Effect of 60Co γ-irradiation on structural and optical properties of thin films of Ga10Se80Hg10

Thin films of Ga₁₀Se₈₀Hg₁₀ have been deposited onto a chemically cleaned Al₂O₃ substrates by thermal evaporation technique under vacuum. The investigated thin films are irradiated by ⁶⁰Co γ-rays in the dose range of 50–150 kGy. X-ray diffraction patterns of the investigated thin films confirm the preferred crystallite growth occurs in the tetragonal phase structure. It also shows, the average crystallite size increases after γ-exposure, which indicates the crystallinity of the material increases after γ-irradiation. These results were further supported by surface morphological analysis carried out by scanning electron microscope and atomic force microscope which also shows the crystallinity of the material increases with increasing the γ-irradiation dose. The optical transmission spectra of the thin films at normal incidence were investigated in the spectral range from 190 to 1100 nm. Using the transmission spectra, the optical constants like refractive index (n) and extinction coefficient (k) were calculated based on Swanepoel’s method. The optical band gap (E_g) was also estimated using Tauc’s extrapolation procedure. The optical analysis shows: the value of optical band gap of investigated thin films decreases and the corresponding absorption coefficient increases continuously with increasing dose of γ-irradiation.     

新型环状聚(ε-己内酯-co-γ-三乙基硅氧基-ε-己内酯)的合成

设计合成了具有精确分子结构的聚合物对深入了解其结构与性能之间的关系起着至关重要的作用。研究了一种合成带有三乙基硅氧侧基的环状无规共聚酯的新方法。功能性单体γ-三乙基硅氧基-ε-己内酯(γ-Et3SiOεCL)和ε-己内酯(ε-CL)在环状引发剂2,2-二丁基-2-锡-1,3-二氧环庚烷(DSDOP)的作用下,进行活性开环聚合反应以制备活性环状无规共聚酯(LCP(εCLcoγEt3SiOεCL))前体,当单体完全转化后,以该活性环状前体作为大分子引发剂,引发反应性单体α-(1-丙烯酰氧乙基)-ε-己内酯(αAEεCL)进行嵌段聚合反应,合成了在活性中心附近带有不饱和双键的功能性环状嵌段共聚酯,即活性环状聚(ε-己内酯-co-γ-三乙基硅氧基-ε-己内酯)-b-(α-(1-丙烯酰氧乙基)-ε-己内酯)。最后该活性环状嵌段共聚酯在紫外光照射下,反应性单体结构单元中的双键发生分子内交联反应,从而制得稳定的不含有机锡的新型环状无规共聚酯cP(εCLcoγEt3SiOεCL)(Mn,NMR=28500)。采用SEC、1H NMR以及DSC等技术手段对聚合物的结构和性能进行表征。该方法的突出特点是能够高效地合成带有功能性侧基的高相对分子质量的环状无规共聚酯。     

CH4 reforming with CO2 for syngas production over La2O3 promoted Ni catalysts supported on mesoporous nanostructured γ-A12O3

Nanostructured -y-A12O3 with high surface area and mesoporous structure was synthesized by sol-gel method and employed as catalyst support for nickel catalysts in methane reforming with carbon dioxide. The prepared samples were characterized by XRD, N2 adsorption-desorption, TPR, TPO, TPH, NH3-TPD and SEM techniques. The BET analysis showed a high surface area of 204 m2.g-1 and a narrow pore-size distribution centered at a diameter of 5.5 nm for catalyst support. The BET results revealed that addition of lanthanum oxide to aluminum oxide decreased the specific surface area. In addition, TPR results showed that addition of lanthanum oxide increased the reducibility of nickel catalyst. The catalytic evaluation results showed an increase in methane conversion with increasing lanthanum oxide to 3 mol% and further increase in lanthanum content decreased the catalytic activity. TPO analysis revealed that the coke deposition decreased with increasing lanthanum oxide to 3 mol%. SEM and TPH analyses confirmed the formation of whisker type carbon over the spent catalysts. Addition of steam and Oxide to drv reformin feed increased the methane conversion and led to carbon free ooeration in combined orocesses.     

Coking-resistant Ni-ZrO2/A1203 catalyst for CO methanation

Highly coke-resisting ZrO2-decorated Ni/A1203 catalysts for CO methanation were prepared by a two-step process. The support was first loaded with NiO by impregnating method and then modified with ZrO2 by deposition-precipitation method （IM-DP）. Nitrogen adsorption- desorption, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, thermogravimetdc analysis, H2 temperature- programmed reduction and desorption, NH3 temperature-programmed desorption, and zeta potential analysis were employed to characterize the samples. The results revealed that, compared with the catalysts with the same composition prepared by co-impregnation （CI） and sequential impregnation （SI） methods, the Ni/A1203 catalyst prepared by IM-DP showed much enhanced catalytic performance for syngas methanation under the condition of atmospheric pressure and a high weight hourly space velocity of 120000 mL.g-1 .h-1. In a 80 h life time test under the condition of 300-600 ~C and 3.0 MPa, this catalyst showed high stability and resistance to coking, and the amount of deposited carbon was only 0.4 wt%. On the contrary, the deposited carbon over the catalyst without ZrO2 reached 1.5 wt% after a 60 h life time test. The improved catalytic performance was attributed to the selective deposition of ZrO2 nanoparticles on the surface of NiO rather than A1203, which could he well controlled via changing the electrostatic interaction in the DP procedure. This unique structure could enhance the dissociation of CO2 and generate surface oxygen intermediates, thus preventing carbon deposition on the Ni particles in syngas methanation.     

利用自由基引发的1,2-炔基迁移实现非活性烯烃的炔膦酰化

研究了1,4-烯炔衍生物与二芳基膦氧化物在银介导下发生的炔酰化反应.该反应利用自由基引发的1,2-炔基迁移策略合成了一系列γ-酮膦氧化物,产率适中.该反应机理可能涉及膦中心自由基与乙烯基的加成、3-exo-dig环化和1,2-炔基迁移等连续的过程,一步形成了C-P、C-C键等化学键,实现了非活性烯烃的双官能化.     

In-silico therapeutic investigations of arjunic acid and arjungenin as an FXR agonist and validation in 3T3-L1 adipocytes

The present study was to illustrate the agonistic property of arjungenin and arjunic acid towards farnesoid X receptor protein (FXR).The pharmacokinetic properties like molecular interactions, absorption, distribution, metabolism, elimination and toxicity (ADMET) of the ligands were checked through in-silico studies. Protein-ligand docking was carried out using autodock software. Molecular docking analysis confirmed strong binding energy and interaction of arjungenin and arjunic acid with the target protein and the ADMET profiles identified for both compounds were promising.Further in vitro studies were performed in 3T3-L1 adipocyte to verify the agonistic property of arjungenin and arjunic acid. Oil red O staining was done to check differentiation induction. Adiponectin, leptin, triglycerides and total cholesterol levels were quantified. The mRNA expression of FXR, Cyp7a1, PPAR-γ and SREBP-1c were quantified using fluorescent real-time PCR. Cytotoxicity assay was confirmed that up to 150 μM concentration there is no significant cell death on treatment with arjunic acid and arjungenin. Treatment with arjungenin and arjunic acid confirms increased differentiation of the cells with significant (P < 0.05) increase in adiponectin (118.07% and 132.92%) and leptin (133.52% and 149.74%) protein levels compared to the negative control group. After treatment with arjungenin and arjunic acid in 3T3-L1 preadipocytes the mRNA expression of FXR, PPAR-γ and SREBP-1c were significantly (P < 0.01) increased and cyp7a1 was significantly (P < 0.01) decreased when compared with the negative control group. Overall, our results suggest that arjungenin and arjunic acid acts as an FXR agonist and may be useful for rational therapeutic strategies as a novel drug to treat cholesterol mediated metabolic syndrome and insulin resistance.     

Direct Asymmetric α-Selective Mannich Reaction of β,γ-Unsaturated Ketones with Cyclic α-Imino Ester: Divergent Synthesis of Cyclocanaline and Tetrahydro Pyridazinone Derivatives

The first regio-, diastereo-, and enantioselective direct Mannich reaction of β,γ,-unsaturated ketones with benzoxazinone cyclic imines was enabled by Lewis acid/Brønsted base cooperative catalysis. The dinuclear zinc complex catalyzed the reaction of a broad range of β,γ-unsaturated ketones to proceed at the α-site exclusively, leading to corresponding adducts with two consecutive tertiary carbon stereocenters in diastereomeric ratios of up to >20:1 and enantioselectivities generally in the 90–99 % ee range. These products were used as general intermediates in the synthesis of multisubstituted cyclocanalines, tetrahydro pyridazinones, and 4H-furo[2,3-b][1,4]benzoxazine derivatives.     

利用回归分析拟合Duncan-Chang双曲线E-γ模型的材料参数

介绍了回归分析的基本概念及求解回归系数的方法,并分析了利用回归分析Duncan-Chang双曲线E-γ土力学模型时所建立起的方程组的特点.而基于方程组的这些特点及材料参数的数值限制,提出了在求解之前需先设定其中一个材料参数R_f的值.最后,通过一个例子的分析,总结了回归分析计算结果的特点,并对R_f值之设定作出了说明及探讨.     

Total synthesis of myceliothermophins A-E

Total synthesis of an antitumor compound myceliothermophin A and related compounds based on a convergent synthetic strategy was investigated. A common decalin skeleton of myceliothermophins was stereoselectively constructed by an IMDA reaction. The fully elaborated precursor of myceliothermophins was obtained via aldol reaction of N-protected γ-methoxylactam with decalin aldehyde. By using Teoc group for the protection of nitrogen atom of lactam ring, selective deprotection prior to the hydrolysis of methoxyaminal moiety was successfully achieved to obtain γ-methoxylactams (myceliothermophins C and D). Subsequent hydrolysis of these compounds afforded the corresponding γ-hydroxylactam, and myceliothermophins A and B in high yield. Myceliothermophin E was also synthesized by dehydration of the obtained γ-hydroxylactams. The absolute configurations of myceliothermophins A-E were also successfully determined.     

Remarks on the formula for γ-interior

The paper presents a formula for the γ-interior of a set under special conditions for , more general than those in the previous paper [Acta Math. Hungar. 80 (1998) 89-93]. There are also some applications.