稀土掺杂对锂离子电池正极材料LiMn2O4结构及电性能的影响

利用微波加热技术合成稀土掺杂基锂离子电池正极材料LiMn2-xRExO4(RE=Y，Nd，Gd，Ce)，通过XRD、循环伏安及恒电漉充放电测试研究了稀土掺杂离子对合成正极材料结构及电化学性能的影响。XRD测试结果表明，合适的掺杂量可以起到扩展锂离子脱嵌通道和稳定骨架结构的作用，稀土离子的引入可以部分取代原有的三价锰离子，由于稀土离子的离子半径较三价锰离子大，因此稀土掺杂锰酸锂材料的晶胞参数比未掺杂材料大，在一定程度上扩充了锂离子迁移的三维通道，更有利于锂离子的嵌入与脱嵌；循环伏安及恒电漉充放电测试结果表明稀土掺杂有效提高了LiMn2O4材料的电化学循环可逆性及循环稳定性。     

Samarium diiodide promoted formation of 1,2-diketones and 1-acylamido-2-substituted benzimidazoles from N-acylbenzotriazoles

N-Acylbenzotriazoles, when treated with samarium diiodide in THF, undergo self-coupling reaction to afford 1,2-diketones in good to excellent yields; while when treated with samarium diiodide in CH₃CN, they undergo ring-opening reaction to afford 1-acylamido-2-alkyl (or aryl) benzimidazoles in reasonable to good yields. A plausible mechanism was suggested.     

Structure-Activity Relationship of Insecticidal Steroids. V. 3β-Benzoyloxystigmastan-6-ones

The toxicity of steroid benzoates 4-10 for Colorado beetle (Leptinotarsa decemlineata Say.) larvae was studied by a contact-intestinal method. The most active growth and development regulator for this insect is 3-benzoyloxy-5-hydroxy-⁷-6-ketosteroid 9a.     

Aktivierung von CO2 an Übergangsmetallzentren: Zum Ablauf der CO2-Reduktion an Nickel(0)-Fragmenten

Activation of CO₂ at Transition Metal Centres: The Route of the CO₂ Reduction at Nikel(0) Moieties A competing reaction in the catalytic cyclooligomerization of hex-3-yne and CO₂ at the (TMED)Ni(0)-fragment (TMED = N,N,N′,N′-tetramethylethylendiamine) is the formation of carbon monoxide and (TMED)Ni(CO₃). So it is possible to explain the generation of II (TMED)Ni(diethylmalicacidanhydride) and III (a nickel trimer with two (TMED)Ni(CO₃) units). Both complexes are characterized by X-ray analysis. The reduction of CO₂ to CO most likely proceeds via an intermediate in which two molecules of carbon dioxide are coupled head-to-tail to form a metallacycle. An ab initio scf geometry optimization supports the existence of such an intermediate.     

2,4-二硝基苯丙氨酸钠盐·2,4-二硝基苯丙氨酸的合成、分子结构和二次谐波效应

合成了一种新的有非线性光学性能的标题化合物晶体NaAP·HAP,晶体属正交晶系,空间群为P2_12_12_1,a=25.773(6),b=12.377(3),c=7.2037(6)(?),z=4,D_c=1.54g·cm~(-3)。晶体结构由HAP分子(2,4-二硝基苯丙氨酸)、AP~-离子和Na~+离子组成。Na~+离子由周围的六个氧原子形成扭曲的八面体配位。这些NaO_6八面体通过共点形成无限链状结构。可用晶体结构的空间因素来解释实验测定的MAP和NaAP·HAP的二次谐波相对强度的顺序。     

Electron-density-dependent fused-sphere surfaces derived from pseudopotential calculations

Fused-sphere surfaces can be used to mimic a molecular boundary associated with a constant value of the electron density. The simplest of such fused-sphere models are constructed by using the atomic radii for the spherical isodensity surfaces of individual atoms. In this work, we discuss the extension of this model to molecules containing atoms beyond the second row. In these many- electron systems, the computation of electron densities is usually simplified by adopting a pseudopotential (or effective-core potential) approach. Here, we discuss the performance of large- and small-core pseudo-potential calculations as a tool to derive atomic radii. Our results provide an optimum set of variable radii that can be used to build fused-sphere surfaces. This continuum of surfaces provides a simple approximation to the low-electron-density regions around molecules with heavy atoms.     

SAPO—11分子筛用i—Pr2NH导向合成及其酸性研究

以ＡｌＰＯ４、Ｈ３ＰＯ４、ＳｉＯ２等为原料采用单一模板剂ｉＰｒ２ＮＨ合成了ＳＡＰＯ１１分子筛，利用Ａｖｒａｍｉ方程等对合成过程进行了定量描述。还利用红外（ＩＲ）、程序升温脱附（ＴＰＤ）、线性丁烯骨架异构反应催化活性测试等手段表征了ＳＡＰＯ１１的酸性。结果表明，合成过程随温度有明显变化，晶化阶段的活化能远高于核化阶段的值。可用Ａｖｒａｍｉ方程的参数来表征合成过程的难易程度。分子筛中存在Ｂ酸和Ｌ酸位，主要在中等强度范围，从而对线性丁烯骨架异构反应有较好的催化活性。提高分子筛中硅含量可明显增大酸位浓度，酸强度也有轻度增强。     

Reaction of salicyl phosphites with hexafluoroacetone imine

Benzo-1,3,2,dioxaphosphorin-4-ones react with hexafluoroacetone imine to form 2-R-2,5-dioxo-3,3-bis(trifluoromethyl)-6,7-benzo,1,4,2-oxozaphosphepanes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No, 12, pp. 3008–3010, December, 1996.     

红外光谱研究甲烷和氧与SrO-La2O3/CaO表面的相互作用

在甲烷氧化偶联（ＯＣＭ）反应条件下，用原位红外光谱研究ＳｒＯ－Ｌａ２Ｏ３／ＣａＯ催化剂，结果表明，晶格氧使甲深度氧化，Ｌａ２Ｏ３和ＣａＯ具有活泼的晶格氧，ＳｒＯ的晶格氧比较稳定，气相氧通过催化剂表面消耗掉的晶格氧，加速甲烷了深度氧化，另一方面，催化剂表面的碳酸根物种在氧气氛下分解，在Ｌａ２Ｏ３和ＬＣ催化剂中，催化剂表面Ｌａ２Ｏ２（ＣＯ３）的分解形成配位不饱和的晶格氧Ｏ＾２－，并为气相氧吸附提供氧空     

Co(II) Schiff碱载氧载氮性能研究

运用INDO－UHF计算方法研究了CO(Ⅱ) Schiff碱的载氧特性，结果表明，Co(Ⅱ)与O_2的作用是通过σ键组合，并具有较明显的反铁磁性耦合作用, 论证了作为第五轴向配体在可逆载氧过程中的必要性，对比研究了Co－N_2的相互作用. 计算表明，CO(Ⅱ)的Schiff碱络合物可能作为氧氮分离的活性物质，从而具有一定的、潜在的工业应用价值.