一锅法可控合成金属有机框架材料Mn-荧光素用于核磁共振/荧光成像

通过一锅法,首次将核磁共振成像试剂Mn²⁺和荧光成像试剂荧光素（FSD）自组装于一个简单的金属有机框架材料（Mn-FSD）上。实验结果表明,Mn-FSD的粒径可被控制在微纳米水平内并进行生物成像。体外和体内实验结果证实,Mn-FSD可在细胞和裸鼠中显示强绿色荧光。同时,Mn-FSD表现出较高的弛豫值（r₁=4.95 L·mmol^-1·s^-1）。     

Rashba效应对量子线中束缚磁极化子性质的影响

采用改进的线性组合算符和幺正变换相结合的方法研究了Rashba效应对抛物量子线中强耦合束缚磁极化子性质的影响.计算了抛物量子线中强耦合束缚磁极化子的有效质量和振动频率,对Rb Cl材料的数值计算结果表明:量子线中强耦合束缚磁极化子的振动频率随受限强度和回旋频率的增加而增大;有效质量与磁极化子的受限强度、回旋频率和电子面密度有关,在Rashba效应影响下有效质量随上述各量的变化曲线都发生了分裂.     

基于网络的风机防喘振控制系统设计

针对某钢厂转炉煤气加压站大风机电机采用工频加变频的恒压闭环运行方式,变频风机极易发生喘振的现象,为了确保大风机稳定、安全的运行,在风机喘振的预防和控制方法上进行改进。采用两台风机同步变频调速与最小极值流量法的模糊PID控制相结合的防喘振控制方法,同步变频调速控制策略有效地预防喘振的发生,最小极值流量法的模糊PID控制策略最大限度的扩大了风机的运行区间,通过MATLAB软件仿真,证明模糊PID的动态响应速度和鲁棒性较常规PID有较大的改良。控制系统通过工业网络完成现场设备和远程的通讯,使控制系统达到高水平的智能自动化。     

Hydrothermal synthesis and structure characterization of two six-connected metal–organic frameworks based on the mixed ligands

Two metal–organic frameworks, namely, [Ni₂(BIMB)₂(ndd)₂·H₂O]_n (1) and [Zn₃(ndd)_2.5(μ₃-OH)(1,3-dpp)]_n (2) (H₂ndd = 2,2′-(naphthalene-1,5-diylbis(oxy))diacetic acid, BIMB = 1,4-bis[(1H-imidazol-1-ly)methyl]benzene, 1,3-dpp = 1,3-di(pyridin-4-yl)propane) have been synthesized under hydrothermal conditions and characterized by single-crystal X-ray diffraction and thermogravimetric analysis. Compound 1 presents a two-dimensional network with point symbol of (3⁶·4⁶·5³)-hxl topology. Moreover, compound 2 displays a novel 2-fold interpenetrated structure with the point symbol of (4¹²·6³)-pcu topology based on the hexanuclear [Zn₆(CO₂)₁₀(N)₄] unit as a six-connected node. Meanwhile, compound 2 shows good fluorescence property in the solid state at room temperature.     

Structural,mechanical, electronic,optical properties and effective masses of CuMO2 (M = Sc,Y, La) compounds: First-principles calculations

The structural, elastic, mechanical, electronic, optical properties and effective masses of CuM_IIIBO₂ (M_IIIB = Sc, Y, La) compounds have been investigated by the plane-wave ultrasoft pseudopotential technique based on the first-principles density-functional theory under local density approximation. The equilibrium structural parameters are in good agreement with previous experimental and theoretical data. To our knowledge, there are no available data of elastic constants for comparison. The bulk, shear and Young's modulus, ratio of B/G, Poisson's ratio and Lamé's constants of CuM_IIIBO₂ have been studied. The electronic structures of CuM_IIIBO₂ are consistent with other calculations. The population analysis, charge densities and effective masses have been shown and analyzed. The imaginary and real parts of the dielectric function, refractive index and extinction coefficient of CuM_IIIBO₂ are calculated. The interband transitions to absorption of CuM_IIIBO₂ have been analyzed.     

超声法合成CePO4纳米线及发光性能研究

用CeO2作为铈源,采用可重复利用的H3PO4及非模板剂的情况下,用低温超声法成功合成了六方结构的CePO4一维纳米线材料。用X-射线粉末衍射(XRD)、透射电镜(TEM)和荧光分光光度计(FL)测试样品的物相结构、微观形貌、颗粒尺寸和发光性能;并研究超声时间和PO3-4/Ce3+摩尔比对产物的形貌和荧光性能的影响。结果表明:实验所做出的样品全部是六方晶系的结构,形貌都为一维纳米线,其纳米线长50~200nm,宽5~40nm左右;不同超声时间和PO3-4/Ce3+摩尔比的纳米线长径比不同,随超声时间的延长和PO3-4/Ce3+摩尔比增大纳米线出现团聚现象,产物在250~300nm处有宽的激发峰,在378nm处有一个发射峰,是属于Ce3+的5d-4f能级跃迁。     

The influence of chemical structure on the antimicrobial activities of thiosemicarbazone-chitosan

We have previously reported the preparation of acetyl and benzoyl phenyl-thiosemicarbazone derivatives of chitosan and their antimicrobial activities. The purpose of this study was to further assess the relationship between chemical structure and antimicrobial activity of chloracetyl phenyl-thiosemicarbazone-chitosan. Ten new chloracetyl phenyl-thiosemicarbazone-chitosans were prepared, and their structures were characterized using FT-IR and elemental analysis. The synthesized compounds were tested against four species of bacteria and four crop-threatening pathogenic fungi. Different molecular weights and concentrations were evaluated. The antifungal activities of the synthesized compounds were related to the positive polarity of the N₄ atom and the distribution of the electron atmosphere in the C=S group. All chitosan compounds had inhibitory effects when tested with bacteria. The minimum MIC and MBC with Escherichia coli were 7.03 and 56.25 μg mL^?1, respectively.     

有机蒙脱土改性脲醛树脂胶黏剂的制备及结构表征

采用"碱-酸-碱"合成工艺,在各阶段将OMMT(有机蒙脱土)投入反应体系,制备有机蒙脱土改性脲醛树脂胶黏剂,测试胶黏剂的各项性能,用XRD(X射线衍射仪)、FTIR(傅里叶变换红外光谱)、SEM(扫描电镜)、TG(热重分析)对改性胶黏剂结构进行表征.实验结果表明,随着OMMT的加入,胶黏剂的游离甲醛含量降低,胶合强度增加.第一阶段投入OMMT,降醛效果明显,第二阶段投入OMMT,补强效果明显.SEM图显示,改性胶黏剂中被剥离成片层状的OMMT因受基体的包覆或挤压,呈现出蜷曲的形状;XRD图谱显示,OMMT/UF胶黏剂的结晶度低于UF胶黏剂的结晶度,有机蒙脱土的加入,破坏了脲醛树脂中羰基和氨基的规整性排列;FTIR图谱表明,改性脲醛树脂胶黏剂中存在大量游离的尿素,胶黏剂的游离甲醛含量低;TG分析得出,改性胶黏剂的TG曲线移向高温方向,材料的热分解温度提高.     

稀土对管线钢中碳化物溶解与析出行为的影响

以X80管线钢为研究对象,研究了稀土对含铌钢奥氏体化与析出行为的影响。利用热力学固溶度积公式,计算了铌碳化物的溶解温度;借助显微组织观察与硬度测试,对比分析了稀土对高温下奥氏体晶粒粗化及不同温度淬火回火后硬度的影响;通过热模拟实验并利用透射电镜,研究了稀土对实验钢在热变形过程中铌碳氮化物析出行为的作用机制。结果表明:稀土元素的加入降低了碳氮化物的固溶温度,促进了Nb(C,N)等第二相粒子的固溶,稀土能够促进热变形过程中Nb(C,N)的析出,从而提高铌元素的析出强化效果。