光学活性化合物的工业合成

本文介绍了光学活性化合物研究现状及发展趋势。并从技术和经济角度论述了工业合成光学活性化合物的可能性     

锰的催化光度法测定现状与展望

介绍催化光度法测定锰的分析方法，讨论各显色体系中的灵敏度、测定范围和干扰情况，比较了测定锰的显色剂。引用文献58篇。     

高活性锆掺杂钴催化剂的制备及其催化甲烷燃烧性能研究

由水热法制备了掺杂锆摩尔百分比为0，10，20，30．40，50％的钴催化剂，该系列催化剂对甲烷的低温催化燃烧显示出高活性．其中，10％Zr掺杂的催化剂活性最好，可在370℃使甲烷转化率达100％．XRD分析表明，该法制得的催化剂中的活性四氧化三钴物种是由一种晶态的碳酸钴前体分解而成，Co3O4为粒径在20～40nm之问的纳米粒子．用热重分析(TG)研究了碳酸钴前体的热分解行为．     

TS分子筛催化性能研究Ⅰ．TS－2分子筛催化1，2－丙二醇液相氧化反应的研究

ＴＳ分子筛催化性能研究Ⅰ．ＴＳ－２分子筛催化１，２－丙二醇液相氧化反应的研究①伏再辉尹笃林（湖南师范大学精细催化合成研究所，长沙４１００８１）关键词ＴＳ－２分子筛１，２－丙二醇氧化催化氧化自１９８３年Ｔａｒａｍａｓｓｏ［１］首次合成具有ＺＳＭ－５结构...     

溶胶-凝胶法制备铁酸盐超微粒子催化剂

采用溶胶－凝胶法制备了含Zn,Ni,Co的铁酸盐超微粒子催化剂，运用DTA－TG、IR、XRD以及BET比表面测试等手段对所制备的样品进行了表征。同时，考察了铁酸盐对二氧化碳选择性氧化乙苯制苯乙烯的催化性能。结果表明：制备的铁酸盐均为尖晶石型晶体，粒子的比表面积为31．9－36．3m^2/g，晶粒大小约为30－35nm，在由二氧化碳选择性氧化乙苯制苯乙烯的反应中表现出较好的催化活性。     

Summary of ISO/TC 201 Standard XI. ISO 17974:2002—Surface chemical analysis—High‐resolution Auger electron spectrometers—Calibration of energy scales for elemental and chemical‐state analysis

This International Standard specifies a method for calibrating the kinetic energy scales of Auger electron spectrometers for elemental and chemical‐state analysis at surfaces. It is only applicable to instruments that incorporate an ion gun for sputter cleaning. This International Standard further specifies a method to establish a calibration schedule, to test for the kinetic energy scale linearity at one intermediate energy, to confirm the uncertainty of the scale calibration at one low and one high kinetic energy value, to correct for small drifts of that scale and to define the expanded uncertainty of the calibration of the kinetic energy scale for a confidence level of 95%. This uncertainty includes contributions for behaviours observed in interlaboratory studies but does not cover all of the defects that could occur. This International Standard is not applicable to instruments with kinetic energy scale errors that are significantly non‐linear with energy, to instruments operated at relative resolutions poorer than 0.2% in the constant ΔE/E mode or poorer than 1.5 eV in the constant ΔE mode, to instruments requiring tolerance limits of ±0.05 eV or less or to instruments equipped with an electron gun that cannot be operated in the energy range 5–10 keV. This standard does not provide a full calibration check, which would confirm the energy measured at each addressable point on the energy scale and should be performed according to the manufacturer's recommended procedures. Crown Copyright © 2003. Published by John Wiley & Sons, Ltd.     

萃取动力学光度法测定活化剂铝——铝(Ⅲ)-过氧化氢-铜(Ⅱ)-邻氨基酚/氯仿体系

研究了在pH 5.5的弱酸性介质中, 利用Al(Ⅲ)对Cu(Ⅱ)催化H2O2氧化邻氨基酚显色的指示反应的活化作用.用萃取平衡控制反应时间、水相中邻氨基酚的浓度和反应进行的程度.通过在424 nm下测量有机相的吸光度,建立了萃取催化光度法测定活化剂铝的新方法.方法的线性范围为0.004～0.25 mg/L,检出限为1.6×10 -6 g/L.用于水样和茶叶中铝含量的测定,结果满意.     

Thermal behavior of double salt schoenite

The thermal behavior of synthetic schoenite (K₂SO₄·MgSO₄·6H₂)) during heating has been studied by thermal methods. The temperatures of dehydration and decomposition of schoenite have also been determined by DTA, TG and DSC. The thermal reaction equations and the X-ray power diffraction results of the products have been given and the corresponding kinetic parameters have also been obtained.     

Nonenzymatic Glucose Detection with Good Selectivity Against Ascorbic Acid on a Highly Porous Gold Electrode Subjected to Amalgamation Treatment

A nonenzymatic glucose sensor with good selectivity for the ascorbic acid oxidation is presented. After the gold polycrystalline electrode was subjected to amalgamation treatment, two advantageous effects were observed. One is the enhancement of the surface roughness and the other is an increase in the catalytic current in the glucose oxidation. Besides the known first effect, the latter provided another advantageous effect in a fabrication of nonenzymatic glucose sensor. Using a gold electrode subjected to amalgamation treatment for 60 s, two calibration curves for glucose oxidation at two different potentials of ?0.1 V and 0.25 V were obtained and compared. At the potential of ?0.1 V, at which no ascorbic acid was oxidized and no interference effect was observed, a current sensitivity of 16 μA cm^?2 mM^?1 from zero to 10 mM glucose concentration range was obtained. At the other potential of 0.25 V, at which ascorbic acid was easily oxidized, a satisfactory calibration curve with negligible ascorbic acid interference was also obtained together with a more enhanced current sensitivity of 32 μA cm^?2 mM^?1.     

Ru/Mn-Ce/TiO2催化剂催化湿式氧化丁二酸的反应活性和动力学研究

在二氧化钛载体中通过掺杂Ru，Mn，Ce制备了一系列用于催化湿式氧化的催化剂，利用XRD，TEM，BET等手段对催化剂进行了表征．在反应温度T=210～270℃，氧分压Po2=2．1MPa条件下，在间歇式高压反应釜中对丁二酸进行了降解实验．催化剂在反应中有很高的催化活性．催化剂在30min内对丁二酸降解的COD去除率为54．4～98．3％．Ru及Mn，Ce的氧化物对催化活性都有促进作用．建立了丁二酸催化湿式氧化的一级分段动力学模型．基于COD的一段及二段反应的活化能分别为43．74kJ／mol和54．28kJ／mol．