Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang     

金属UV光敏薄膜的实验研究

介绍了金属Au和Al薄膜的制备方法，研究了其UV光电发射特性，并做了寿命实验。给出了在真空中以及放在大气中光电发射衰减的情况。指出了其在大气中达到一个稳定值之后，再反复多次暴露于干燥大气时仍存在一个稳定光电发射周期的特点，可长达数月。金属薄膜有一个最佳膜层厚度，这与光电发射逸出深度、膜层结构等密切相关。近年来光电子成像器件发展非常迅速，急需光电发射均匀的面电子源，因此在微通道板的特性测试和像管的动态模拟中，Au和Al金属薄膜成为被优选的对象。     

压电陶瓷压电特性的激光调制法测量研究

介绍可测量压电陶瓷压电特性的激光干涉调制测量方法.采用相干检测原理对信号进行提取,不仅可以抑制噪声对干涉信号的影响,而且还可以大大降低光电探测器和电路的1/f噪声.与通常干涉仪测量方法相比,这种方法具有测量灵敏度高等优点.利用该方法对压电陶瓷压电特性进行了测量,讨论了激励电压信号的频率、幅度对压电陶瓷压电常数d₃₁的影响,并对其压电迟滞曲线进行了测量.     

无电极电光电场传感器灵敏度提高的研究

从提高灵敏度角度出发,理论上分析了无电极电光电场传感器电极长度与灵敏度和带宽的关系.通过比较不同结构的传输函数,验证平衡检测方式的可行性,最后选取使用平衡检测的三端口结构作为实验器件结构,从而为器件制作的可行性方案从理论上作了验证.     

Hα Emission Imaging during Supersonic Molecular Beam Injection by CCD Photograph

There are several fuelling methods for tokamak plasma： pellet injection （PI）, gas puffing （GP）, neutral beam injection （NBI） and supersonic molecular beam injection （SMBI） .SMBI has been created in the Southwestern Institute of Physics, China.     

高灵敏度X光探测系统

对高灵敏度X光探测系统结构和灵敏度进行了阐述，给出了厚度差为0．1mm的铜台阶在低照射量下的透视图像及处理结果，证明了系统具有高的灵敏度。     

大口径激光波前测量方法

采用大型透镜阵列对激光波前进行采样，实现了对宽光束的测量。大口径激光束经过大型透镜阵列进行采样形成光斑点阵，通过成像系统，获取点阵图像，得到激光束波前信息，根据激光传输理论和光学系统像差理论，已知激光束的波前函数和强度分布时，可以求出激光束会聚后在焦面处任意位置的光强，因此激光束的波前、发散角、近场分布、远场分布等参数能够通过测量求解得到。     

强光光学元件波前检测算法

针对强光光学元件高精度检测中使用的两个新参数一——波前位相梯度和功率谱密度的数值计算方法进行了研究，并对目前使用的大口径干涉仪传递函数进行了实验标定。     

基因芯片共焦扫描仪的分辨率与信噪比

介绍基因芯片共焦扫描仪的系统结构和工作原理，讨论基因芯片共焦扫描仪的光学成像系统二维分辨率与信噪比之间的定量关系。所得出的结果对于选择共焦显微成像系统的参数和评价共焦显微成像系统的性能具有重要的意义。