碳纤维微电极恒电位活化及测定金属离子的研究

碳纤维微电极已被广泛应用于电化学研究和分析测定,该电极尺寸极小,在分析性能上与常规电极有显著不同,在不镀汞的情况下,用碳纤维电极直接测定金属离子几乎没有明显的伏安响应,本文提出用+2.5 V恒电位预先活化碳纤维电极,使测定灵敏度大为提高,在双电极体系和静止溶液中,采用溶出伏安法可测定10~(-9)级金属离子,以同样的方法清洗电极,测定结果重现性良好,由于分析过程中不使用汞,该电极的测定范围大大增加,特别是用于氧化还原电位较正的金属离子测试,根据循环伏安法、扫描电镜和电子能谱的研究,发现碳纤维表面状况在处理前后有很大变化,并与测定灵敏度密切相关。     

破碎-絮凝法分离细长碳纳米管与碳纤维

根据碳纤维与细长碳纳米管耐磨性能与絮凝沉降性能的差异，提出了一种有效分离细长碳纳米管与碳纤维的物理方法——破碎-絮凝法.该方法包括研磨破碎、液相分散、絮凝沉降、过滤分离等步骤，可高效去除混杂于细长碳纳米管样品中的碳纤维，同时还可去除螺旋状碳纤维及细小碳颗粒等易悬浮杂质.纯化过程对细长碳纳米管无损伤.用电子显微镜和热重分析表征了纯化效果，并初步分析了纯化机理.     

二氧化碳和氧气的快速电化学方法联合测定

根据Ｏ２和ＣＯ２在二甲亚砜（ＤＭＳＯ）介质中Ｐｔ电极上的伏安特性，采用微电极并结构计算机控制的电位调制技术，建立了快速联合测定ＣＯ２和Ｏ２的调制电位脉冲库仑法和调制电位脉冲电流法，取得了满意的结果。一次测量时间快达４０ｍｓ。ＣＯ２检测范围０￣１０％（体积百分比）；Ｏ２检测范围不受限制。通过编程设计特定的调制电位－时间波形，可保持连续检测的长期稳定性。     

Synthesis of multi-walled carbon nanotubes catalyzed by substituted ferrocenes

A range of substituted ferrocenes were used as catalysts for the synthesis of multi-walled carbon nanotubes (MWCNTs) and carbon fibers (CFs). These products were obtained in the temperature range 800-1000 °C, in a reducing atmosphere of 5% H₂ by pyrolysis of (CpR)(CpR′)Fe (R and R′ = H, Me, Et and COMe) in toluene solution. The effect of pyrolysis temperature (800-1000 °C), catalyst concentration (5 and 10 wt.% in toluene) and solution injection rate (0.2 and 0.8 ml/min) on the type and yield of carbonaceous product synthesized was investigated. Carbonaceous products formed include graphite film (mostly at high temperature; 900-1000 °C), carbon nanotubes and carbon fibers. The carbonaceous materials were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman spectroscopy. The ferrocene ring substituents influenced both the CNT diameter and the carbon product formed.     

带甲基侧基的环氧树脂增容剂对炭黑在丁苯橡胶中分散度的影响

用自制的带甲基侧基的环氧树脂(TMBP)作为界面增容剂, 从拉伸性能、键合胶含量、动态性能、扫描电镜和流变性能等方面, 研究了TMBP对炭黑在丁苯橡胶中分散度的影响, 并与市售通用双酚A型环氧树脂(E-51)和橡胶工业常用软化剂邻苯二甲酸二辛酯(DOP)进行了比较. 结果表明, 带甲基侧基的环氧树脂TMBP在提高炭黑分散性方面的效果远比E-51好， 其作用模式具有典型的增容特性.     

Kinetic and computational studies on aminolysis of bicyclic carbonates bearing alicyclic structure giving alicyclic hydroxyurethanes

Aminolysis of bicyclic carbonates, which consist of five-membered cyclic carbonate and five- or six-membered alicyclic groups, was examined. Kinetic studies revealed that the aminolysis of the bicyclic carbonate with cyclohexane ring proceeded more smoothly than that of the bicyclic carbonate with cyclopentane ring. Computational calculation suggested that the different reaction rates originate from the distinct ring-strain of the cyclic carbonate groups affected by the conformation of the alicyclic groups.     

A Theoretical Study on the Conductivity of Carbon Doped BNNT

From the changes in energy band, density of state (DOS) and electronic structure calculated by the DFT/B3LYP method, the conductivity of carbon doped boron‐nitride nanotube (BNNT), which is formed by C‐C bond substituting B‐N bond, was discussed. The results indicate that the substitution will strengthen the conductivity of the tube, and its semi‐conductivity might be adjusted by controlling the substitution.     

Practical synthesis of S-alkyl thiocarbamate herbicides by carbonylation of amines with carbon monoxide and sulfur

An industrial and economic carbonylation of amines with carbon monoxide and sulfur has been developed for the synthesis of S-alkyl thiocarbamate herbicides. In the presence of potassium carbonate and solvent DMSO, S-alkyl thiocarbamates, such as thiobencarb and orbencarb (herbicides) are synthesized in excellent yields from amines, carbon monoxide, sulfur, and alkyl halides under mild conditions (1 atm, 20 °C).     

CO和CH_30N0在Al_20_3负载钯铜合金催化剂上合成草酸二甲酯的原位红外光谱研究

利用原位红外光谱技术研究了常压下CO和CH3ONO多相催化合成草酸二甲酯的反应．发现在草酸二甲酯生成的同时还存在副反应，副产物NO继续与CO反应生成CO2和N2O．铜在合金催化剂中起辅助作用，铜分散把，使CO桥式吸附减少，线式吸附增多．主反应与CO桥式吸附无关，而副反应却依赖于CO的桥式吸附．CO线式吸附具有更高的反应活性．     

Electroreduction of α-glucose on CNT/graphite electrode modified by Zn and Zn–Fe alloy

Electroreduction of -glucose to form sorbitol on Zn/CNTs and Zn alloy/CNTs electrodes has been investigated in this paper. Carbon nanotubes (CNTs) used in this paper are grown directly on graphite disks by chemical vapor deposition. Zn and Zn alloy are electrodeposited on the activated CNTs/graphite electrode by pulse galvanostatic method. The micrographs of Zn/CNTs and Zn alloy/CNTs electrodes are characterized by scanning electron microscopy. The results show that the current efficiency of -glucose reduction on CNTs electrodes is much better than that on flat Zn electrodes. The order of the current efficiency on different electrodes is as follows: Zn/CNT (0.58) Zn–Fe/CNT (0.57)>Zn–Ni/CNT (0.43) Zn/graphite (0.42)>Zn (0.40). It indicates that CNTs have good potential application in electrosynthesis. Additionally, effects of some operating parameters, such as pH, temperature and -glucose concentration, on the current efficiency of -glucose reduction are also discussed.