Laser-induced breakdown spectroscopy in water: Improvement of the detection threshold by signal processing

Laser-induced breakdown spectroscopy (LIBS) has been performed on immersed solid samples with different grades of surface roughness and material homogeneity and on bulk water solutions. The underwater plasma was produced by applying double-pulse excitation at 1064 nm, with different sets of laser pulse energies. LIBS spectra were recorded separately for each couple of laser pulses in order to monitor shot-to-shot plasma behavior and to apply signal post processing. The latter was aimed at improving the detection limits for elemental analyses. Except in the case of flat homogeneous solid samples at high laser pulse energies, the measurements were affected by strong shot-to-shot signal oscillations. Automatic elimination of low intensity spectra reduced the detection limit up to a factor of seven. The optimum level for spectral filtering depends strongly on sample properties. For bulk water, a poor correlation was observed between the peak line intensities and the plasma continuum emission, making the peak-to-background ratio unsuitable for internal standardization purposes. The analytical performance of LIBS for bulk liquid was also affected by the spatial fluctuations of the breakdown location, a phenomenon known as “moving breakdown” in the literature, which was responsible for the signal depletion in the detection region. In preliminary measurements on water solutions, the detection limit of 0.2 mg/l for magnesium has been obtained after applying data post processing.     

Synthesis and red luminescence of Pr-doped CaTiO3 nanophosphor from polymer precursor

Uniform and sphere-like nanoparticles of crystalline Pr³⁺-doped CaTiO₃ have been prepared from complex polymer precursor at 600°C, in which, metal atoms are previously dispersed by citric acid in ethylene glycol solvent. The decomposition process of the precursor, crystallization, and particle sizes of CaTiO₃ have been investigated by using thermal analysis, powder X-ray diffraction and transmission electron microscopy. Diffuse reflectance spectra, photoluminescence and decay curve indicate that a strong red emission located at the nearly NTCS “ideal red” site is deduced from the energy transfer from the band gap absorption to doping Pr³⁺ ions. The thermoluminescence curves exhibit that a potential long phosphorescent material based on Pr³⁺-doped CaTiO₃ will be explored in future.     

Theoretical study of the local structure and Raman spectra of CaO-SiO2 binary melts

A procedure for the Raman spectra calculation of vitreous and molten silicates was presented in this paper. It includes molecular dynamics MD simulation for the generation of equilibrium configurations, Wilson's GF matrix method for the calculations of eigenfrequencies and corresponding vectors, electro-optical parameters method (EOPM) for the Raman intensity calculations, and the bond polarizability model (BPM) for the determination of polarizability and polarizability derivative. One of the most important characteristics of this procedure is the achievement of the partial Raman spectra of five tetrahedral units, as well as the total spectral envelope. In this paper, the calculation was carried out for the vitreous and molten calcium silicates with different compositions and at various temperatures. It is worthwhile to note that the calculation is based on statistical configurations distribution in the space and so it is not needed to artificially adjust the full width at half maximum (FWHM) of spectra. It was also tested through the good agreement of the calculated spectra with the experimental, including some regularity of spectral properties. According to the calculation, the symmetrical stretching of whole tetrahedral units, to which the stretching of Si-O(nb) bond gives the main contribution to intensity, is proven to be the dominance in the high-frequency range (800-1200 cm(-1)) and the symmetrical bending of Si-O(b)-Si, to which the stretching of Si-O(b) bond exhibits the main contribution, is the dominance in the medium-frequency range (400-700 cm(-1)). As the first theoretical results, the Raman scattering coefficient of each Q(i) was found little change along with the variation of composition and temperature.     

Preparation and characterization of aliphatic/aromatic copolyesters based on 1,4-cyclohexanedicarboxylic acid

A series of biodegradable aliphatic/aromatic copolyesters, poly(butylene terephthalate)-co-poly(butylene cyclohexanedicarboxylate)-b-poly(ethylene glycol) (PTCG), were prepared by a two-step melt polycondensation method and characterized by means of GPC, FTIR, NMR, DSC, TGA, etc. The effects of aliphatic ester content on the physical, mechanical and thermal properties, as well as in vitro and in vivo degradation behaviors were investigated. The decrease in mechanical strength was observed with an increase in poly(butylene cyclohexanedicarboxylate) (PBC) molar fraction. DSC results showed one melting point and two glass transition temperatures in all samples, and the melting temperature was found to go down gradually as more cyclohexanedicarboxylic acid (CHDA) was added. During the in vitro and in vivo degradation processes, erosion of the surface was dominant as evidenced by scanning electron microscopic observations. The copolyesters containing many CHDA units were featured by the higher water uptake and faster degradation due to much richer amorphous phase within them.     

Reduction of 4-nitrophenol catalyzed by nitroreductase

The reduction of 4-nitrophenol catalyzed by nitroreductase in the presence of NADH was investigated in this paper.4-Amino- phenol and 4-bydroxylamino-phenol were found in the reductive products.The relationship between reaction time and the reductive ratio were studied.The similar reducing ratios of 4-nitrophenol were obtained under aerobic and anaerobic conditions.The results indicated that an oxygen-insensitive reaction was proceeded in the reduction of 4-nitrophenol and nitroreductase was an oxygen- insensitive enzyme.The reductive products of 4-nitrophenol were determined by HPLC and MS.     

Total reflection X-ray fluorescence trace mercury determination by trapping complexation: Application in advanced oxidation technologies

It is well known that Hg species cause high noxious effects on the health of living organisms even at very low levels (5 μg/L). Quantification of this element is an analytical challenge due to the peculiar physicochemical properties of all Hg species. The regulation of the maximal allowable Hg concentration led to search for sensitive methods for its determination. Total reflection X-ray fluorescence is a proved instrumental analytical tool for the determination of trace elements. In this work, the use of total reflection X-ray fluorescence for Hg quantification is investigated. However, experimental determination by total reflection X-ray fluorescence requires depositing a small volume of sample on the reflector and evaporation of the solvent until dryness to form a thin film. Because of volatilization of several Hg forms, a procedure to capture these volatile species in liquid samples by using complexing agents is proposed. Acetate, oxalic acid, ethylenediaminetetracetic acid and ammonium pyrrolidine–dithiocarbamate were assayed for trapping the analytes into the solution during the preparation of the sample and onto the reflector during total reflection X-ray fluorescence measurements. The proposed method was applied to evaluate Hg concentration during TiO₂-heterogeneous photocatalysis, one of the most known advanced oxidation technologies. Advanced oxidation technologies are processes for the treatment of effluents in waters and air that involve the generation of very active oxidative and reductive species. In heterogeneous photocatalysis, Hg is transformed to several species under ultraviolet illumination in the presence of titanium dioxide. Total reflection X-ray fluorescence was demonstrated to be applicable in following the extent of the heterogeneous photocatalysis reaction by determining non-transformed Hg in the remaining solution.     

Preparation and characterization of self-assembled nanoparticles based on glycol chitosan bearing adriamycin

An anthracycline drug, adriamycin, was chemically conjugated onto the backbone of glycol chitosan via an acid-labile cis-aconityl linkage. The physicochemical characteristics of the glycol chitosan–adriamycin (GC–ADR) conjugates were investigated by dynamic light scattering, atomic force microscopy, and fluorescence spectroscopy. The GC–ADR conjugates were capable of forming nano-sized self-aggregates in an aqueous medium, when the adriamycin content in the conjugate was in the range of 2.0–5.0 wt.%. The self-aggregates were spherical in shape, and had mean diameters of 238–304 nm, depending on the adriamycin content. The critical aggregation concentrations of the conjugates, estimated by the fluorescence quenching method, were as low as 1.0–2.5×10⁻² mg/ml. The size of self-aggregates was not affected by the polymer concentration in the range from 50 to 2,000 μg/ml, and was maintained up to 8 days in phosphate-buffered saline (pH 7.4), indicating high colloidal stability. The release of adriamycin from self-aggregates was significantly dependent on the pH of the medium due to the cis-aconityl linkage; e.g., the amount of adriamycin released for 4 days was 7.3±0.3% at pH 7, whereas it was 29.3±1.9% at pH 4. The cell viability results demonstrated that free adriamycin shows more potent cytotoxicity than the conjugates, primarily attributed to the sustained release of adriamycin from self-aggregates. In conclusion, the self-aggregates, formed by GC–ADR conjugates, might be useful for the site-specific delivery of adriamycin in a sustained manner.     

有机硅弹性体表面生物相容性的研究进展

生物材料表面的生物相容性一直是生物材料研究领域倍受关注的问题.本文综述了对有机硅弹性体进行改性以提高其表面生物相容性的研究进展,介绍了各种常用的化学改性方法如本体接枝、等离子体处理、光化学诱导接枝、臭氧活化接枝以及硅氢加成反应、原子转移自由基聚合反应在有机硅弹性体表面改性中的应用.对改性后的有机硅弹性体表面抗非特异性蛋白质和血小板的能力等方面进行了评述,并进一步分析了有机硅弹性体表面化学改性的发展趋势和研究重点.     

Preparation and photochromism of diarylethene covalently bonded onto layered sodium-magadiite surfaces

Diarylethene derivatives (DE) covalently bonded to silanol oxygens of layered silicate surfaces, i.e., magadiite (Mag), were synthesized and investigated for their photochromic behavior. The DE-Mag layered hybrids were found to undergo reversible color change by alternating UV and visible light irradiation. A more highly efficient, reproducible photochromic behavior was realized with DE-Mag than with a corresponding DE-Si possessing silyl substituents on DE in place of the Mag surface. Moreover, the present covalently bonded DE exhibited an improvement over DE hybrids incorporated in layered double hydroxide (LDH) clays, in which the repetitive photochromic behavior decreased during alternating irradiation, due to the accumulation of the photochemically inert parallel isomers of DE.     

An infrared study on Langmuir–Blodgett films of 14,15-bis(hydroxyimino)-13-thiaoctacosane

The Langmuir–Blodgett (LB) films of 14,15-bis(hydroxyimino)-13-thiaoctacosane (TOC) on aluminium plated substrates were investigated using Fourier transform infrared (FTIR), grazing angle (GAIR) and horizontal attenuated total reflectance (HATR) techniques. The LB films of TOC can be transferred onto the solid substrate successfully. The molecular structure of LB films was analysis by comparing the GAIR and HTAR spectra. The intense bands at 2848 and 2918 cm⁻¹ are assigned to symmetric ν_s(CH₂) and asymmetric ν_a(CH₂) stretching vibrations of methylene groups. These peaks suggest that the alkyl chains in TOC are nearly in all-trans conformational state. The presence in the infrared spectra of several bands due to the methylene wagging and twisting modes and of the splitting of the bands due to the methylene scissoring mode at 1467 and 1459 cm⁻¹ and the CH₂ rocking mode at 720 and 731 cm⁻¹ also indicates that in films of TOC alkyl chains are in the all-trans conformation and packed in either an orthorhombic or a monoclinic structure with an orthorhombic subcell containing two mutually orthogonal molecules. Another conclusion presented in this paper that the alkyl chain tilt, which is the angle between the axis, which bisects the C–C bonds and the surface normal, was quite large by comparing the GAIR and HATR spectra.