Supramolecular isomers in the same crystal: a new type of entanglement involving ribbons of rings and 2D (4,4) networks polycatenated in a 3D architecture

The reaction of corresponding cadmium salts with the flexible ligand 1,4-bis(1,2,4-triazol-1-ylmethyl)benzene (bbtz) affords the 3D coordination network [Cd3(bbtz)6(H2O)6](BF4)(6.1.75H2O (1), containing ribbons of rings and planar 2D (4,4) networks polycatenated with each other, the undulating 2D (4,4) network [Cd(bbtz)2(H2O)2](ClO4)2.2H2O (2), and ribbons of rings [Cd(bbtz)2(H2O)2](BF4)2.3DMF (3) and [Cd(bbtz)2(H2O)2](ClO4)2.3DMF (4).     

聚丁二炴的能量和能带结构计算

本文采用LCAO_SCF ab initio晶体轨道方法计算了聚丁二炔的两种可能结构: 乙炔型结构C(R—C≡C—CR′)和丁三烯型结构(_nCR=C=CR′)_n的能量和能带结构; 讨论了不同侧链基团聚丁二炔的两种结构的能量稳定性及其能带结构的变化; 并从侧链基团的性质及这两种结构的差别进行了分析, 较好地解释了计算结果。     

Study on multimers and their structures in molecular association mixture

Self-association system of(R)-1,3-butanediol in dilute carbon tetrachloride(CCl4)solution is studied as a model of molecular association mixture.Analysis methods including FSMWEFA(fixed-size moving window evolving factor analysis)combined with PCA(principal component analysis),SIMPLISMA (simple-to-use interactive self-modeling mixture analysis),and ITTFA(iterative target transformation factor analysis)are adopted to resolve infrared spectra of(R)-1,3-butanediol solution.Association number and equilibrium constant are computed.(R)-1,3-butanediol in dilute inert solution is determined as a monomer-trimer equilibrium system.Theoretical investigation of trimer structures is carried out with DFT(density functional theory),and structural factors are analyzed.     

Single polymer molecules adsorbed to mica and the oppositely charged polymer/surfactant complexes formed at the air–water interface visualized by atomic force microscopy

In the present study, the structure and morphology of single sodium poly(styrenesulfonate) (PSS) molecules adsorbed to mica surface from the natural aqueous solution is investigated using atomic force microscopy technique. Results show that single PSS molecules are observed which show a morphology of wormlike coils. Meanwhile, single sodium poly(styrenesulfonate) (PSS)/Hexadecyltrimethylammonium bromide (CTAB) complexes deposited on mica from the air–water interface are also observed. However, the PSS/CTA⁺ complexes show different conformations by appearing in the morphology of circular patches. Experimental data are in fair agreement with the theoretical analysis.     

Growth control of homogeneous pulsed electrodeposited Co thin films on n-doped Si(1 1 1) substrates

Cobalt thin films were deposited by pulsed electrodeposition on n-doped silicon substrates. We show that the morphology and the magnetic properties of the samples can be controlled by a careful choice of the deposition conditions. Atomic force microscopy measurements reveal a granular growth with grain size and homogeneity strongly dependent on the total deposition time and pulse frequency of the applied signal. Magnetic force microscopy and magnetization measurements indicate the formation of magnetically correlated grain systems with a maximum magnetic correlation and homogeneity for samples with grain diameters of about 40 nm.     

Construction of polymeric and oligomeric lanthanide(III) thiolates from preformed complexes [(TMS)2N]3Ln(mu-Cl)Li(THF)3 (Ln = Pr, Nd, Sm; (TMS)2N = Bis(trimethylsilyl)amide)

The complex [{(TMS)2N}4(mu4-Cl)Sm4(mu-SPh)4(mu3-Cl)Li(THF)] has been formed by protonolysis of [(Me3Si)2N]3Sm(mu-Cl)Li(THF)3 with 1 equiv of HSPh, which contains a square array of Sm(III) ions connected by a central mu4-Cl ligand. The edges of the square Sm4 array are bridged by four mu3-Cl and four mu-SPh ligands. The four Sm atoms and Li atom are connected by four mu3-Cl ligands.     

Electrochemical properties of Li(Li(1−x)/3CoxMn(2−2x)/3)O2 (0 ⩽ x ⩽ 1) solid solutions prepared by poly-vinyl alcohol (PVA) method

The whole range of solid solutions Li(Li_(1−x)/3Co_xMn_(2−2x)/3)O₂ (0 ⩽ x ⩽ 1) was firstly synthesized by an aqueous solution method using poly-vinyl alcohol as a synthetic agent to investigate their structure and electrochemical properties. X-ray diffraction results indicated that the synthesized solid solutions showed a single phase without any detectable impurity phase and have a hexagonal structure with some additional peaks caused by monoclinic distortion, especially in the solid solutions with a low Co amount. In the electrochemical examination, the solid solutions in the range between 0.2 ⩽ x ⩽ 0.9 showed higher discharge capacity and better cyclability than LiCoO₂ (x = 1) on cycling between 2.0 and 4.6 V with 100 mA g⁻¹ at 25 °C. For example, Li(Li_0.2Co_0.4Mn_0.4)O₂ (x = 0.4) exhibited a high discharge capacity of 180 mA h g⁻¹ at the 50th cycle. By synthesizing the solid solution between Li₂MnO₃ and LiCoO₂, the electrochemical properties of the end members were improved.     

Construction of a Novel 2D Polymer [Co（dmpzm）（dca）2]∞ from Reaction of a Mononuclear Complex [Co（dmpzm）Cl2] with Sodium Dicyanamide （dca） [dmpzm=bis（3,5-dimethylpyrazolyl）methane]

Reaction of COC12.6H20 with equimolar bis（3,5-dimethylpyrazolyl）methane （dmpzm） produced a mononuclear adduct [Co（dmpzm）Cl2] （1）. Treatment of 1 with sodium dicyanamide （dca） afforded a polymeric complex [Co（dmpzm）（μ-dca）2]∞ （2）. 1 and 2 were characterized by elemental analysis, IR spectra, thermogravimetric analysis and single-crystal X-ray diffraction. The cobalt atom in 1 adopts a distorted tetrahedral coordination geometry, bound to two N atoms of one dmpzm and two Cl atoms. Complex 2 has a 2D brick-wall network （extended along the bc plane） in which the { [Co（dmpzm）（μ-dca）]2} n^2n＋ chains are interconnected by pairs of μ-dca anions along the c axis. The magnetic properties of 1 and 2 were also investigated.     

Hydrogenation of nitrobenzenes catalyzed by platinum nanoparticle core-polyaryl ether trisacetic acid ammonium chloride dendrimer shell nanocomposite

Platinum nanoparticle core-polyaryl ether trisacetic acid ammonium chloride dendrimer shell nanocomposites (Pt@G_n-NACl) were prepared and used as catalysts for hydrogenation of nitrobenzenes to anilines with molecular hydrogen under mild conditions. The as-prepared nanoparticles have mean particle size from 2.0 to 5.5 nm, depending on the molar ratio of the metal and the dendrimer. The Pt nanoparticles demonstrate near-monodisperse when the molar ratio of Pt and G₃-NACl is below 30. The interaction among three carboxyl groups terminated at the dendron and the metallic core keeps the Pt nanoparticles from agglomerating. The colloidal solution of Pt nanoparticles stabilized by the dendrimer, in which the molar ratio of Pt/G₃-NACl was less than 60, is stable without precipitation for several weeks. The dendrons attach to the metal core radially, and a substantial fraction of the surface of the metal nanoparticle is unpassivated and available for catalytic reactions. Turnover frequencies for the hydrogenation of nitrobenzenes to anilines change from 353 to 49 h⁻¹ depending on the dendrimer generation and substrates. The dendrimer catalysts are stable during the catalytic hydrogenation process and can be recovered by centrifugation and reused. The results suggest the effectiveness of polyaryl ether trisacetic acid ammonium chloride dendrimer as a stabilizer for the preparation of Pt nanoparticle catalysts.     

二硫化钼基复合材料的合成及光催化降解与产氢特性

随着环境污染和能源短缺的加剧,无污染环境修复技术及清洁能源替代工程已成为一项重要而紧迫的任务。作为层状结构的过渡金属硫化物,二硫化钼带隙较窄,边缘具有高的反应活性,容易与其他物质形成复合结构,是近年来光催化环境修复及清洁能源领域的研究热点。本文详细介绍了半导体二硫化钼及其复合物的合成方法和光催化降解与产氢行为,重点阐述了二硫化钼及其复合物的具体复合方式、光催化降解污染物活性、光催化产氢活性以及具体的降解与产氢机理等方面的内容,并举例说明。二硫化钼及其复合物在光催化降解污染物和光催化产氢方面具有绿色、廉价、高效等优点,在环境修复及清洁能源领域具有巨大的潜力和应用发展前景。