轻工业纤维素生物质过程残渣能源化技术

以农产品为原料的轻工业大都是典型的流程工业,在通过转化过程将原料转化为食品、饮料、添加剂、调味料、纸和中成药等产品的同时产生被称为过程残渣的固体废物与废料,如白酒糟、酒精糟、醋糟、甘蔗渣、中药渣、油粕、酱渣、菌渣和造纸黑液可熔渣等.这些残渣产生于特定的生产过程,富含纤维素、蛋白质或木质素,因此代表一种已经被集中的生物质资源.它们同时含水50%-80%、易腐烂变质、甚至呈弱酸碱性,因此是重要的环境污染源.本文着眼于轻工生物质过程残渣的高值化利用,分析指出富含纤维素的白酒糟、醋糟、甘蔗渣、中药渣、茶渣和造纸边角料等适合作为生物质能源而被转化利用,并根据资源特征提出了可能的技术路线.通过分别对热化学路线涉及的脱水干燥、燃烧发电与气化发电技术和集成乙醇发酵、沼气发酵的复合转化技术进行技术综述,最后针对不同规模的富含纤维素轻工生物质过程残渣能源化提供了技术选择建议.     

油烟污染及其排放控制技术

烹调油烟已经成为城市三大公害之一, 对环境和人体健康造成了巨大危害, 油烟治理势在必行. 本文介绍了油烟的组成、分析方法和主要危害, 阐述了各类油烟净化技术的技术特点, 分析了油烟净化的国内外研究动态, 指出催化燃烧技术是油烟污染控制技术的发展趋势.     

垃圾衍生燃料流化床燃烧过程中HCl和NOx的排放研究

在床总高为4040mm的变截面流化床中试规模装置内，研究垃圾衍生燃料(RDF)在气化和燃烧不同阶段中NOx和HCl的生成特性。含NaCl的垃圾衍生燃料在流化床内燃烧，燃烧低于640℃时，Ca(OH)2的脱氯效果比较好;但随着温度升高，烟气中HCl的体积分数迅速增长，但脱氯效果明显受到CaCl2化学反应平衡的限制。燃烧状况特别是氧的体积分数对NOx的生成影响比较大。含氮量高的RDF燃烧产生NOx的体积分数明显高于低含氮燃料所产生的。     

Modified Ceria-Zirconia Fluorite-Like Catalysts for the Combustion of Methane

For dispersed ceria-zirconia-based solid solutions prepared via the polymerized complex method and annealed at 700℃, effects of bulk doping by Ca, Mn, Co, Bi or Nb cations and surface modification by Mn and Pt on their structural features, surface/bulk oxygen reactivity and catalytic activity in methane combustion are considered. With up to 20 mol% doping, a structural type of homogeneous solid solutions of anion-deficient fluorite with disordered anion vacancies is formed. Doping by transition metal cations or Pt increases the mobility and reactivity of the surface/bulk oxygen. A broad variation in specific rates of methane combustion for the studied systems was observed, suggesting structural sensitivity of this reaction. In general, there is no universal relationship between the oxygen mobility, the reactivity and the catalytic activity in methane combustion, which is explained by the factor of specific methane activation on surface active sites. For the Pt-promoted samples, Pt efficiency in methane activation depends on the Pt-support interaction, and the most favorable ones being mixed Pt/MnOx and Pt/NbOx clusters on the surface of the supports that exhibit high lattice oxygen mobilities.     

氧瓶燃烧—冷原子吸收法测煤样中痕量汞

采用氧瓶燃烧－针筒注射－冷原子吸收法测煤样中痕量汞，并对测定条件进行研究。方法简便、快速、干扰少，汞含量在０￣１０．０ｎｇ／５０ｍｌ时遵守比耳定律。用于样品的测定，结果令人满意。     

氧弹燃烧灰化法测定有机物中磷

用氧弹燃烧法灰化有机物进行元素测定，操作简便，快速，无污染，该方法用于有机物中磷的分析，结果可靠。     

石油焦与煤混合燃料热重分析研究

石油焦与煤混合燃烧是高效处理石油焦的有效方法，作者对选用的石油焦和煤不同配比的混合燃料进行了热重分析研究。使用常压高温热天平研究、分析了各配比混合燃料的热解特性和燃烧特性。并根据化学动力学方法计算了各过程的化学动力学参数，即活化能E和频率因子A0。结果表明，各混合燃料热解起始温度大致相同，随煤焦比减小，挥发分析出速率变缓，最大释放速度所对应的温度升高，最终失重率减小，挥发分释放特性指数减小；随煤焦比增大，混合燃料着火温度和燃尽温度逐渐降低，最大燃烧速率所对应的温度降低，燃烧特性指数增大；随煤焦比减小，活化能和频率因子增大。     

Cu-Mg/Al复合氧化物催化碳颗粒物燃烧性能的研究

恒定二价与三价阳离子比为3(nM2+/nM3+=3),采用共沉淀法制备不同Cu含量的系列水滑石前驱物, 800 ℃焙烧4 h形成复合氧化物(CuO质量百分数分别为0％、5％、10％、15％、20％、30％、40％)用作柴油车排放碳颗粒物燃烧的催化剂,并采用XRD、BET、TG-DSC、FT-IR、TPR等表征手段研究了Cu、Mg含量对材料前驱物物化性能的影响及对其衍生复合氧化物催化碳颗粒物燃烧性能的影响．结果表明,Cu、Mg含量对材料的热稳定性、比表面和催化氧化活性有显著的影响. Mg有助于提高催化剂的热稳定性; Cu含量增加,催化剂比表面下降,但比表面不是影响催化剂活性的主要因素. CuO含量为15％时,催化剂具有最好的催化活性和稳定性,碳颗粒物的起燃温度(T10)和半转化温度(T50)分别为336 ℃和409 ℃.在CuO含量≤30％时可以形成结构完整的水滑石前驱物, CuO含量为40％时出现Cu(OH)2杂相; CuO含量< 20％时,经高温焙烧可得到均匀的复合氧化物, CuO含量≥20％时出现CuO偏析． TPR结果表明焙烧温度和复合氧化物的组成决定了材料的可还原性能．     

旋流煤粉燃烧的一维综合数值模拟

发展了综合考虑气－固两相旋流流动，气相燃烧，颗粒相变与燃烧及两相辐射传热的旋流煤粉燃烧－维数学模型，给出了气－固两相能量方程中颗粒相就源项的计算表达式，应用这一模型对涡旋燃烧炉环形通道内多组工况的旋流气体燃烧和煤粉燃烧进行了数值模拟，计算得到的炉内温度分布和燃烧效率与实验数据基本相符，表明本文建立的模型可用于旋流煤粉燃烧的一维综合数值模拟。     

凝胶-燃烧法合成YAG∶Eu3+纳米荧光材料的结构和发光性能

Y₃Al₅O₁₂∶Eu nanophosphors were synthesized by a gel combustion method. The structure of phosphors was characterized by XRD and FTIR. YAG phase came to occur when YAG∶Eu precursors were sintered at 800 ℃, although the phase was mainly amorphous. The organic groups pyrolyzed completely and pure YAG phase was obtained in the samples sintered at 900 ℃. In the formation of YAG phase, no intermediate phases such as YAP and YAM were detected. Both ⁵D₀ → ⁷F₁ orange and ⁵D₀ → ⁷F₂ red emission could be observed for all the sintered samples. However, the emission of amorphous samples was greatly different from that of crystalline ones. The former was mainly ⁵D₀→ ⁷F₂ red emission, but the latter was ⁵D₀ → ⁷F₁ orange emission. As sintering temperature rises, the ratio of orange to red for phosphors increases. Eu could be doped up to 8% in YAG host lattice, and fluorescence quenching was absent. It indicated that the gel combustion synthesis method can increase emission intensity and quenching concentration due to a good distribution of Eu³⁺ activators in Y₃Al₅O₁₂ matrix.