex immunoassay in one fluid way. Using α-fetoprotein (AFP) and carcinoembryonic antigen (CEA) as model analytes, the mixture including AFP, horseradish peroxidase (HRP)-labeled anti-AFP antibody, CEA and HRP-labeled anti-CEA antibody was introduced into the SWIC for carrying out the on-line incubation. Upon injection of CL substrate the CL signals from the two immunosensing channels were conveniently resolved and near-simultaneously collected with the aid of optical shutter. AFP and CEA could be rapidly assayed in the ranges of 1.0-100 and 1.0-80 ng/ml with detection limits of 0.41 and 0.39 ng/ml, respectively. The assay results of clinical serum samples were in an acceptable agreement with the reference values. This designed flow-through immunosensing system based on SWIC provided an automated, reusable, simple, sensitive and low-cost approach for multianalyte immunoassay.     

Determination of bisphenol A based on chemiluminescence from gold(III)-peroxymonocarbonate

Peroxymonocarbonate (HCO₄⁻) was produced by the online reaction of bicarbonate with hydrogen peroxide. A strong chemiluminescence (CL) was observed when HCO₄⁻ reacted with AuCl₄⁻ without any special CL reagent. When bisphenol A (BPA) was added to AuCl₄⁻-HCO₄⁻ CL system, the CL emission was inhibited significantly. This new CL system was developed as a flow-injection method for the determination of BPA. Under the optimum experimental conditions, the inhibited CL intensity was linearly related to the concentration of BPA from 0.3 to 80 μM (R = 0.9958). The detection limit of BPA was 0.08 μM. The relative standard deviation for 12 repeated measurements of 1.0 μM BPA was 2.9%. The interferences of some cationic ions can be removed by an online cation-exchange column. The applicability of the present CL system was demonstrated for the sensitive and selective determination of BPA in real samples (mineral water bottle, baby bottle, beverage bottle and polycarbonate container). Based on the CL spectrum, UV-visible adsorption spectra, and the quenching effect of reactive oxygen species scavengers, a possible CL mechanism was proposed.     

The effect of dyes on photo-induced chemiluminescence emission from polymers

Weak photo-induced chemiluminescence (PICL) emission is observed when polymers are exposed to UVA or visible light. The presence of dyes can either increase PICL intensity via Type I photosensitisation which generates polymer free radicals, or reduce it via photo-protection. PICL studies on the eight Blue Wool Standards (BWSs) that are used commercially as lightfastness standards show higher PICL intensity from the least photostable BWSs that use triphenylmethane dyes and lower intensity from more photostable BWSs using UVA and visible wavelengths. The relative PICL intensities do not correlate in a stepwise manner with lightfastness ratings of the BWSs. However dye/polymer combinations that emit high levels of PICL relative to the undyed material are unlikely to have acceptable lightfastness. The xanthene dyes fluorescein and eosin Y are more strongly photosensitising than triphenylmethane dyes on wool and both produce higher PICL emission than undyed wool when irradiated with visible light.     

Photodegradation of polyethylenes: Comparative effect of Fe and Ca-stearates as pro-oxidant additives

The effect of iron and calcium stearates on the degradation of polyethylene (LDPE and LLDPE), under natural and artificial exposure, has been studied. The activity of stearates has been evaluated by chemiluminescence and FTIR of polyethylenes. The analysis of the molecular weight changes and content of degradation products identified by GC-MS during ageing process confirmed their pro-degrading activity. Films containing stearates exhibited lower CL emission, and revealed the higher efficiency of Fe-Stearate compared to Ca-Stearate in decomposing hydroperoxides, leading to higher degradation during processing. The results were confirmed by TGA analysis, where the weight loss onset and T_max shifted to lower temperatures in polyethylenes with incorporation of Fe- and Ca-stearates compared to pure polymers.Polyethylenes were outdoor and accelerated exposed, and CL measured at different period of times. Chemiluminescence temperature-ramping tests under nitrogen showed the formation of a peroxide peak at lower temperature, and a significant increase in carbonyl index for PE containing stearates was found by FTIR. The results were supported by GC-MS, where the concentration of extracted products identified in the polyethylenes containing Fe-stearate was significant, and a much greater decrease in molecular weight was determined by GPC, which confirmed the development of degradation for polyethylenes with Fe-Stearates in comparison to pure or Ca-stearate polyethylenes.     

Effects of ozone in surface modification and thermal stability of SEBS block copolymers

SEBS block copolymers were treated under mild conditions in an ozone atmosphere, producing very slightly chemically-modified surfaces. The thermal stability was analysed by chemiluminescence and related to morphological changes observed by AFM. The intrinsic thermal stability was diminished by ozone exposure, but the oxidation induction times were delayed which indicates an enhancement of thermal stability under oxidative conditions. Also, chemiluminescence analysis showed the presence of a typical order-disorder transition at temperatures around 120 °C. Two different sets of samples which showed different morphological patterns were imaged by AFM. The effects of micro-domain separation and inter-domain structure on thermal properties are discussed and explained by a coarsening of the internal interface induced by ozone. A detailed 2D Fourier transformed analysis of AFM images allowed us to identify a regular wrinkled nano-pattern induced by uniaxial strain combined with ozone treatment, offering new opportunities in applications ranging from organic electronics to bio-patterning.     

溶胶凝胶固定化酶流动注射化学发光法测定人体血清中的胆固醇

采用溶胶凝胶技术分别固定了胆固醇脂酶和胆固醇氧化酶,制成固定化酶柱;人体血清中胆固醇脂在胆固醇脂酶的催化作用下生成胆固醇,胆固醇在胆固醇氧化酶的催化作用下被氧化产生H2O2,将其与鲁米诺发生耦合的化学发光反应,在模拟酶血红蛋白的催化作用下产生较强的化学发光。结合流动注射技术,建立了溶胶凝胶固定化酶流动注射化学发光法测定胆固醇的新方法。实验发现,发光强度与胆固醇的浓度在一定范围内呈良好的线性关系,总胆固醇的线性范围为1.01×10-6～2.02×10-4mol/L(r=0.9975);检出限为7.5×10-7mol/L;游离胆固醇的线性范围为5.0×10-8～2.18×10-5mol/L(r=0.9991);检出限为5.0×10-9mol/L。用生化分析仪(东芝TBA-120FR)与本方法进行对照,两种方法无显著性差异。本方法已应用于临床血清样品中胆固醇的检测。     

反相流动注射化学发光法测定黄芩苷

在碱性介质中,K3Fe(CN)6氧化鲁米诺产生化学发光,黄芩苷对该体系化学发光具有强烈的抑制作用。利用该化学发光的抑制体系,结合反相流动注射技术,建立了测定黄酮类药物黄芩苷含量的新方法。在优化的条件下,黄芩苷浓度在1.0×10-8～1.0×10-7和3.0×10-7～4.0×10-6mol/L范围内与化学发光抑制强度ΔI呈良好的线性关系,检出限为1.0×10-9mol/L,对3.0×10-7mol/L的黄芩苷进行平行测定10次,得相对标准偏差(RSD)为1.7%。该方法可应用于银黄口服液中黄芩提取物(黄芩苷计)的含量测定。