过渡金属氧化物对阻燃剂聚磷酸铵热分解的影响机制

过渡金属氧化物(MO)可以显著影响聚磷酸铵(APP)的热分解过程,进而改善APP复配膨胀阻燃聚合物材料的阻燃效率。将ZnO、Fe2O3、TiO2掺入到APP中,采用热失重分析(TGA)、X射线光电子能谱(XPS)和X射线衍射分析(XRD),考察了3种MO对APP热分解行为的影响,分析了相互作用过程中金属原子和磷原子化学结合状态的变化以及高温热分解产物的物相结构。TGA和XPS图谱分析结果表明,MO可降低APP的起始热分解温度,并催化APP释放NH3和H2O,而在热分解后期由于金属磷酸盐的形成可显著增加APP的高温残留量。3种MO催化APP热分解脱NH3和H2O的活性由大到小的顺序是:ZnO>Fe2O3>TiO2,而对APP凝聚相热分解P-O产物的交联能力从大到小的顺序为:Fe2O3>ZnO>TiO2。XRD结果显示,ZnO在高温下与APP反应生成了Zn(PO3)2晶体,而Fe2O3和TiO2与APP反应分别生成了Fe4(P2O7)3和TiP2O7晶体。     

PEG接枝氧化石墨烯的制备与细胞成像

通过酯化反应将不同分子量的聚乙二醇（PEG）接枝到氧化石墨烯（GO）表面,得到系列GO-PEG。利用傅里叶变换红外光谱（FTIR）、拉曼光谱（Raman）、扫描电子显微镜（SEM）对GO-PEG的结构和形貌进行了表征,用热重分析（TGA）测定了GO-PEG中PEG的接枝量。SEM结果表明GO-PEG的剥离程度高于GO。GO-PEG在磷酸盐缓冲溶液中具有良好的分散稳定性,稳定性与接枝量呈正相关。GO-PEG通过非共价键合作用对荧光素（Flu）的负载量可达1.75mg·mg^-1,且负载量受接枝量影响;另外,GO-PEG对Flu的释放行为具有pH值触发药物释放性能。将接枝PEG的端羟基与Flu共价键合,所得GO-PEG₆₀₀₀-Flu荧光探针实现了对HepG₂细胞的成像。     

基于烟酰腙Schiff碱的Cu(Ⅱ)和Ni(Ⅱ)配合物的合成、晶体结构和性质

采用缓慢挥发法合成了2个烟酰腙类Schiff碱配合物[Cu(Py)(HL¹)]₂ (1)和[Ni(L²)₂] (2), 其中, H₃L¹=2, 4-二羟基苯甲醛缩烟酰腙, HL²=2-乙酰基吡啶缩烟酰腙。采用元素分析、红外光谱、紫外光谱、荧光光谱和热重分析以及X-射线单晶衍射分析进行 了表征。结果表明, 1和2的晶体均属单斜晶系, P2₁/c空间群;1的晶胞参数a=0.739 86(12) nm, b=1.903 7(3) nm, c=1.154 86(19) nm, β=105.090(3)°, V=1.570 5(4) nm³;该化合物是中心对称的双核配合物, 每个Cu(Ⅱ)离子都处于畸变四方锥配位环境;结构基 元通过π-π相互作用和O-H…N氢键形成三维超分子。2的晶胞参数a=2.034 0(5) nm, b=1.183 2(3) nm, c=1.020 7(3) nm, V=2.456 1(11) nm³;中心离子Ni(Ⅱ)的配位数为6, 它处于畸变八面体配位环境。配合物有很高的热稳定性, 分解温度分别为315 ℃ (1)和358 ℃ (2)。     

基于数字式MEMS传感器的声阵列成像系统设计*

常规驻极体传声器阵列成像系统存在数据采集系统复杂、体积大的问题,因而阵列传感器数量一般不超过60个,成像质量较差。为此,本文以数字式MEMS声传感器基础设计了260个传感器的声阵列,数据采集系统由FPGA控制,并嵌入到前端阵列中,后端是在另一个FPGA控制下的1个DSP芯片和2个PC104模块组成的集成系统,其中高速DSP芯片完成阵列信号处理以实现声成像功能。该系统能够实现对普通车间环境下机械设备噪声、气体泄漏噪声的现场成像测试,形成动态声像图。测试表明,该系统抗干扰能力强、声像分辨率高、成像速度快,实用效果良好。     

红外成像系统NETD参数测试算法及应用研究

噪声等效温差(NETD)是表征红外成像系统灵敏度的关键参数,也是评估红外成像系统性能的重要参数之一,应用广泛。通过对红外成像系统3D噪声、信号传递函数(SiTF)、NETD等参数测试方法、算法和流程研究,给出一种基于视频文件的3D噪声离线对比测试方法和一种SiTF线性区自动判断计算斜率算法,在此基础上针对某型技术保障装备国产化光电检测平台开发了配套应用软件功能模块。实现了通过计算单位均方根噪声所对应的SiTF斜率值,分析得出系统NETD参数值的功能。以某型热像仪为被测对象,开展了测试结果重复性和一致性试验,并与美国Optikos公司I-SITE红外整机测试系统进行了对比测试。实验结果表明开发的NETD参数测试功能模块测试精度和重复性满足设计要求,具有较高实用价值,已进行了工程应用。     

航天相机热实验测试系统设计

为了检测航天相机在高低温环境中的电子学性能及可靠性,针对某型号航天相机地面热实验测试需求,设计开发出了一种热实验测试系统,详细介绍了系统的软硬件设计方案及控温策略。系统使用人机交互界面实现热控策略,能实时完成最高80个测试点(160个温度传感器及80路加热器)的控温任务,可以在－30℃～＋50℃范围内对航天相机进行全方位的温度监控,最高控温精度达到0.5℃。经过实际测试验证,系统具有很好的稳定性,能满足航天相机地面热实验的测试需求,工程应用价值高。     

A new approach to constant term identities and Selberg-type integrals

Selberg-type integrals that can be turned into constant term identities for Laurent polynomials arise naturally in conjunction with random matrix models in statistical mechanics. Built on a recent idea of Karasev and Petrov we develop a general interpolation based method that is powerful enough to establish many such identities in a simple manner. The main consequence is the proof of a conjecture of Forrester related to the Calogero–Sutherland model. In fact we prove a more general theorem, which includes Aomoto's constant term identity at the same time. We also demonstrate the relevance of the method in additive combinatorics.     

Characterization of size‐segregated aerosols using ToF‐SIMS imaging and depth profiling

Size‐segregated particles were collected with a ten‐stage micro‐orifice uniform deposit impactor from a busy walkway in a downtown area of Hong Kong. The surface chemical compositions of aerosol samples from each stage were analyzed using time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) operated in the static mode. The ToF‐SIMS spectra of particles from stage 2 (5.6–10 µm), stage 6 (0.56–1 µm), and stage 10 (0.056–0.1 µm) were compared, and the positive ion spectra from stage 2 to stage 10 were analyzed with principal component analysis (PCA). Both spectral analysis and PCA results show that the coarse‐mode particles were associated with inorganic ions, while the fine particles were associated with organic ions. PCA results further show that the particle surface compositions were size dependent. Particles from the same mode exhibited more similar surface features. Particles from stage 2 (5.6–10 µm), stage 6 (0.56–1 µm), and stage 10 (0.056–0.1 µm) were further selected as representatives of the three modes, and the chemical compositions of these modes of particles were examined using ToF‐SIMS imaging and depth profiling. The results reveal a non‐uniform chemical distribution from the outer to the inner layer of the particles. The coarse‐mode particles were shown to contain inorganic salts beneath the organics surface. The accumulation‐mode particles contained sulfate, nitrate, ammonium salts, and silicate in the regions below a thick surface layer of organic species. The nucleation‐mode particles consisted mainly of soot particles with a surface coated with sulfate, hydrocarbons, and, possibly, fullerenic carbon. The study demonstrated the capability of ToF‐SIMS depth profiling and imaging in characterizing both the surface and the region beneath the surface of aerosol particles. It also revealed the complex heterogeneity of chemical composition in size and depth distributions of atmospheric particles. Copyright © 2014 John Wiley & Sons, Ltd.     

Thermal-Induced Dimerization Cyclization of Ethyl N-(Styrylcarbamoyl)acetates: Formation of 4-Hydroxy-2(1H)-pyridone-3- carboxamide Derivatives

Thermal-induced dimerization cyclization of ethyl N-(styrylcarbamoyl)acetate derivatives has been investigated, leading to 4-hydroxy-2(1H)-pyridone-3-carboxamide derivatives with good yields in diphenyl ether on 200–210 °C. Ethyl N-(styrylcarbamoyl)acetate derivatives readily provided the intermolecular cyclization products 4-hydroxy-2(1H)-pyridone-3-carboxylates on reflux in xylene. In addition, several related 3-acetyl-4-hydroxy-5-phenylpyridin-2(1H)-ones have been prepared. It provided an efficient preparation of 4-hydroxy-2(1H)-pyridone-3-carboxamide derivatives.