Self aggregation of binary mixtures of sodium dodecyl sulfate and polyoxyethylene alkyl ethers in aqueous solution

The mixed micelles of sodium dodecyl sulphate (SDS) with Brij35 and Brij 97 were studied separately by fluorescence measurement using pyrene as fluorescent probe. In the range of 0–1.0 mole fraction (X) of added SDS to Brij solutions, the cmc value of the mixed micelles varies from 0.085 to 8 mmol with Brij 35 and 0.04 to 8 mmol with Brij 97. The aggregation number also changes. A measure of the stability of mixed micelles is also presented. The interaction parameter ₁₂ and the chain–chain contribution parameter (B₁) are extracted from the analysis of the results. This parameter B₁ is related to the standard free energy change associated with the introduction of one ionic species into a nonionic micelle coupled with the release of one nonionic species from the micelle. The clouding behaviour of Brij 97 in the presence of SDS was investigated and the associated thermodynamic parameters of clouding were generated and discussed.     

Three-phase extraction study of cyanex 923-n-heptane/H(2)SO(4) system

Phase behavior of the extraction system, Cyanex 923–heptane/H₂SO₄–H₂O has been studied. The third phase appeared at different aqueous H₂SO₄ concentration with varying initial Cyanex 923 concentration and temperature affects its appearance. Almost all of H₂SO₄ and H₂O are extracted into the middle phase. The H₂SO₄ concentration in the third phase increases with the increasing aqueous acid concentration (C_H2SO4,b) while the water content first increases and then reaches a constant value at C_H2SO4,b=11.3 mol l⁻¹. In the region of C_H2SO4,b higher than 5.2 mol l⁻¹, the composition of the middle phase is only related to the equilibrium concentration of H₂SO₄ in the bottom phase. H₂SO₄ and H₂O are transferred into the middle phase mainly by their coordination with Cyanex 923 when C_H2SO4,b is less than 11.3 mol l⁻¹. When C_H2SO4,b is higher than 11.3 mol l⁻¹, excess H₂SO₄ is solubilized into the polar layer of the aggregates. In the region considered, the extracted complex changes from C923 · H₂SO₄ to C923 · H₂SO₄ · H₂O and then to C923 · (H₂SO₄)₂ · H₂O.     

The complexation efficiency

Studies have shown that cyclodextrins form both inclusion and non-inclusion complexes and that several different types of complexes can coexist in aqueous solutions. In addition, both cyclodextrins and cyclodextrin complexes are known to form aggregates and it is thought that these aggregates are able to solubilize drugs through micellar-type mechanism. Thus, stability constants determined from phase-solubility profiles are rarely true stability constants for of some specific drug/cyclodextrin complexes. A more precise method for evaluation of the solubilizing effects of cyclodextrins is to determine their complexation efficiency (CE). CE can be determined by measuring the solubility of a given drug at 2–3 cyclodextrin concentrations in pure water or a medium constituting the pharmaceutical formulation such as parenteral solution or aqueous eye drop formulation. Based on the CE value the drug:cyclodextrin ratio in the complexation medium can be determined as well as the increase in the formulation bulk in a solid dosage form. Determination of CE is a simple method for quick evaluating the solubilizing effects of different cyclodextrins and/or the effects of excipients on the solubilization. Here we report the CE of 43 different drugs with mainly 2-hydroxypropyl-β-cyclodextrin but also with randomly methylated β-cyclodextrin as well as few other cyclodextrins. Calculation of CE, drug:cyclodextrin molar ratio and the increase in the formulation bulk is discussed, as well as the influence of the intrinsic solubility and drug lipophilicity on the CE.     

Aggregation of iron colloids in estuaries: a heterogeneous kinetics study using continuous mixing of river and sea waters

The kinetics of iron colloid aggregation in estuaries have been simulated with a model estuary in which seawater is continuously pumped into a reservoir initially containing river water. Profiles of colloidal Fe concentration versus salinity produced in this apparatus closely resembled field data for actual estuaries. Synthetic Fe colloids prepared by peptising Fe(OH)₃ with humic acid and phosphate showed very similar kinetic behaviour. Aggregation rate was found to be almost independent of velocity shear rate, implying that most aggregations are induced by brownian interparticle collisions. A heterogeneous kinetic model is proposed to explain the kinetic behaviour of Fe colloids during seawater-induced aggregation. This model describes kinetic behaviour in terms of a log-normal distribution of rate constants characterised by a mean value k and a standard deviation γ. Experiments showed that k is linearly related to the rate constant for salinity increase during mixing. This coupling of salinity changes and aggregation rate leads to Fe-salinity profiles that are nearly independent of the rate of salinity change, but which are dependent on γ.     

Multiparticle fractal aggregation

Kinetic fractal aggregation in a particle bath where a fractionf of the sites are initially occupied is studied withd=2 computer simulations. Independent particles diffusing to a fixed cluster produce an aggregate with fractal dimensionD 1.7 up to a correlation length(f). At larger lengthsD2.(f) asf 0. When the particles remain fixed but the cluster undergoes a rigid random walkD appears constant at larger scales but varies withf. D 1.95 at largef andD 1.7 asf 0. In both cases, the aggregate sizeN(t) grows with timet ^(f) . Aggregation on a surface by independently diffusing particles produces shapes reminiscent of electrochemical dendritic growth. The dependence of growth rate and geometry is studied as a function of particle concentration and sticking probability.     

Determination of Aggregation Parameters of Hexadecyltrimethylammonium Bromide from Probe Absorption

The mean aggregation number (n) and the critical micelle concentrations (CMC) of reverse micelles formed by hexadecyltrimethylammonium bromide have been determined by means of an optical absorption probe (acridine orange). The procedure to obtain these quantities from absorption spectrophotometric measurements is described. The CMC and mean aggregation number are in satisfactory agreement with published results obtained from more sophisticated methods.     

Helical structures architecture of l-{2-(4-hydroxy-phenyl)-1-[(pyren-1-ylmethyl)-carbamoxyl]-ethyl}-carbamic acid tert-butyl ester

A new pyrenemethylamine substituted l-Boc-tyrosine derivative was synthesized and characterized. UV-vis, FL, CD, and light scattering experiments proved that the chiral molecules were able to self-assemble for formation of new aggregate structure. The SEM and AFM images indicated that the helical wires could be fabricated by π-π stacking interaction between adjacent pyrene molecules.     

Mesoscopic simulation of the aggregation behavior of fluorinated surfactant in aqueous solution

The aggregation behavior of fluorinated surfactant in aqueous solution was investigated using dissipative particle dynamics (DPD) simulation method. Simulation results show that fluorinated surfactants behave mainly as their hydrocarbon analogues, having similar sequences of phases and aggregate structures, which are capable of building micelle, hexagonal phase and lamellar phase. But fluorinated surfactants also show interesting differences from hydrocarbon analogues, which can easily form hexagonal and lamellar structures with comparative little curvature. They can also form ellipsoid or rod-like micelles even in very low concentrations instead of spheroid ones. The dynamic aggregation behavior of fluorinated surfactants, as well as the comparison with hydrogenated ones, was also investigated.     

Preparation of light-stable micelles with azo dyes from a nonamphiphilic random block copolymer

Light-stable micelles with azo dyes were prepared by micelle formation of a nonamphiphilic diblock copolymer containing azobenzene and UV absorbent at ca. 1 mol% as the unit ratios. The nonamphiphilic block copolymer consists of two different kinds of random copolymer blocks: poly[4-(phenylazophenoxymethyl)styrene-co-vinylphenol] (P(AS-co-VPh)) and poly[4-(2-hydroxybenzophenoxymethyl)styrene-co-styrene] (P(HBS-co-St)). This random block copolymer, P(AS-co-VPh)-b-P(HBS-co-St) formed the micelles in the presence of 1,4-butanediamine (BDA) through hydrogen bond cross-linking between the VPh units via BDA. The micelles had the azobenzene moieties at the cores and the UV absorbents at the coronas. The micelles showed a small color difference in color fading experiments, in comparison with the unimers and with micelles having no UV absorbent at the coronas. It is significant that the diblock copolymer forms the micelles and has the UV absorbents at the coronas to suppress the color fading. Furthermore, the chain length of ,-diamines had no effect on the hydrodynamic radius of the micelles, but affected the aggregation number and the cmc.     

双分子膜上染料的吸附性质及对膜结构的影响

系统地研究了染料甲基橙和达旦黄在含席夫碱基囊泡双分子膜阳离子表面上的吸附和聚集，以及由此产生的对膜聚集结构的影响，染料的吸附和聚集可经电子吸收光谱的因吸附产生的沉淀证实，并且ＭＯ的聚集结构的Ｈ－聚集，ＴＹ的聚集结构为Ｊ－聚集。改变ｐＨ的研究表明ＭＯ在变色ｐＨ值以及因形成阳离子而解聚，ＴＹ在酸性条件下亦因离子化程度减弱和部分质子化而使聚集被削弱，但在碱性条件下其聚集产生更大的红移。温度变化的结果显示