Three-component,one-pot synthesis of 3,4-dihydropyrimidin-2-(1<Emphasis Type="Italic">H</Emphasis>)-ones catalyzed by bromodimethylsulfonium bromide

An efficient synthesis of 3,4-dihydropyrimidin-2-(1H)-one derivatives by one-pot three-component condensation reaction between an alkyl or aryl aldehyde, a 1,3-dicarbonyl compound, and urea or thiourea in the presence of catalytic amount of bromodimethylsulfonium bromide has been developed. The condensation product was obtained in excellent yields in refluxing ethanol and easily separated from the reaction mixture and purified.     

制备参数对高比表面积介孔催化剂La-Co-Zr-O结构与性能的影响

采用双表面活性剂模板(十六烷基三甲基溴化铵和聚乙二醇辛基苯基醚的混合物)分解法制备了不同原子比(n_La+n_Co)/(n_La+n_Co+n_Zr)和不同温度焙烧的系列介孔混合氧化物催化剂La-Co-Zr-O。运用XRD、N₂吸附/脱附、XPS和H₂-TPR等技术对催化剂进行了表征，并以CO和C₃H₈氧化为模型反应，考察了组分配比和焙烧温度等参数对催化剂催化性能的影响。比表面积和孔径测试结果表明，样品具有很高的比表面积(108～266 m²·g^-1)和分布集中的孔径(3.4～3.9 nm)，Zr含量较高的样品比表面积较大。XRD结果表明，样品中的活性组分钴物种主要以Co₃O₄形式存在；XPS和H₂-TPR结果表明，样品中可还原的晶格氧的数量、活动度以及表面钴原子浓度均与催化剂对CO和C₃H₈的氧化性能密切相关。原子比为0.5的样品中，较多的晶格氧易于在相对低温下还原；而原子比为0.7的样品表面钴原子浓度较高，这使得两样品均表现出较高的催化活性。经650 ℃焙烧的样品仍保持较高的比表面积(108 m²·g^-1)和分布集中的介孔孔径(最可几孔径约3.8 nm)，且催化活性下降幅度也很小，表明该系列介孔催化剂具有优良的抗烧结能力和介孔热稳定性。     

Alkane oxygenation with H2O2 catalysed by FeCl3 and 2,2′-bipyridine

The H₂O₂-FeCl₃-bipy system in acetonitrile efficiently oxidises alkanes predominantly to alkyl hydroperoxides. Turnover numbers attain 400 after 1 h at 60 °C. It has been assumed that bipy facilitates proton abstraction from a H₂O₂ molecule coordinated to the iron ion (these reactions are stages in the catalytic cycle generating hydroxyl radicals from the hydrogen peroxide). Hydroxyl radicals then attack alkane molecules finally yielding the alkyl hydroperoxide.     

烷基和烷基苯磺酸钠系列的反相高效液相色谱法

用移动相中含有磷酸二氢钠的反相高效液相色谱法分析了烷基磺酸钠和烷基苯磺酸钠。对前者用电导检测器直接进行检测(无抑制柱),后者用紫外检测器检测。对几种商品十二烷基苯磺酸钠的组分和微乳液中十二烷基磺酸钠的含量进行了测定。得到了满意的结果。     

Study of modified silicas by inverse gas chromatography. Influence of chain length on the conformation of n-alcohols grafted on a pyrogenic silica

Summary A fumed silica surface was systematically modified by the grafting of n-alkyl chains with increasing carbon numbers. The samples were characterized by the dispersive component of the surface energy, their specific interaction potential and enthalpies of adsorption of polar, in particular, alcohol probes. It is shown that the variation of the surface properties and adsorption capacities depend on the chain length of the graft. For instance, minimum values are recorded when the surface coverage by methylene groups corresponds either to one or two CH₂ surface layers. This behaviour is related to the mobility of the grafted alkyl chains, mobility which was examined by solid state NMR.     

M~＋＋BrCN─→MCN~＋＋Br气相反应的从头算研究

Ｍ~＋＋ＢｒＣＮ─→ＭＣＮ~＋＋Ｂｒ气相反应的从头算研究朱荣顺，戴树珊（云南大学化学系，昆明，６５００９１）关键词气相反应，过渡金属阳离子，溴化氰，从头算，相对论赝势对过渡金属离子与一些小分子的气相反应已有大量的实验和理论研究［１～５］，ＭｉｃｈｅｌＳ...     

镉—溴化物—罗丹明B高灵敏显色反应的研究：离心光度法测定镉

本研究了一个高灵敏的测定镉的方法，离心光度法，该体系络合物λｍａｘ＝５６０ｎｍ，表观摩尔吸系数ε５６０＝５．０６×１０＾８Ｌ．ｍｏｌ＾－１．ｃｍ＾－１，Ｃｄ＾２＋浓度０．１０×１０＾－２－１．０×１０＾－２μｇ／１０ｍＬ呈线性关系，本法已用于血清和水中痕量镉的测定，探讨了高灵敏的显色反应机理。     

伯溴代烷的微波快速合成法

198 6年Ｒ .Ｊ.Ｇｉｇｎｅｒｅ[1 ] 和Ｒ .Ｇｅｄｙｅ[2 ] 首次报道将微波用于有机合成反应以来 ,大量实验事实证明[3] 微波不仅能极大地提高某些化学反应速率 ,而且能使一些在常规加热条件下几乎不能进行的反应得以完成、获得满意的收率。用伯醇在溴化氢溶液中微波条件下发生反应制备了伯溴代烷。1　实验部分ＷｈｉｒｌｐｏｏｌＴ1 2 0Ｘ微波炉 (四川大学无线电系改装 ,可连续发射微波 ,功率连续可调 )、ＷＺＳ -Ｉ阿贝折光仪 (未校正 )。工业溴化氢 (Ｃ =40 % ,ｄ =1 38) ,其余试剂均为ＣＰ级。合成通法　将适量的醇、一定量的浓硫酸和过…     

Interactions of Some Amino Acids with Aqueous Tetraethylammonium Bromide at 298.15 K: A Volumetric Approach

The apparent molar volumes, V_,2, of glycine, L-alanine, DL--amino-n-butyric acid, L-valine, and L-leucine have been determined in aqueous 0.25, 0.75, 1.0, and 1.5 mol-dm^–3 tetraethylammonium bromide (TEAB) solutions by density measurements at 298.15 K. These data have been used to calculate the infinite dilution apparent molar volumes, V_2,m, for the amino acids in aqueous tetraethylammonium bromide and the standard partial molar volumes of transfer (_tr V_2,m) of the amino acids from water to the aqueous salt solutions. The linear correlation of V_2,m for a homologous series of amino acids has been utilized to calculate the contribution of the charged end groups (NH₃⁺, COO^–), CH₂ group, and other alkyl chains of the amino acids to V_2,m. The results of the standard partial molar volumes of transfer from water to aqueous tetraethylammonium bromide have been interpreted in terms of ion–ion, ion–polar, and hydrophobic–hydrophobic group interactions. The volume of transfer data suggest that ion–ion or ion–hydrophilic interactions are predominant in the case of glycine and alanine, and hydrophobic–hydrophobic group interactions are predominant in the case of DL--amino butyric acid, L-valine, and L-leucine.