室温CO催化氧化反应动力学的研究

本文采用无梯度反应器,考察了纳米金催化剂以及其它商品化的催化CO氧化催化剂,在不同CO浓度下催化CO氧化反应的转化率和反应速率,证明在CO初始浓度从ppm到pct数量级范围内,纳米金催化剂具有最好的催化CO室温转化的能力.     

负载Pt,Pd催化剂上NO—TPD和NO催化还原性能

负载Ｐｔ、Ｐｄ催化剂上ＮＯ－ＴＰＤ和ＮＯ催化还原性能１）钟依均（浙江师范大学化学系金华３２１００４）罗孟飞周碧袁贤鑫（杭州大学催化研究所杭州３１００２８）关键词负载Ｐｔ、Ｐｄ催化剂ＮＯ－ＴＰＤＣＯ－ＮＯ反应分类号Ｏ６４３．３２氮氧化物（ＮＯｘ）污染是...     

Surface modification of γ-alumina membranes by silane coupling for CO2 separation

Top layers of γ-Al₂O₃ composite membranes have been modified by the silane coupling technique using phenyltriethoxysilane for improving the separation factor of CO₂ to N₂. The separation efficiency of the modified membranes was strongly dependent upon the hydroxylation tendency of the support materials and the amount of the special functional group (i.e. phenyl radical) which was coupled onto a top layer. The separation factor through the TiO₂ supported γ-Al₂O₃ membrane was found to be fairly enhanced by silane coupling, but in case of the -Al₂O₃ supported membrane was not. The CO₂/N₂ separation factor through the modified γ-Al₂O₃/TiO₂ composite membrane is 1.7 at 90°C and ΔP = 2 × 10⁵ Pa for the binary mixture containing 50 vol% CO₂. The separation factor is proportional to the CO₂ concentration in the gas mixture, and the modified membrane is stable up to 100°C. The main mechanism of the CO₂ transport through the modified γ-Al₂O₃ layer is known to be a surface diffusion.     

Characterization of Pt-Ru/C catalysts by X-ray absorption spectroscopy and temperature-programmed surface reaction

X-ray absorption spectroscopy (XAS) was employed to characterize carbon black supported Pt-Ru catalysts, which are commercially available to be utilized as the anode of polymeric-electrolyte-membrane fuel cells. Both Pt and Ru were found partially oxidized in the as-received form. Upon exposure to hydrogen at room temperature, the catalysts were completely reduced to the metallic state. The bimetallic nanoparticles on the Pt-Ru/C catalysts possess an inner core enriched in Pt, which is surrounded by a Ru-rich outer shell. Such a core–shell structure retained even at an elevated reduction temperature of 623 K. Temperature-programmed surface reaction (TPSR) was carried out to explore the reactivity of adsorbed CO toward hydrogen on various catalysts. Both the peak temperature of the TPSR profile and the amount of methane generated during the course of TPSR were sensitive to the surface composition of Pt–Ru nanoparticles. In combination of XAS and TPSR results, a slight difference in the nanostructure between two Pt-Ru/C catalysts was manifested.     

Zirconia supported La, Co oxides and LaCoO3 perovskite: structural characterization and catalytic CO oxidation

ZrO₂-supported La, Co oxide catalysts with different La, Co loading (2, 6, 8, 12 and 16 wt.% as LaCoO₃) were prepared by impregnation of tetragonal ZrO₂ with equimolar amounts of La and Co citrate precursors and calcination at 1073 K. The catalysts were characterized by X-ray diffraction (XRD), X-ray absorption spectroscopy (XAS), and BET specific surface area determination. Catalytic CO oxidation was performed at 298–800 K. XRD revealed the presence of tetragonal zirconia with traces of the monoclinic phase. LaCoO₃ perovskite was also detected for loading higher than 6%. XAS experiments suggested that at high loading LaCoO₃ and Co₃O₄ were formed, while at low loading, La, Co oxide species interacting with support, and hard to be structurally defined, prevailed. The catalysis study evidenced that the catalytic activity was due to segregated and highly dispersed cobalt oxide species.     

聚苯胺/二氧化钛复合薄膜的制备及其气敏性能

室温条件下, 运用静电力自组装和原位化学氧化聚合相结合的方法制备了聚苯胺/纳米二氧化钛(PANI/TiO2)复合薄膜和聚苯胺(PANI)薄膜, 并通过XPS和SEM对薄膜进行了分析表征. 采用平面叉指电极式器件制备了PANI/TiO2复合薄膜和PANI薄膜气体传感器, 研究了其在常温下对有毒气体NH3和CO 的敏感性能. 结果表明, PANI/TiO2复合薄膜较PANI薄膜具有更优的灵敏度和响应恢复特性.     

南瓜籽烘烤前后化学成分的分析

对烘烤前后南瓜籽中的化学成分进行分析并对比。采用同时蒸馏萃取装置萃取南瓜籽中的挥发性成分,采取超临界CO2萃取技术萃取南瓜籽油脂,并将其分为酸、碱、中性三个部分,用气相色谱-质谱联用方法分析其中化学成分并进行对比。结果表明,南瓜籽挥发性成分中含有多种醛类和酯类化合物,烘烤后产生了大量的烷基吡嗪,其在碱性部分中的相对含量比烘烤前提高14倍多,不饱和醛类化合物含量也有明显提高。南瓜籽油脂中的主要化学成分是油酸、亚油酸及其酯类。还含有生物活性功能成分如植物甾醇、角鲨烯和维生素E等。烘烤后除角鲨烯含量有所降低,维生素E、植物甾醇、亚麻酸等均有提高。     

Influence of promoters on the performance of Au/MnOx and Pt/SnOx/SiO2 low-temperature CO oxidation catalysts

The influence of promoters on Pt/SnO_x/SiO₂ and Au/MnO_x low-temperature CO oxidation catalysts has been investigated under stoichiometric reaction conditions with no CO₂ added to the feed gas. The performance of Pt/SnO_x/SiO₂ catalysts is improved significantly by the addition of 1 wt.% Fe but reduced by the addition of 5 wt.%Fe, 1 wt.% Sb, 5 wt.% Sb, 1 wt.% As, 5 wt.%As and 1.8 wt.% P. The performance of Au/MnO_x is improved significantly by the addition of 1 at.% Ce but reduced by the addition of 1 at.% Co. For the catalysts and conditions examined, the Au/MnO_x catalysts are superior to the Pt/SnO_x/SiO₂ catalysts with respect to both activity and decay characteristics.     

Ni／Al2O3催化剂上CH4／CO2重整的脉冲反应研究

报道了用脉冲反应研究Ｎｉ／Ａｌ２Ｏ３催化剂上ＣＨ４／ＣＯ２重整反应的结果。脉冲反应显示，在还原的Ｎｉ／Ａｌ２Ｏ３催化剂上，ＣＨ４在６７３Ｋ就开始发生分解，并有Ｃ２Ｈ６、Ｃ２Ｈ４生成，１０２３Ｋ下，ＣＨ４几乎完全分解，单纯的ＣＯ２则很难在还原的催化剂上发生反应，在９７３Ｋ以上的高温下才会有少量Ｃ胜成ＣＯ．ＣＨＣＯ２的脉冲反应表明，当ＣＨ４在较低温度下开始分解时，ＣＯ２也会发生分解，并生成ＣＯ。脉冲反     

CeO2担载Cu纳米粒子电催化CO2还原产乙烯：CeO2不同暴露晶面对催化性能的影响

Fossil fuels are expected to be the major source of energy for the next few decades. However, combustion of nonrenewable resources leads to the release of large quantities of CO₂, the primary greenhouse gas. Notably, the concentration of CO₂ in the atmosphere is increasing annually at an astounding rate. Electrochemical CO₂ reduction (ECR) to value-added fuels and chemicals using electricity from intermittent renewable energy sources is a carbon-neutral method to alleviate anthropogenic CO₂ emissions. Despite the steady progress in the selective generation of C₁ products (CO and formic acid), the production of multi-carbon species still suffers from low selectivity and efficiency. As an ECR product, ethylene (C₂H₄) has a higher energy density than do C₁ species and is an important industrial feedstock in high demand. However, the conversion of CO₂ to C₂H₄ is plagued by low productivity and large overpotential, in addition to the severe competing hydrogen evolution reaction (HER) during the ECR. To address these issues, the design and development of advanced electrocatalysts are critical. Here, we demonstrate fine-tuning of ECR to C₂H₄ by taking advantage of the prominent interaction of Cu with shape-controlled CeO₂ nanocrystals, that is, cubes, rods, and octahedra predominantly covered with (100), (110), and (111) surfaces, respectively. We found that the selectivity and activity of the ECR depended strongly on the exposed crystal facets of CeO₂. The overall ECR Faradaic efficiency (FE) over Cu/CeO₂(110) (FE ≈ 56.7%) surpassed that of both Cu/CeO₂(100) (FE ≈ 51.5%) and Cu/CeO₂(111) (FE ≈ 48.4%) in 0.1 mol·L^-1 KHCO₃ solutions with an H-type cell. This was in stark contrast to the exclusive occurrence of the HER over pure carbon paper, CeO₂(100), CeO₂(110), and CeO₂(111). In particular, the FE toward C₂H₄ formation and the partial current density increased in the sequence Cu/CeO₂(111) < Cu/CeO₂(100) < Cu/CeO₂(110) within applied bias potentials from -1.00 to -1.15 V (vs. the reversible hydrogen electrode), reaching 39.1% over Cu/CeO₂(110) at a mild overpotential (1.13 V). The corresponding values for Cu/CeO₂(100) and Cu/CeO₂(111) were FE_C2H4 ≈ 31.8% and FE_C2H4 ≈ 29.6%, respectively. The C₂H₄ selectivity was comparable to that of many reported Cu-based electrocatalysts at similar overpotentials. Furthermore, the FE for C₂H₄ remained stable even after 6 h of continuous electrolysis. The superior ECR activity of Cu/CeO₂(110) to yield C₂H₄ was attributed to the metastable (110) surface, which not only promoted the effective adsorption of CO₂ but also remarkably stabilized Cu⁺, thereby boosting the ECR to produce C₂H₄. This work offers an alternative strategy to enhance the ECR efficiency by crystal facet engineering.