Crystal structure of cobalt molybdate hydrate CoMoO4·nH2O

We have determined the crystal structure of the title compound, which has a triclinic cell with cell parameters of , , , α=76.617°, β=84.188°, γ=74.510° and space group . The crystal structure suggests the chemical formula CoMoO₄·3/4H₂O. The structure consists of MoO₄ tetrahedra and CoO₆ octahedra, confirming the earlier X-ray absorption near-edge spectroscopic (XANES) investigation on the hydrate. The comparison of the crystal structures of the hydrate and the α-,β-, and hp-phases shows that the hydrate exhibits metal cation coordinations similar to those of the β-phase, but had arrangements of CoO₆ and MoO_n polyhedra similar to those of the hp-phase.     

Absorption spectrum and crystal-field analysis of U4+ ions in CsCdBr3 single crystals

Single crystals of U⁴⁺:CsCdBr₃ were grown by the Bridgman–Stockbarger technique. It has been assumed, that U⁴⁺ ions are substituting two Cd²⁺ ions and possess the C_3v site symmetry. Thirty seven energy levels, located between 4000 and 25,000 cm⁻¹ and encompassing all but the ¹S₀ multiplet, were assigned from 7 K absorption spectra. The symmetry of the levels were determined on the basis of the observed small splitting of the Γ₃ doublets as well as by a comparison of low temperature absorption spectra of the U⁴⁺:CsCdBr₃ with that previously reported for U⁴⁺ in Cs₂UBr₆ and Cs₂ZrBr₆ single crystals. A crystal-field analysis was performed by fitting eight atomic (in the orthogonal formalism) and 6 crystal-field parameters to the experimental Stark levels with an r.m.s. deviation of 100 cm⁻¹. The obtained values of the Hamiltonian parameters are discussed and compared with those reported in previous analyses of U⁴⁺ ions. The relatively strong crystal field, resulting in N_v = 8530 cm⁻¹ proves that in the CsCdBr₃ crystals the U⁴⁺ ions are located at a high symmetry site.     

Preparation and properties of SiO2-TiO2 thin films from silicic acid and titanium tetrachloride

The preparation of SiO₂-TiO₂ thin films by the sol-gel method using silicic acid and titanium tetrachloride as starting materials was studied. The homogeneous sols were obtained by the condensation reaction of silicic acid with titanium tetrachloride in methanol-tetrahydrofuran. The dipcoating of slide glasses and silicon wafers followed by heat treatment gave oxide thin films of 88–93% transmittance, 3000–4500 Å thickness, and 1.45–1.80 refractive index, depending on heat-treatment temperature and TiO₂ content. FT-IR measurement showed that the Si-O-Ti bond is formed even in the sol and films. The variations of film thickness and refractive index on transformation from the gels into the oxides were found to be quite low.     

Kinetics of anation of chromium(III) by L-phenylalanine

Summary The kinetics of anation of chromium(III) species, [Cr(H₂O)₆]⁴⁺ and [Cr(H₂O)₅OH]²⁺, by L-phenylalanine in aqueous acid has been studied spectrophotometrically. Effects of varying [substrate], [ligand], [H⁺], , % ethanol and temperature were investigated. The kinetic data suggest a mechanism where outersphere-associations [between chromium(III) species and phenylalanine in the zwitterionic form] precede anation. Comparison of the results with published data suggest an I_a path for the [Cr(H₂O)₆]³⁺ reaction and I_d path for the [Cr(H₂O)₅OH]²⁺ reaction.     

Cyclic Conjugation Energy Effects in Polycyclic π-Electron Systems

Summary. The fact that cyclic arrangements of double bonds have a dramatic effect on the behavior of conjugated organic molecules is known since the 19th century. The fact that in monocyclic conjugated systems the size of the cycle and the number of -electrons involved is decisive for their stability (aromaticity) or lack of stability (antiaromaticity) is known since the 1930s. In polycyclic -electron systems several cyclic effects are present simultaneously and their separation became possible only recently. A molecular orbital method has been elaborated, by means of which the energy effects of individual cycles in polycyclic -electron systems can be estimated. This method is briefly outlined and illustrated by pertinent examples. An exhaustive bibliography of the topic considered is given.     

Surface thermodynamic functions of dilute solutions of methylcyclohexanols in ethylene glycol

Surface thermodynamic functions (surface entropy, surface enthalpy, and surface composition) of dilute solutions of 2-, 3-, and 4-methylcyclohexanol in ethylene glycol were obtained using surface tension measurements at various temperatures. Surface excess values and surface mole fractions were obtained from Gibbs equation and extended Langmuir model respectively. The results show that all methylcyclohexanols are surface active in ethylene glycol. The lyophobicity of solutes decreases with increasing temperature. The presence of a maximum point in the surface entropy diagram in all systems is explained by the formation of clathrate-like solvates at the surface of these systems.     

Solubilization and applications of single-walled carbon nanotubes into aqueous and organic media by the use of nanometer size-controlled fluoroalkyl end-capped oligomeric aggregates

We have studied on the solubilization of single-walled carbon nanotubes (SW-CNTs) into aqueous and organic media by the use of a variety of nanometer size-controlled fluorinated self-assemblies, which were formed by the aggregations of end-capped fluoroalkyl segments in fluoroalkyl end-capped acrylic acid oligomers [R_F-(ACA)_n-R_F], N,N-dimethylacrylamide oligomers [R_F-(DMAA)_n-R_F], acryloylmorpholine oligomers [R_F-(ACMO)_n-R_F], and N-(1,1-dimethyl-3-oxobutyl)acrylamide oligomers [R_F-(DOBAA)_n-R_F]. Fluorinated self assemblies formed in organic media (colorless solutions) could solubilize SW-CNTs into organic media to afford the transparent pale yellow solutions. The dynamic light scattering measurements showed that the size of fluorinated self-assemblies increased after the solubilization of SW-CNTs into organic media. It was suggested that the solubilization of SW-CNTs into organic media is due to the encapsulation of SW-CNTs into fluorinated assemblies. Fluorinated assemblies were also able to solubilize SW-CNTs into water to give the transparent gray solutions. Among a variety of fluorinated assemblies, fluorinated assemblies formed by R_F-(ACMO)_n-R_F [R_F = CF(CF₃)OC₆F₁₃] oligomer was more effective for the solubilization of SW-CNTs into both aqueous and organic media. Contact angle measurements of dodecane and the fluorescence spectra for poly(methyl methacrylate) cast film modified by fluorinated self-assemblies—SW-CNTs complexes showed that SW-CNTs are dispersed above the PMMA surface.     

Effect of HF addition on the microwave-assisted acid-digestion for the determination of metals in coal by inductively coupled plasma-atomic emission spectrometry

The microwave-assisted acid-digestion for the determination of metals in coal by ICP-AES was investigated, especially focusing on the necessity of adding HF. By testing five certified reference materials, BCR-180, BCR-040, NIST-1632b, NIST-1632c, and SARM-20, it was found that the two-stage digestion without HF (HNO₃ + H₂O₂ was used) was very effective for the pretreatment of ICP-AES measurement. Both major metals (Al, Ca, Fe, and Mg) and minor or trace metals (Co, Cr, Cu, Mn, Ni, Pb, and Zn) in coal gave good recoveries for their certified or reference values. The possibility of ‘HF-memory effect’ was cancelled by the use of a set of vessels which had been never contacted with HF. Twenty-four Japanese standard coals (SS coals) were analyzed by the present method, and the concentrations of major metals measured by the present method provided very high accordance with those from the authentic JIS (Japanese Industrial Standard) method.     

Comparative study of azobenzene and stilbene bridged crown ether p-tert-butylcalix[4]arene

Photo-switchable calixarenes consisting of a stilbene or azobenzene bridge, spanning the narrow rim as a switching unit, were synthesized through reductive coupling of o-, m- and p-bis-benzaldehyde and bis-nitrobenzene-substituted calix[4]arenes. Both cis- and trans-stilbenes were produced from the reductive coupling of the o- and m-bis-benzaldehyde with the cis isomer being predominant for both regioisomers, whilst the coupling of p-bis-benzaldehyde gave only cis product. On the other hand, the only isolable product obtained from the reductive coupling of bis-o- and bis-m-nitrobenzene was the corresponding trans-azobenzene and the coupling product from bis-p-nitrobenzene was not stable. Each of the synthesized compounds showed a photostationary state in their cis-trans isomerization. The complexation of alkali metal ions was observed for only the o-azobenzene derivative suggesting that the lone pair of N-atom in the azo bridge participates in this process.