红细胞膜上各种磷脂中脂肪酸的测定

应用自制硅胶板的薄层色谱法分离了红细胞膜上四种主要磷脂。将分离后的每种磷脂斑点硅胶涂层刮下，不经萃取，直接在无水甲醇－苯－乙酰氯溶液中进行转移甲基化，然后用毛细管相色谱分离测定其脂肪酸组成和含量。上述方法已成功地用于先天愚型病人和正常人红细胞膜上各种磷脂中脂肪酸轮廓分析，获得有意义的结果。     

杉木针叶磷脂酰甘油脂肪酸组成分析

用改进的DEAE阴离子交换柱色谱法和硅胶薄层色谱法分离制备杉木针叶磷脂酸甘油，用气相色谱法测定了它的脂肪酸组成。分析结果表明，抗寒性强的杉木品种的针叶磷脂酰甘油脂肪酸的（18:1＋18:2＋18:3）／[16:0＋16:1（3t）]比值比不抗寒品种的高。     

胆酸钠与支撑磷脂双层膜作用的电化学研究

采用电化学方法研究胆酸钠(NaC)与s-BLM的相互作用, 并结合实验结果对NaC与s-BLM的作用机理进行了讨论.     

囊泡表面分子间通讯交流体系的构建: 利用受体的分子识别行为调控酶的活性

在人工双层膜囊泡表面, 构建了一个通过人工受体的分子识别行为控制酶反应活性的超分子体系. 体系以生物体细胞信号转导系统为模拟原型, 由作为受体的烷基胺、被受体识别的信号分子吡哆醛衍生物、乳酸脱氢酶、受体和酶之间的媒介物Cu^2＋以及作为体系载体的合成肽脂囊泡五个成分构成．通过UV-vis光谱法及动态光散射测定对体系进行了评价, 结果表明: 随着受体疏水参数增大, 其对信号分子的识别能力增强, 二者呈良好的线性关系; 通过信号分子与囊泡表面静电相互作用的研究表明信号分子具有选择性; 媒介物与信号分子–受体可形成化学计量比为1∶2的配合物, 其形成能力比媒介物与酶的结合能力更强．作为结论, 体系中烷基胺受体对磷酸吡哆醛信号分子的识别有效控制了处于囊泡表面的乳酸脱氢酶的活性．     

二亚油酰磷脂酰胆碱分析

通过HPLC/HPLC-MS研究了二亚油酰磷脂酰胆碱的测定方法,磷脂样品首先经过HPLC分离得到磷脂酰胆碱,该磷脂酰胆碱再进一步通过不同的HPLC系统分离二亚油酰磷脂酰胆碱,并通过标准样品和质谱进行二亚油酰磷脂酰胆碱的定性.定量方法通过标准样品外标法定量,由方法的回收率和精密度试验可知,该方法已用来测定一般磷脂样品和磷脂酰胆碱样品中的二亚油酰磷脂酰胆碱含量.     

Spectrophotometric and Voltammetric Studies on the Interaction of Heparin with Phenosafranine

The interaction of phenosafranine （PSF） with a glycosaminoglycans of heparin （Hep） in aqueous solution has been characterized by UV-Vis absorption spectrophotometry and cyclic voltammetry in pH 1.5 Britton-Robinson （B-R） buffer solution. The addition of Hep caused decrease of the absorbance of PSF at 532 nm and the redox peak current of PSF. The study showed that an supramolecular complex of PSF-Hep was formed because of the electrostatic attraction of negatively charged Hep with the positively charged PSF, which resulted in the decrease of the equilibrium concentration of PSF in solutions, and the decrease of the absorbance or the peak current of PSF. The stoichiometry of the Hep/PSF complex was further calculated by voltammetric data with the result of 1：1 complex.     

高多孔度多孔硅自支撑膜的制备与表征

发光多孔硅由于在光电子学方面的应用前景而引起人们极大的关注[1]．最近多孔硅发光二极管的研究方面取得了重大进展[2]。但是，有关多孔硅的发光机制仍然存在着争论[1，3，4]，利由于消除了单晶硅衬底的影响，对脱离了硅衬底的多孔硅自支撑膜能够进行普通多孔硅所不能进行的一     

Carbon-Supported Silver Catalysts for CO Selective Oxidation in Excess Hydrogen

Carbon materials were used as supports for Ag catalysts that are prepared using the conventional wet impregnation method, and their catalytic properties for CO selective oxidation in excess hydrogen at temperatures below 483 K were tested. A variety of techniques, e.g. N2 adsorption, XPS, TPD, UV-Vis DRS, TEM and SEM, were used to determine the influence of physical and chemical properties of the carbon on the properties of Ag catalyst. It was found that defects on the carbon surface served as nucleation sites for silver ions, while functional groups on carbon surface induced their reduction to the metallic form. The formation of silver particles on carbon was governed by homogeneous and/or heterogeneous nucleation during the impregnation and subsequent activation processes. The best catalytic performance was obtained with a Ag/carbon black catalyst with a uniform size distribution of silver nanoparticles (about 12 nm), moderate BET surface area (with a mesoporous structure), and a limited amount of carbon-oxygen groups. The research indicates that carbon materials are potentially good supports for silver catalysts for preferential oxidation of CO in excess hydrogen.     

钴离子在P507为载体的支撑液膜中的传输

本文用国内的膜材料设计了以2-乙基已基膦酸单(2-乙基已基)酯(HEH(EHF),P_(507))为载体的支撑液膜迁移钴的实验,获得的数据为深入实验提供了依据.基本原理支撑液膜(SLM)是依靠微孔塑料薄膜(支撑体)微孔的毛细管作用将含萃取剂(载体)的有机溶液吸附在支撑体上.P_(507)萃取钴表示为:     

海藻酸-磷脂微囊复合水凝胶的制备、表征及毒理学分析

采用薄膜分散法合成磷脂微囊,根据胶粒的双电层理论,通过在微囊中加入氯化锰、氯化钙和氯化镁电解质溶液,使微囊处于相对稳定的状态.研究发现加入氯化锰和氯化钙溶液,微囊胶体的粒径没有明显的变化,但加入一定浓度氯化镁溶液,其粒径明显变大.为了进一步增加磷脂微囊稳定性,将氯化锰、氯化钙、氯化镁磷脂微囊胶体分别与海藻酸钠(SA)溶液混合.结果表明,氯化镁与SA几乎不能形成水凝胶,氯化钙与SA形成水凝胶能力强于氯化锰.微囊胶体溶液中的磷脂酰丝氨酸(PS)可以与Ca~(2+)和Mg~(2+)键合形成PS-Ca~(2+)和PS-Mg~(2+),但不能与Mn~(2+)键合形成PS-Mn~(2+).对氯化钙磷脂微囊与海藻酸钠合成的复合水凝胶的形貌、溶胀率及细胞毒性进行了表征,结果表明,氯化钙与SA形成的水凝胶可以捕获胶体中磷脂微囊,且形貌规整,结构稳定,无细胞毒性.