Modeling of phase equilibrium and vapor adsorption on carbon black based on a combination of a lattice theory and equation of state

A thermodynamic approach is developed in this paper to describe the behavior of a subcritical fluid in the neighborhood of vapor-liquid interface and close to a graphite surface. The fluid is modeled as a system of parallel molecular layers. The Helmholtz free energy of the fluid is expressed as the sum of the intrinsic Helmholtz free energies of separate layers and the potential energy of their mutual interactions calculated by the 10-4 potential. This Helmholtz free energy is described by an equation of state (such as the Bender or Peng-Robinson equation), which allows us a convenient means to obtain the intrinsic Helmholtz free energy of each molecular layer as a function of its two-dimensional density. All molecular layers of the bulk fluid are in mechanical equilibrium corresponding to the minimum of the total potential energy. In the case of adsorption the external potential exerted by the graphite layers is added to the free energy. The state of the interface zone between the liquid and the vapor phases or the state of the adsorbed phase is determined by the minimum of the grand potential. In the case of phase equilibrium the approach leads to the distribution of density and pressure over the transition zone. The interrelation between the collision diameter and the potential well depth was determined by the surface tension. It was shown that the distance between neighboring molecular layers substantially changes in the vapor-liquid transition zone and in the adsorbed phase with loading. The approach is considered in this paper for the case of adsorption of argon and nitrogen on carbon black. In both cases an excellent agreement with the experimental data was achieved without additional assumptions and fitting parameters, except for the fluid-solid potential well depth. The approach has far-reaching consequences and can be readily extended to the model of adsorption in slit pores of carbonaceous materials and to the analysis of multicomponent adsorption systems.     

The crystal structure of tetrakis[trimethylthiomethyl-platinum(IV)], [Pt(CH3)3(SCH3)4

The crystal structure of trimethyl(thiomethyl)platmum(IV), [Pt(CH₃)₃(SCH₃)]₄, has been determined using X-ray diffraction. The compound has three independent but isostructural tetrameric units in the asymmetric unit. The four metal atoms in each tetramer are linked by bridging thiomethyl sulphurs, with three methyl groups completing the octahedral coordination around each platinum. Mean interatomic distances within the tetramer are PtS, 2.48(2), PtC, 2.00(4), PtPt, 3.80(2) Å, with a mean bridge angle SPtS, 79.1(7)°.     

Sequence distribution and intramolecular excimer formation in styrene-acrylonitrile copolymers

Styrene-acrylonitrile copolymers, like many other copolymers containing styrene, exhibit both normal and excimer fluorescence. We have shown that the ratio of the excimer to monomer fluorescence intensities in random styrene-acrylonitrile copolymers is linearly dependent upon the concentration of styrene-styrene bonds in the copolymer. This observation is consistent with a photophysical model which allows the energy absorbed by styrene units to migrate freely along the copolymer chain. Some of the energy is emitted in the form of normal fluorescence; some of the energy, trapped by neighbouring styrene-styrene pairs suitably oriented to allow excimer formation, is emitted as excimer fluorescence. The fluorescence characteristics of acrylonitrile-styrene copolymers are contrasted with those of methyl methacrylate-styrene copolymers, in which the methylmethacrylate sequences are believed to present partial barriers to energy migration along the copolymer chains.     

Determination of Pesticide Ethion by Linear Sweep Stripping Voltammetry

IntroductionOrganophosphorus pesticides( OPPs) are widelyused in agriculture as insecticides, but they are foundto contaminate agricultural products such as fruits andvegetables to variable extents. Because of their toxicproperties[1,2]and the potential r…     

Using a non-invasive stable isotope tracer to measure the absorption of water in humans

The development of solutions that prevent dehydration or promote adequate re-hydration play a vital role in preventing fatigue during exercise, however, the methods commonly used to assess the hydration ability of such solutions are invasive and often assess the components of absorption separately. This paper describes using a non-invasive deuterium tracer technique that assesses gastric emptying and intestinal absorption simultaneously to evaluate the uptake of water during rest and exercise. The kinetics of absorption are further examined by mathematical modelling of the data generated. For the rest group, 0.05 g/kg of body weight of deuterium, contained in gelatine capsules, was ingested with ordinary tap water and saliva samples were collected every 5 min for one hour while the subject remained seated. The deuterium was administered as above for the exercise group but sample collection was during one hour of exercise on a treadmill at 55% of the subject's maximum heart rate. The enrichment data for each subject were mathematically modelled and the parameters obtained were compared across groups using an independent samples t-test. Compared with the rest condition, the exercise group showed delayed absorption of water as indicated by significant differences for the modelling parameters t2, t1/2, maximum absorption rate and solution absorption amount at t1. Labelling with a deuterium tracer is a good measure of the relative rate ingested fluids are absorbed by the body. Mathematical modelling of the data generates rates of maximum absorption and allows calculation of the percentage of the solution that is absorbed at any given time during the testing period.     

Structures of lanthanide shift reagent complexes by molecular mechanics computations

Molecular mechanics calculations have been applied to the structure determination of 7-coordinate lanthanide complexes. To circumvent problems in defining oxygen—lanthanide—oxygen bond angles, the energy of angle deformations at the metal center are not evaluated explicitly. Instead the standard approach to molecular mechanics calculations is modified by including 1,3-nonbonded interactions between atoms that are both bonded to the metal center. Geometry optimization for two known lanthanide complexes afforded structures that are in reasonable agreement with X-ray crystal structures, and small discrepancies are attributed to cyrstal packing forces.     

Near-infrared spectroscopy of torbernites and metatorbernites

A suite of torbernites and metatorbernites have been analysed by near-infrared spectroscopy. The spectra of torbernites and metatorbernites in the first HOH fundamental overtone are different and the spectra of torbernites of different origins in the 6000-7500 cm(-1) region vary. NIR spectroscopy provides a method of studying the hydration of cations in the interlayer of torbernite. NIR spectroscopy shows that the spectra of torbernites from different origins in the water HOH first fundamental overtone and combination regions are different. This difference implies the hydration of cations is different for torbernite minerals. The structural arrangement of the water molecules in the interlayer is sample dependent. The NIR spectra of metatorbernites are different from that of torbernites and a similarity of the spectra of metatorbernites suggests that the water structure in metatorbernites is similar.     

Diphenyltin(IV) complexes of the 2-quinolinecarboxaldehyde Schiff bases of S-methyl- and S-benzyldithiocarbazate (Hqaldsme and Hqaldsbz): X-ray crystal structures of Hqaldsme and two conformers of its diphenyltin(IV) complex

New organometallic tin(IV) complexes of the empirical formula Sn(NNS)Ph₂Cl (NNS = anionic forms of the 2-quinolinecarboxaldehyde Schiff bases of S-methyl- and S-benzyldithiocarbazate) have been prepared and characterized by IR, electronic, ¹H NMR and ES mass spectroscopic techniques. The molecular structures of the 2-quinolinecarboxaldehyde Schiff base of S-methyldithiocarbazate (Hqaldsme) and its diphenyltin(IV) complex, Sn(qaldsme)Ph₂Cl, have been determined by X-ray diffraction. In the solid state, the ligand remains as the thione tautomer in which the dithiocarbazate chain adopts an E,E configuration and is almost coplanar with the quinoline ring. The Sn(qaldsme)Ph₂Cl complex crystallizes in two distinctly different conformationally isomeric forms, each having the same space group but different lattice parameters. X-ray analysis shows that in each polymorph, the tin atom adopts a distorted octahedral geometry with the Schiff base coordinated to it as a uninegatively charged tridentate chelating agent via the quinoline nitrogen atom, the azomethine nitrogen atom and the thiolate sulfur atom. The two phenyl groups occupy axial positions and the chloride ligand occupies the sixth coordination position of the tin atom. The deprotonated ligand adopts an E,E,Z configuration in the complex.     

Thermal and mechanical properties of radiation crosslinked poly(tetrafluoroethylene-co-perfluoromethyl vinyl ether)

The effect of irradiation temperature on the polymer properties was investigated for the fluoroelastomer poly(tetrafluoroethylene-co-perfluoromethylvinyl ether) (TFE/PMVE). TFE/PMVE samples were γ-irradiated to 150 kGy at temperatures ranging from 77 K to 373 K. Analysis of the sol/gel behaviour, tensile properties, and glass transition temperatures indicated that crosslinking commenced in the temperature range 195 to 263 K, for a dose of 150 kGy. The latter temperature was 13 K below the glass transition temperature. Crosslinking remained relatively constant to higher temperatures. Chain scission reactions were found to occur well below the glass transition temperature and increased at higher temperatures. The optimum temperature for the radiation crosslinking of TFE/PMVE, for the temperatures investigated, was 263 K.     

Immobilisation of electroactive macrocyclic complexes within titania films

The 4-carboxyphenyl-appended macrocyclic ligand trans-6,13-dimethyl-6-((4-carboxybenzyl)amino)-1,4,8,11-tetraazacyclotetradecane-6-amine (HL10) has been synthesised and complexed with Co(III). The mononuclear complexes [Co(HL10)(CN)]2+ and [CoL10(OH)]+ have been prepared and the crystal structures of their perchlorate salts are presented, where the ligand is bound in a pentadentate mode in each case while the 4-carboxybenzyl-substituted pendent amine remains free from the metal. The cyano-bridged dinuclear complex [CoL10-mu-NC-Fe(CN)5]2- was also prepared and chemisorbed on titania-coated ITO conducting glass. The adsorbed complex is electrochemically active and cyclic voltammetry of the modified ITO working electrode in both water and MeCN solution was undertaken with simultaneous optical spectroscopy. This experiment demonstrates that reversible electrochemical oxidation of the Fe(II) centre is coupled with rapid changes in the optical absorbance of the film.