The extraction of mercury(II), silver(I), cobalt(II) and cadmium(II) by dioctylarsinic acid in chloroform

Dioctylarsinic acid (HDOAA) in chloroform solution has been investigated as a reagent for the extraction of Hg(II), Ag(I), Co(II), and Cd(II). Silver, cobalt and cadmium are not extracted below pH 7. An extraction coefficient of 1.1, constant over the pH range 1–6.5, was observed for Hg(II). With HCl concentrations of 1–8 M the extractability of mercury decreased slowly, reaching E_a⁰ = 0.05 at 8 M HCl. Silver formed a silver dioctylarsinate precipitate which collected at the interface. The extraction coefficients for Hg(II), Co(II) and Cd(II) increased above pH 7 to values of 20 (pH 9.1), 30 (pH 8.0), and 23 (pH 10), respectively. Reagent- and pH-dependence studies indicated that Co(II) and Cd(II) are extracted as M(DOAA)₂ or M(DOAA)Cl through interaction of HDOAA with M(OH)₂ or M(OH)⁺. Mercury was extracted from solutions of pH 1–6.5 as HgCl₂ (HDOAA)_2.5.     

Vibrational analyses of silacyclopentanes

The complete infrared and Raman spectra of 1,1-difluoro-1-silacyclopentane and 1,1-dichloro-1-silacyclopentane have been recorded and analyzed. Furthermore, a number of the vibrational frequencies of the silacyclopentane and silacyclopentane-1, 1-d₂ molecules have been reassigned.A normal coordinate calculation for each of these molecules was carried out and this demonstrated the validity of the assignments. Considerable mixing of the modes was found especially where ring vibrations and SiX₂ motions were involved.     

THE MECHANISM OF ENERGY TRANSFER FROM POLY-p-BENZOYLPHENYLACETIMIDO-BOVINE SERUM ALBUMIN TO SMALL-MOLECULE QUENCHERS

Abstract— Results of a quantitative photochemical study of poly- p -benzoylphenylacetimido-bovine serum albumin in the presence of small-molecule triplet quenchers are reported. The efficiency of quenching by organic salts containing low triplet energy chromophores is shown to be qualitatively dependent on their predicted association constants to the modified protein. In addition, quenching is inhibited by salts of organic acids which possess high binding affinities for the protein but do not contain chromophores of low triplet energy. Quantitative treatment of the quenching and inhibition data yields results which strongly support the operation of an 'affinity controlled' mechanism for triplet energy transfer from the benzophenone moieties of the modified-bovine serum albumin to quenchers such as α-naphthylacetate and trans -cinnamate.     

Concerning the solution set ofAx=b whereP≦A≦Q andp≦b≦q

Summary LetPQ ben×n real matrices so that ifPAQ for some matrixA, thenA is nonsingular. Letp andq ben-dimensional real column vectors. This paper determines the set of all solutionsx to the equationAx=b for allA andb so thatPAQ andpbq.     

Fracture mechanisms in rigid core-shell particle modified high performance epoxies

The fracture mechanisms of a high performance epoxy system modified with two types of preformed rigid core-shell particles (RCSP) were investigated. The use of the preformed RCSP anables the control of the dispersion of the toughener phase in the epoxy, which, in turn, allows the mechanical properties of the modified epoxy to be optimized. The toughening effect via the RCSP modification is found to be as good as that via the core-shell rubber modification. The moduli andT _g of these RCSP-modified epoxies are virtually unaltered via the RCSP modification, when compared with the neat epoxy resin equivalent. The toughening mechanisms in these toughened systems appear to be predominantly crack deflection, crack bifurcation, and microcracking. Approaches for effective toughening of high performance polymers via rigid polymers are discussed.     

Modeling the active sites in metalloenzymes. 3. Density functional calculations on models for [Fe]-hydrogenase: structures and vibrational frequencies of the observed redox forms and the reaction mechanism at the Diiron Active Center.

Optimized structures for the redox species of the diiron active site in [Fe]-hydrogenase as observed by FTIR and for species in the catalytic cycle for the reversible H(2) oxidation have been determined by density-functional calculations on the active site model, [(L)(CO)(CN)Fe(mu-PDT)(mu-CO)Fe(CO)(CN)(L')](q)(L = H(2)O, CO, H(2), H(-); PDT = SCH(2)CH(2)CH(2)S, L' = CH(3)S(-), CH(3)SH; q = 0, 1-, 2-, 3-). Analytical DFT frequencies on model complexes (mu-PDT)Fe(2)(CO)(6) and [(mu-PDT)Fe(2)(CO)(4)(CN)(2)](2)(-) are used to calibrate the calculated CN(-) and CO frequencies against the measured FTIR bands in these model compounds. By comparing the predicted CN(-) and CO frequencies from DFT frequency calculations on the active site model with the observed bands of D. vulgaris [Fe]-hydrogenase under various conditions, the oxidation states and structures for the diiron active site are proposed. The fully oxidized, EPR-silent form is an Fe(II)-Fe(II) species. Coordination of H(2)O to the empty site in the enzyme's diiron active center results in an oxidized inactive form (H(2)O)Fe(II)-Fe(II). The calculations show that reduction of this inactive form releases the H(2)O to provide an open coordination site for H(2). The partially oxidized active state, which has an S = (1)/(2) EPR signal, is an Fe(I)-Fe(II) species. Fe(I)-Fe(I) species with and without bridging CO account for the fully reduced, EPR-silent state. For this fully reduced state, the species without the bridging CO is slightly more stable than the structure with the bridging CO. The correlation coefficient between the predicted CN(-) and CO frequencies for the proposed model species and the measured CN(-) and CO frequencies in the enzyme is 0.964. The proposed species are also consistent with the EPR, ENDOR, and M?ssbauer spectroscopies for the enzyme states. Our results preclude the presence of Fe(III)-Fe(II) or Fe(III)-Fe(III) states among those observed by FTIR. A proposed reaction mechanism (catalytic cycle) based on the DFT calculations shows that heterolytic cleavage of H(2) can occur from (eta(2)-H(2))Fe(II)-Fe(II) via a proton transfer to "spectator" ligands. Proton transfer to a CN(-) ligand is thermodynamically favored but kinetically unfavorable over proton transfer to the bridging S of the PDT. Proton migration from a metal hydride to a base (S, CN, or basic protein site) results in a two-electron reduction at the metals and explains in part the active site's dimetal requirement and ligand framework which supports low-oxidation-state metals. The calculations also suggest that species with a protonated Fe-Fe bond could be involved if the protein could accommodate such species.     

Comparison of nondestructive proton and neutron activation: The case of biological samples

The capabilities of reactor neutron and 12 MeV proton activation were evaluted on samples of orchard leaves, beef liver and bovine liver. Based on γ-ray spectrometry, As, Ca, Cu, Fe, Mo, Pb, Sr, Ti, Zn and Zr at levels ranging from 2 to 20 900 ppm were detected following proton activation of 1 hour. Al, Br, Ca, Cl, Cu, Mg, Mn, Rb and V (ranging from 0.4 to 20 900 ppm) were measured by neutron activation (1 min irradiation). As, Ba, Br, Cr, Co, Fe, Hg, La, Na, Rb, Sb and Zn (ranging from 0.2 to 2400 ppm) were determined following a 14 h neutron irradiation. Although covering different elements, the two techniques are comparable in their scope, i. e. detection limits that can be achieved and number of elements that can be detected simultaneously.     

Molecular recognition and host-guest interactions in complexes of O-bistren,C-bistren,and bisdien

The host-guest relationships of the complexes of the cryptand ligands O-BISTREN and C-BISTREN, and of the analogous macrocyclic ligand BISDIEN are compared. The affinities of their binuclear copper(II) complexes for the bridging ligands (OH^–, F^–) as cascade type guests (i.e., guests of guests) are reported. The ability of the dicobalt(II)-BISDIEN complex to coordinate dioxygen and an additional bifunctional guest simultaneously, leads to the possibility of a new type of catalysis occurring within the cavity of a macrocyclic complex.     

Synthesis, Characterization, Luminescence, and Electrochemistry of New Tetranuclear Gold(I) Amidinate Clusters: Au4[PhNC(Ph)NPh]4, Au4[PhNC(CH3)NPh]4, and Au4[ArNC(H)NAr]4

The syntheses and the X-ray structures of the tetranuclear gold(I) benzamidinate, Au₄[PhNC(Ph)NPh]₄, and the tetranuclear gold(I) acetamidinate, Au₄[PhNC(CH₃)NPh]₄, clusters are reported. The clusters are produced by the reaction of the sodium salt of an amidine ligand with the gold precursor Au(THT)Cl in a (1:1) stoichiometry. The average Au...Au distance between adjacent Au(I) atoms is ∼2.9 ?, typical of compounds having an aurophilic interaction. The four gold atoms are arranged in a square (Au...Au...Au... = 88–91°) in the acetamidinate and in a distorted square (Au...Au...Au... = 82–97°) in the benzamidinate derivative. Electrochemical oxidation of the tetranuclear complex Au₄[PhNC(Ph)NPh]₄ show three reversible waves at 0.87, 1.19, 1.42 V vs. Ag/AgCl at a scan rate of 100 mV/s in CH₂Cl₂ similar to the three reversible waves seen before from the tetranuclear complexes Au₄[ArNC(H)NAr]₄, Ar = C₆H₄-4-OMe, Ar = C₆H₄-4-Me, and Ar = C₆H₃-3,5-Cl. A summary of the chemistry of the tetranuclear Au(I) amidinate complexes Au₄[ArNC(H)NAr]₄, Ar = C₆H₄-4-OMe, C₆H₃-3,5-Cl, C₆H₄-4-Me, C₆H₄-3-CF₃, C₆F₅, C₁₀H₇ also is presented. The tetranuclear clusters Au₄[ArNC(H)NAr]₄, Ar = C₆H₄-4-OMe, Ar = C₆H₄-3-CF₃, Ar = C₆H₄-4-Me and Ar = C₆H₄-3,5-Cl are the first tetranuclear gold(I) cluster species from group 11 elements to show fluorescence at room temperature. The lifetimes of the naphthyl and trifluoromethylphenyl complexes are in the millisecond range indicating phosphorescent processes. Recently it has been shown that Au₄[ArNC(H)NAr]₄ are very effective catalysts upon calcination for room temperature CO oxidation. Congratulations to Dieter Fenske, a superb synthetic chemist with exceptional talents in cluster chemistry, on the occasion of his 65th birthday.