Li2、LiH的激发态和Li2H的基态结构与势能函数

使用“对称性匹配簇-组态相互作用”方法,对Li2分子三重态的第一激发态、LiH分子的基态、单重态的第一和第二激发态的几何构型与谐振频率进行了优化计算.利用“群操作求和”方法分别对这4个态进行单点能扫描计算,并拟合出了相应各态的Murrell-Sorbie势能函数.使用多种方法对Li2H分子的基态结构进行优化,并用优选出的密度泛函(B3P86)方法对该分子进行了进一步的频率计算.结果发现Li2H分子的基态稳态结构为C2v构型,在此基础上用多体项展式理论导出了它的解析势能函数,其等值势能图准确再现了Li2H分子的结构特征和离解能.首次报导了该分子对称伸缩振动等值势能图中存在的两个对称鞍点,对应于反应LiH Li→Li2H,活化能大约为18.7×4.184 KJ/mol.     

Adhesion studies of latex film surfaces on the meso- and nanoscale

In this paper the effects of surface roughness and annealing temperature (T) of latex coating films on adhesion are discussed for the different stages of the film formation process. The surface free energy of latex films was assessed in terms of practical work of adhesion (W) (or adherence) using a custom-built adhesion-testing device (ATD), atomic force microscopy (AFM), and contact angle measurements. For preannealed latex films surface roughness averages (R_a) were determined from AFM height images and were related to the values of W obtained from ATD measurements at room temperature. The results obtained using these tests exhibiting surface behavior on different length scales indicate a dependence of the measured adhesion on surface roughness and temperature, as well as on the length scale of the measurements.First preannealed samples were studied, which were obtained by heat treatment above the respective glass transition temperatures (T_g). Increasing the temperature of preannealing resulted in a decrease of the adherence observed in ATD experiments at room temperature. However, on the nanoscale, using AFM, no significant variation of the adherence was observed. This observation can be explained by roughness arguments. Preannealing decreases roughness which results in lower adherence values measured by ATD while for essentially single asperity AFM experiments roughness has an insignificant effect. Specimens were also annealed over a constant period of time (90 min) at different temperatures. At the end of the heat treatment, adhesion was measured at the treatment temperature by ATD. The amplified effect of temperature observed in this case on adherence is attributed to the combination of roughness decrease and increasing test temperature. In a third set of experiments completely annealed samples were studied by ATD as well as by AFM as a function of temperature. With increasing T values ATD showed a decrease in adherence, which is attributed to a decreasing surface free energy of the annealed films at elevated T values. AFM, on the other hand, showed an opposite trend which is assigned to increasing penetration of the tip into the tip/wetting polymer samples versus increasing temperature. Finally, annealing isotherms as a function of time were investigated by ATD in situ at different temperatures. This last set of experiments allowed us to optimize annealing time and temperature to achieve complete curing.     

EACVD中用氢原子谱线测定电子平均能量

采用蒙特卡罗方法，对EACVD中氢原子的发射过程进行了模拟。给出了由氢原子谱线测定电子平均能量的方法，结果对EACVD生长金刚石薄膜过程中实时监测电子平均能量，进而可以有效地控制工艺条件，生长出高质量的金刚石薄膜具有重要意义。     

Homogeneous immunoassays

Applied Biochemistry and Biotechnology -     

Impact of 100 MeV Au on the surface of relaxed Si0.5Ge0.5 alloy films studied by atomic force microscopy

We demonstrate a gradual surface modification process of relaxed Si_0.5Ge_0.5 alloy films by 100 MeV Au beam with fluence varying between 5 × 10¹⁰ and 1 × 10¹² ions/cm² at 80 K by means of atomic force microscopy (AFM). Presence of Ge quantum dots (QDs) was found in the virgin sample. The disappearance of the QDs were noticed when the samples were irradiated with a fluence of 5 × 10¹⁰ ions/cm². Craters were found developing at a fluence of 1 × 10¹¹ ions/cm². Apart from the evolution of the craters, blisters were also detected at a fluence of 1 × 10¹² ions/cm². Variation of the average root mean square value of the surface roughness as a function of fluence was examined.     

The epitaxial sexiphenyl (0 0 1) monolayer on TiO2(1 1 0): A grazing incidence X-ray diffraction study

A para-sexiphenyl monolayer of near up-right standing molecules (nominal thickness of 30 Å) is investigated in-situ by X-ray diffraction using synchrotron radiation and ex-situ by atomic force microscopy. A terrace like morphology is observed, the step height between the terraces is approximately one molecular length. The monolayer terraces, larger than 20 μm in size, are extended along the [0 0 1] direction of the TiO₂(1 1 0) substrate i.e. along the Ti-O rows of the reconstructed substrate surface. The structure of the monolayer and its epitaxial relationship to the substrate is determined by grazing incidence X-ray diffraction. Extremely sharp diffraction peaks reveal high crystalline order within the monolayer, which was found to have the bulk structure of sexiphenyl. The monolayer terraces are epitaxially oriented with the (0 0 1) plane parallel to the substrate surface (out-of-plane order). Four epitaxial relationships are observed. This in-plane alignment is determined by the arrangement of the terminal phenyl rings of the sexiphenyl molecules parallel to the oxygen rows of the substrate.     

Study of nitrogen ion implantation and diffusion phenomena on thin chromium layers followed by the atomic force microscopy and secondary ion mass spectroscopy techniques characterization

This research investigates the effect of ion implantation dosage level and further thermal treatment on the physical characteristics of chromium coatings on Si(1 1 1) substrates. Chromium films had been exposed to nitrogen ion fluencies of 1 × 10¹⁷, 3 × 10¹⁷, 6 × 10¹⁷ and 10 × 10¹⁷ N⁺ cm⁻² with a 15 keV energy level. Obtained samples had been heat treated at 450 °C at a pressure of 2 × 10⁻² Torr in an argon atmosphere for 30 h. Atomic force microscopy (AFM) images showed significant increase in surface roughness as a result of nitrogen ion fluence increase. Secondary ion mass spectroscopy (SIMS) studies revealed a clear increased accumulation of Cr₂N phase near the surface as a result of higher N⁺ fluence. XRD patterns showed preferred growth of [0 0 2] and [1 1 1] planes of Cr₂N phase as a result of higher ion implantation fluence. These results had been explained based on the nucleation-growth of Cr₂N phase and nitrogen atoms diffusion history during the thermal treatment process.     

The effect of ITO films thickness on the properties of flexible organic light emitting diode

Indium tin oxide (ITO) thin films were deposited on cyclic olefin copolymer substrate at room temperature by an inverse target sputtering system. The crystal structure and the surface morphology of the deposited ITO films were examined by X-ray diffraction and atomic force microscopy, separately. The electrical properties of the conductive films were explored by four-point probing. Visible spectrometer was used to measure the optical properties of ITO-coated films. The performance of the flexible organic light emitting diode device with different thickness anode was investigated in this study.     

Electronic spectra of cationic forms of meso-tetrapropylporphin in a nanoporous silicate gel matrix

We have studied the fluorescence and fluorescence excitation spectra at 300 K, 77 K, and 4.2 K for silicate gel matrices colored with meso-tetrapropylporphin by impregnation of the matrix with a solution of the pigment. Comparison of the data obtained with the absorption spectra in acidified solutions and analysis of the low-temperature fine-structure vibronic spectra, and also taking into account data obtained earlier for octaethylporphin in a xerogel showed formation of two cationic forms of meso-tetrapropylporphin in the gel matrix: the short-wavelength form has a dicationic structure, while the long-wavelength form has a monocationic structure. We have traced out the correlations of the vibrational structure in the spectra of the dicationic form with data for the porphin dication, and we have drawn a number of conclusions concerning the normal vibrational modes that are active in the vibronic fluorescence and absorption spectra of the studied cationic forms. Using the AM1 semiempirical quantum chemical method, we optimized the geometry of the mesotetrapropylporphin dication: the most stable of the possible conformers is the dication structure with saddleshaped macrocycle nonplanarity. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 4, pp. 453–461, July–August, 2006.     

Time-resolved fluorescence spectra of a bichromophoric molecule, 2-methyl-1,2,3,4-tetrahydroisoquinoline in various media

Time-resolved fluorescence spectra of a title molecule (with benzene and aliphatic amine parts) in various media, after excitation by several lasers were observed to complement the previous work by conventional spectroscopy [N. Kanamaru, J. Tanaka, J. Phys. Chem. 95 (1991) 6441]. Though complex with many new features, the results were roughly consistent with the previous ones. The significant conclusions are as follows: (1) The emission to be ascribed to the amine (N) part, with more than one component (of nN and aN types) is observed not only for the acetonitrile solution (as previously reported) but also for all the other media. (2) Contrary to the case of a nonpolar hexane solution, both of N fluorescences in the other media reveal unusually long-lived decay components. This can be interpreted by assuming the so-called charge-transfer-to-solvent (CTTS) state that is nonfluorescent and lies just below the fluorescent state. (3) This observation in the protic media can also be taken as another evidence of the peculiar hydrogen bonding between this amine and the protic solvent molecules [N. Kanamaru, J. Tanaka, J. Phys. Chem. 95 (1991) 6441]. (4) Thus, the unexpectedly large quantum yields of N fluorescences in the polar media are now interpreted as arising due to the slow S₁^N→(CTTS)→S₀ internal conversions.