Concurrence and Wigner-Yanase Skew Information

A measure of entanglement on n qubits is defined in terms of Wigner-Yanase skew information. It is shown that the measure coincides essentially with the concurrence on two qubits. This uncovers the information-theoretic meaning of the concurrence of entangled states.     

NA序列下经验分布函数的渐近正态性及其应用

本文在NA负相协序列下利用熟知的相依情形的大小块分割的方法,建立了经验分布函数的渐近正态性．作为在可靠性中的应用,得到了生存函数■(x)=P(X＞x)估计的渐近正态性．     

Teleportation of Multi-qudit Entangled States

We propose a method to realize the teleportation of an unknown entangled state that consists of many qudits through a partially entangled-qudit quantum channel with the help of 2 log2 d-bit classical communication. The operations used in the teleportation process include a generalized Bell-state measurement and a series of singlequdit π-measurements performed by Alice, a series of generalized qudit-Pauli gates and two-level unitary gates, as well as a qubit measurement performed by Bob. For a maximally entangled quantum channel, the successful probability of the teleportation becomes unit.     

Entangled States Based on Two Coherent States 3π/2 out of Phase

Entangled states based on two coherent states 3π/2 out of phase with each other, i.e. ｜α〉 and e^iФ｜-iα〉, as well as on a special state with a relative phase Ф = ｜α｜^2, are constructed. By analysing the amount of entanglement it is evident that entangled states based on this special state can be used as an excellent resource for quantum teleportation. It is also revealed that these entangled states possess some nonclassical features.     

正态模糊格点的Feynman规则和轴矢流反常

在正态模糊格点费米子方案中,一个合理的自洽的Fourier变换显示了动量空间中周期性的破缺,从而避免了多余的费米子模.本文并讨论了弱耦合极限下模糊格点的费曼规则,计算了轴矢流反常的单圈微扰结果,获得了标准的Adler-Bell-Jackiw手征反常项.     

q变形对相干态的相位概率分布特性

通过推广Pegg和Barnett的相位算符和相位态到q变形的双模情况, 应用数值计算 研究了q变形对相干态的相位概率分布特性. 结果表明, q变形对相干态的相位概率分布受到相位参数、q参数和参数│ξ│的调节, 从而反映出不同的量子相干特性.     

精密垫片精冲工艺有限元分析与模具设计

精密垫片零件，如图1所示，零件材料为1Cr18Ni9Ti，强度大（σb=650MPa），有一定塑性。从零件尺寸精度看，φ4mm外圆为IT7级精度，φ4mm外圆与φ2mm内孔有很高的同轴度要求，冲裁断面与零件两端面有垂直度要求，普通冲压不能达到零件精度：从工序的角度看，有冲孔和落料工序，剪切面粗糙度Ra≤3．2μm，属于光洁冲裁范畴；另外，技术条件中要求零件两大面不得有任何划伤，且光滑平整。总体上看，该零件的冲压加工性不好，难度较大，对模具的设计、选材、制造要求都较高。     

镍-酸性铬兰K络合物吸附波

用微分脉冲溶出伏安法研究了镍(11)与酸性铬兰K(ACBK)所生成的络合物在悬汞电极上的电化学特性及电化学反应机理，发现电极反应为镍与酸性铬兰K所生成的络合物吸附在电极表面后发生的不可逆还原。在HCl-硼砂介质中(pH8．67)，络合物在-316mV处有一吸附还原峰，其峰电流与镍浓度在0．001～0．010μ/mL范围内呈现良好的线性关系，其最低检出浓度为0．0005μg／mL。     

CHBr薄膜制备的初步研究

碳氢（cH）及其掺杂材料常被用作ICF实验靶丸烧蚀层材料。制备CH薄膜及其掺杂材料的方法有很多，诸如：离子束辅助沉积、离子溅射沉积、低压等离子体化学气相沉积（LPPCVD）等。近年来，详细研究了LPPCVD法制备CH薄膜的制备方法与工艺，形成了比较成熟的技术路线与工艺路线，并为“神光”实验提供了一系列实验靶丸。     

第I种非对称三态叠加多模叠加态光场的高次和压缩——第一正交分量的N次方H压缩效应

构造了第孙中禹种强度不等的非对称三态叠加多模叠加态光场|ψ₁^(ABC)〉_q.利用多模压缩态理论研究了态|ψ₁^(ABC)〉_q第一正交分量高次和压缩.结果发现:①当构成态|ψ₁^(ABC)〉_q的三个多模相干态光场的强度不相等时,在一定条件下,态|ψ₁^(ABC)〉_q的第一正交分量可出现任意幂次的高次和压缩.②当上述的三个多模相干态光场强度相等时,态|ψ₁^(ABC)〉_q的第一正交分量的高次和压缩现象消失.在这种情况下,态|ψ₁^(ABC)〉_q的第一正交分量恒处于NH最小测不准态.