Linear wave dispersion relation of a magnetized relativistic rectilinear electron beam-dielectric system

A general dispersion relation is derived for a relativistic rectilinear electron beam of arbitrary momentum distributions interacting with a dielectric in a guide magnetic field, on the basis of Maxwell equations and the relativistic Vlasov equation. The instability occurs when the beam velocity exceeds the wave phase velocity in the medium. The linear wave dispersion relation, growth rate, spatial growth rate are studied analytically for delta and Lorentzian distributions of beam momentums in detail. The results are of importance for a new kind of high-power microwave generation or amplification devices based on anomalous Doppler effect.     

Dispersion Mechanism of Superfine SiC Particles in the Different Condition Liquid

SiC@A1(OH)₃-Y(OH)₃ core-shell composite particles are synthesized by co-precipitation method for strengthening the antioxidation of SiC at high temperature. To reach better A1(OH)₃-Y(OH)₃ composite shell and higher coating ratio on the SiC particles surfaces, SiC particles must be adequately dispersed in the SiC suspension during the coating process. The dispersion mechanism of SiC particles is investigated by the sedimentation method. Through test and analysis, the optimum conditions of the dispersion of SiC particles in the SiC suspension are sedimentating for 10 minutes, ultrasonic dispersion for 10 minutes, the lower SiC concentration, pH = 9, the dispersant content for the 2% volume of SiC suspension and using the polyelectrolyte dispersant, respectively.     

Noncovalent Functionalization of Multiwalled Carbon Nanotubes by Anionic Polymer Poly(Sodium 4‐Styrenesulfonate) in Water

We have found that polymer poly (sodium 4‐styrenesulfonate) (PSS) is a facile and effective polymer to assist in the dispersion of MWCNTs in aqueous solutions. With the increase of the concentration of PSS solutions, the dispersibility of MWCNTs in PSS solution increases. Cast films of MWCNTs/PSS (2 wt.%) on GC electrode show a typical redox couple at scan rate of 1 V/s in phosphate buffer solution, indicating good electrical conductivity.     

THE ADSORPTION OF AN ANIONIC SURFACTANT AT THE OIL WATER INTERFACE DURING EMULSION HOMOGENIZATION

Adsorption of sodium dodecylbenzene sulfonate (NaDBS) on the surfaces of dispersed oil globules during homogenization of paraffin oil in water emulsions has been studied. NaDBS concentration was changed over a wide interval comprising critical micelle concentration. For the emulsions homogenized for different time intervals the total quantity and the percentage of NaDBS adsorbed, the amount and number of NaDBS molecules adsorbed per unit inter-facial area, as well as the specific surface area of dispersed phase and the area per emulsifier molecule have been determined.

The amount adsorbed and density of the emulsifier layer, I.e., the area per NaDBS molecule adsorbed on the oil globule surfaces, depend not only on Initial NaDBS concentration but also, on the homogenization time and the homogenization action. This makes a difference between the adsorption behaviour under the conditions of emulsion formation and its subsequent homogenization, and the adsorption behaviour of the emulsifier at a plane quiescent Interface.     

Effect of HAP on Stability and Plugging Property of LPFR Dispersion

To improve the stability and plugging property of low-solubility phenol formaldehyde resin (LPFR) in the injection water from Daqing Oilfield, hydrophobically associating polymers (HAP) as a stabilizing agent were used. The size and zeta potential of LPFR, LPFR/HAP molecule aggregates, and turbidity and plugging properties of LPFR dispersions were measured in deionized water, simulation water, and injection water, respectively. The results show that the hydrophobic grouping on the HAP molecule has a similar molecular structure as LPFR, and HAP and LPFR can form complex molecule aggregates in the injection water. The zeta potential of LPFR/HAP molecule aggregates is larger than that of LPFR molecule aggregates. Therefore, the repulsive force operating between LPFR/HAP complex molecule aggregates is increased. HAP enhances the stability of LPFR in the injection water and plugging property of LPFR dispersion in porous medium.     

Counterflow isotachophoresis in a monolithic column

This study describes stationary counterflow isotachophoresis (ITP) in a poly(acrylamide‐co‐N,N′‐methylenebisacrylamide) monolithic column as a means for improving ITP processing capacity and reducing dispersion. The flow profile in the monolith was predicted using COMSOL's Brinkman Equation application mode, which revealed that the flow profile was mainly determined by monolith permeability. As monolith permeability decreases, the flow profile changes from a parabolic shape to a plug shape. An experimental monolithic column was prepared in a fused‐silica capillary using an ultraviolet‐initiated polymerization method. A monolithic column made from 8% (wt.) monomer was chosen for the stationary counterflow ITP experiments. Counterflow ITP in the monolithic column showed undistorted analyte zones with significantly reduced dispersion compared to the severe dispersion observed in an open capillary. Particularly, for r‐phycoerythrin focused by counterflow ITP, its zone width in the monolithic column was only one‐third that observed in an open capillary. These experiments demonstrate that stationary counterflow ITP in monoliths can be a robust and practical electrofocusing method.     

影响高浓度氧化石墨烯分散液流变行为的重要因素及群体平衡动力学分析

氧化石墨烯(GO)片的基面和边缘上存在大量的含氧官能团,能很好地分散在水中,因而具有很好的加工性和广阔的应用前景。在较高浓度范围下,GO水分散液中存在着强烈的竞争性相互作用,从而对流变行为产生较大影响。在本文中,通过稳态、动态等流变实验以及理论分析,研究了pH值、温度和不同的有机溶剂对GO分散液流变行为的影响。结果表明,降低pH值、适当增加温度以及加入吡啶均可促进GO水分散液从粘弹性液体到凝胶态的转变。利用DLVO (Deryagin-Landau-Verwey-Overbeek)理论,探讨了GO片之间的范德华作用力以及双电层排斥作用的相互关系,及其对流变性能的影响。通过群体平衡模型(PBE)分析了GO分散液的屈服应力与体积分数的正相关关系。同时,通过蠕变和松弛实验发现,高浓度的GO分散液中结构变化及流变行为在很多方面与高聚物相似,利用Poyting-Thomson模型能较好地拟合其粘弹性行为。上述研究结果为深入研究复杂的GO分散体系提供理论支撑和实验依据。     

Dispersion measurements using time-of-flight remote detection MRI

Remote detection nuclear magnetic resonance and magnetic resonance imaging can be used to study fluid flow and dispersion in a porous medium from a purely Eulerian point of view (i.e., in a laboratory frame of reference). Information about fluid displacement is obtained on a macroscopic scale in a long-time regime, while local velocity distributions are averaged out. It is shown how these experiments can be described using the common flow propagator formalism and how experimental data can be analyzed to obtain effective porosity, flow velocity inside the porous medium, fluid dispersion and flow tracing of fluid.     

水性颜料体系无树脂色浆的制备与应用

中性墨水属于热力学上不稳定的颜料悬浮体系,选择低黏度、高稳定性的色浆是保证墨水体系分散稳定性的重要手段之一。基于此,以颜料炭黑和酞菁蓝为着色剂,配合超分散剂(EK43)与协同增效剂(BM10),制备了两款适用于中性墨水体系的无树脂色浆。首次从色浆粒径与体系分散稳定性角度出发,确定了EK43、BM10用量以及最佳研磨时间,并对其理化性能、稳定性与书写性能进行分析测试。结果表明:在黑色浆中添加质量分数10.0%的EK43、2.5%的BM10,研磨时间为90 min;在蓝色浆中添加质量分数8.0%的EK43、2.0%的BM10,研磨时间为120 min时,两种色浆的粒径与分散稳定性均达到最佳。所制备的无树脂色浆颜料固含量高、黏度较低、储存稳定性好、着色力强,以其调配的中性墨水书写性能良好,且具有较好的离心稳定性和耐热稳定性。