ICP-AES测定陶瓷器皿中微量溶出铅、镉的研究

用4%乙酸溶液萃取分离日用瓷表面微量溶出元素Pb和Cd后,采用电感耦合等离子体原子发射光谱(ICP-AES)法进行了分析,对影响其测量的各种因素进行了较详细的研究,确定了实验的最佳测定条件。结果表明,方法的检出限为0.023(Pb)和0.006μg/L(Cd),回收率为98.0%~104.0%,RSD小于3.5%。该法准确、快速、简便,应用于日用瓷中的微量溶出铅、镉的测定,结果满意。     

Application of ionic liquid modified carbon ceramic electrode for the sensitive voltammetric detection of rutin

An ionic liquid (IL) modified carbon ceramic electrode (CCE) was designed and further used for the voltammetric detection of rutin in this paper. IL-CCE was prepared by mixing graphite powder with 1-butyl-3-methylimidazolium tetrafluoroborate (EMIMBF₄) doped silicate sol-gel matrix together and further characterized by different methods. Then electrochemical behaviors of rutin on the IL-CCE were investigated by different electrochemical methods such as cyclic voltammetry and differential pulse voltammetry (DPV). Due to the presence of IL in the CCE, an enhanced electrochemical response of rutin appeared with a pair of well-defined redox peaks in pH 2.5 phosphate buffer solution (PBS). The electrochemical behaviors of rutin on the IL-CCE were carefully investigated. Under the selected conditions the oxidation peak currents exhibited good linear relationship with the rutin concentration in the range from 0.3 to 100.0 μmol/L with the detection limit as 0.09 μmol/L (3σ). The proposed method was further applied to the rutin tablets sample detection with satisfactory results.     

Synthesis and textural evolution of alumina particles with mesoporous structures

Alumina particles with mesostructures were synthesized through a chemical precipitation method by using different inorganic aluminum salts followed by a heterogeneous azeotropic distillation and calcination process. The obtained mesoporous γ-alumina particles were systematically characterized by the X-ray diffraction, transmission electron microscopy and nitrogen adsorption-desorption measurement. Effects of the aluminum salt counter anion, pH value and the azeotropic distillation process on the structural or textural evolution of alumina particles were investigated. It is found that Cl⁻ in the reaction solution can restrain the textural evolution of the resultant precipitates into two-dimensional crystallized pseudoboehmite lamellae during the heterogeneous azeotropic distillation, and then transformed into γ-Al₂O₃ particles with mesostructures after further calcination at 1173 K, whereas coexisting SO₄²⁻ can promote above morphology evolution and then transformed into γ-Al₂O₃ nanofibers after calcination at 1173 K. Moreover nearly all materials retain relatively high specific surface areas larger than 100 m² g⁻¹ even after calcinations at 1173 K.     

Cross-relaxation and spectral broadening of gain for Nd/Cr:YAG ceramic lasers with white-light pump source under high-temperature operation

Spectral broadening of the fluorescence of a Nd/Cr:YAG ceramic at the 1064 nm lasing wavelength was observed, and the amplification properties at a high temperature were investigated by considering cross-relaxation. These ceramics are promising for use as a solid-laser material pumped with solar or lamp light. It has been found that whenever the temperature of a laser medium is high and a spectral shift occurs, a high small-signal gain remains owing to the broad spectral band and the cross-relaxation. This optical property is remarkably different from that of a Nd:YAG laser. For a conventional Nd:YAG laser, the bandwidth at 1064 nm is 0.45 nm, and a reduction in small-signal gain occurs at a temperature of 373 K because the spectral peak shift is 0.005 nm/K. However, for the Nd/Cr:YAG ceramic, the bandwidths are 1.2 and 1.9 nm in the case of 0.1% Cr ion doping and 3% Cr ion doping, respectively, owing to the existence of excited Cr ions and the shortening of the effective Nd ion coherence time. It is prospected that the laser medium can be used at a high temperature of 600 K.     

聚能射流对氧化铝陶瓷靶的侵彻特性研究

 建立了考虑损伤的求解靶板阻力的理论模型,以此来评估陶瓷靶板的抗侵彻能力;数值模拟了长杆弹侵彻氧化铝陶瓷靶的破坏特性,结合实验结果确定了氧化铝陶瓷本构模型中的材料参数。建立了聚能射流侵彻氧化铝陶瓷靶的计算模型,对射流的形成机理及氧化铝陶瓷靶的抗侵彻性能进行研究,讨论了药型罩的几何尺寸对所形成的射流速度及侵彻深度的影响。结果表明：药型罩的锥角和壁厚增大,射流速度减小,壁厚对射流速度梯度的影响较大;同样,药型罩的锥角对侵彻深度也有较大的影响。     

大功率固态脉冲形成线研究进展

 固态化是脉冲功率技术发展的新趋势。综述了中国工程物理研究院流体物理研究所在大功率固态脉冲形成线方面的研究进展,给出了基于铁电陶瓷及玻璃-陶瓷复合材料的固态脉冲形成线绝缘强度、脉冲放电特性等方面的最新结果。对基于铁电陶瓷及玻璃-陶瓷复合材料的固态脉冲形成线的脉冲特性进行了分析和探索。     

Structure and optical features of silicon carbide nanocrystals confined in alumina matrices

Thin films based on silicon carbide and alumina were synthesized by means of rf-sputtering using a co-deposition process. Several nanostructures were created which consist of thin films (∼200 nm thick) with homogeneous distribution of SiC nanocrystals (∼5 nm mean diameter) in the host alumina matrices. Characterization methods including X-ray photoelectrons spectroscopy (XPS), UV-vis absorption and photoluminescence (PL) were used to identify the involved structures, compositions and optical features of these nanostructures. Thus, XPS investigations were relevant to point out the involved chemical bonding in the core SiC nanocrystals and in the host alumina environments. Additionally, mixed bonding such as Si-O-C was also shown and seems to correlate with the SiC-alumina interfaces. Optical properties of the nanostructures films such as UV-vis absorption and photoluminescence (PL) were measured in representative samples and compared to simulated PL responses obtained by a theoretical model.     

Laser carbonitriding of alumina surface

Laser carbonitriding of alumina surfaces is examined. Temperature and stress fields developed during the laser heating of the substrate surface are predicted using the finite element method in line with the experimental conditions. The formation of Al(C, N) and AlN compounds in the surface region of irradiated workpiece is examined using X-ray Photoelectron Spectroscopy (XPS) and X-ray Diffraction (XRD). The microstructural and morphological changes in the laser irradiated region are examined using Scanning Electron Microscope (SEM). The microhardness of the resulting surface is measured and compared with the base material hardness. It is found that high temperature gradient is developed in the irradiated region, which in turn, results in high residual stress levels in this region. XPS and XRD data reveal the presence of Al (C, N) and AlN compounds in the surface region. The microhardness in the surface region of the laser treated workpiece increases significantly.     

Development of long-life-cycle tablet ceramic adsorbent for geosmin removal from water solution

In this study, the tablet ceramic adsorbent (TCA), a silica/iron(III) oxide composite material, has been developed for geosmin (GSM) removal from the water solution. The physicochemical characteristics of TCA were examined with XRD, SEM, EDX and BET analyses. The sorption characteristics of GSM on TCA were investigated in a batch system. Attempts have been made to understand the adsorption kinetics, the effect of initial GSM concentration, solution pH, and reaction time.The batch experiments equilibrium data were well fitted to the Lagergren kinetic equation, which indicate the first-order nature adsorption. Over 82% of the GSM was removed by the TCA within 600 min at an initial concentration of 200 ng/L with 20 g/L of TCA dose. The batch and regeneration study indicated that the TCA is a cost-effective GSM adsorbent with sufficient mechanical strength to retain its physical integrity after long-time adsorption, and high regeneration performance for long-life-cycle application. Almost no second contamination (toxic sludge or leached iron) was observed after adsorption, and the gas resultant of thermal regeneration is harmless to atmospheric environment.     

Atmospheric reactive plasma sprayed Fe-Al2O3-FeAl2O4 composite coating and its property evaluation

In the present study, Fe-Al₂O₃-FeAl₂O₄ composite coatings were successfully deposited by reactive plasma sprayed Al/Fe₂O₃ agglomerated powder. Phase composition and microstructure of the coatings were determined by XRD and SEM. The results indicated that the composite coatings were principally composed of three different phases, i.e. FeAl₂O₄ phase as main framework, dispersed ball-like Fe-rich phase, and small splats of Al₂O₃ phase, and it was thought that the in situ synthesized metal phase was helpful to toughen the coating matrix. According to the results of the indentation and frictional wear tests, the composite coating exhibited excellent toughness and anti-friction properties in comparison with conventional Al₂O₃ monophase coating, though its microhardness value was a little lower than that of Al₂O₃ coating. The formation mechanism and the toughening mechanism of the composite coating were clarified in detail.