基于硫化镉纳米团簇标记DNA电化学传感的研究

合成了表面具有自由羧基的硫化镉纳米团簇，以乙基-（3-二甲基丙基）碳二 亚胺盐酸盐为偶联活化剂，将其标记于人工合成的5'端氨基修饰的寡聚核苷酸片段 上，制备成CdS纳米团簇标记DNA探针，该寡聚核苷酸片段与大肠杆菌肠毒素基因相 关。在一定的条件下，使基与固定晨玻碳电极表面的待测DNA序列进行杂交反应， 利用阳极溶出示差脉冲伏安法（ASDPV）间接测定Cd的量，实现对互补、非互补 DNA片段的识别和电化学检测，从而对大肠杆菌肠毒素基因片段识别和检测。     

A concise synthesis of nornitidine via nickel- or palladium-catalyzed annulation

A concise method to synthesize benzo[c]phenanthridine alkaloid, nornitidine, was developed utilizing nickel- or palladium-catalyzed iminoannulation of an internal alkyne. The advantages of this strategy included readily available starting materials, inexpensive reagents, short reaction steps, and good yields.     

Alkylation of benzene with 1-hexene in acidic ionic liquid systems: Et3NHCl-FeCl3and Et3NHCl-AlCl3ionic liquids

Summary The alkylation of benzene with 1-hexene has been investigated in different triethylamine hydrochloride-ferric chloride (Et₃NHCl-FeCl₃) and triethylamine hydrochloride-aluminium chloride (Et₃NHCl-AlCl₃) ionic liquids. Both high catalyst activity and monoalkylation selectivity were observed for these two type of ionic liquids. Systems prepared by modification with HCl in Et₃NHCl-FeCl₃ionic liquids prove to be very suitable solvents and catalysts for the reaction. When employing Et₃NHCl-AlCl₃ionic liquids as catalysts, the reaction takes place in biphasic mode with facile catalyst separation and catalyst recycling.     

Determination of trace scandium by ion-exchanger phase spectrophotometry withp-nitrochlorophosphonazo

Ion-exchanger phase Spectrophotometry withp-nitrochlorophosphonazo (CPApN) has been developed for the determination of scandium. The linear range is 1–8 g of scandium in 50 ml of solution, using 0.8 g of resin, with an apparent molar absorptivity of 2.76 × 10⁵ 1 mol^–1 cm^–1. Aluminum and rare earth elements in reasonable amounts do not interfere. The method has been applied successfully to the determination of scandium in alloys, with relative standard deviations of 2–4%.     

Development of aryl-containing dipyrrolyldiketone difluoroboron complexes (BONEPYs): Tune the hydrogen bond o–CH···F for fluoride recognition

Dipyrrolyldiketone difluoroboron complexes (BONEPYs) were synthesized by condensation of the corresponding pyrroles and malonyl chloride followed by treatment with BF₃·OEt₂. The aryl-substituted pyrrole is introduced to form a cyclic system in order to investigate anion binding studies. In BONEPYs 1–3 the o-H of the aryl group forms hydrogen bonding with F⁻ to give a more table complex. In contrast, the intramolecular hydrogen-bonded BONEPY endo-4 is more stable than its exo isomer. While adding F⁻, the hydrogen bonds must be broken first to give 4·(3)F⁻. Owing to the electron-rich group (-OMe), the o-H of the phenyl group can hardly interact with F⁻ via hydrogen bonding to give the less stable complex 4·(5)F⁻. The energy differences between the different conformations were calculated using DFT methods, which is consistent to the experimental observations.     

Synthesis of Cyanobenzaldehydes （m—,o—,p—）by Molecular oxygen Oxidation Methods

Cyanobenzaldehydes (m-,o-,p-) were synthesized by oxidation of corresponding tolunitriles with molecular oxygen,catalyzed by cobalt acetate and sodium bromide.     

Capillary Electrophoresis of the Active Ingredients of Dioscorea bulbifera L. and its Medicinal Preparations

A method based on capillary electrophoresis with electrochemical detection has been developed for the separation and determination of epicatechin, isovanillic acid, vanillic acid and myricetin in Dioscorea bulbifera L. and its medicinal preparations. The effects of working electrode potential, pH and concentration of running buffer, separation voltage and injection time were investigated. Under optimum conditions, the analytes could be separated in a 40 mmol L^?1 borate buffer (pH 8.7) within 15 min. A 300 μm diameter carbon disk electrode has a good response at + 0.95 V (vs. SCE) for all analytes. The response was linear over three orders of magnitude with detection limits (S/N = 3) ranging from 3.0 × 10^?8 g mL^?1 to 1.0 × 10^?7 g mL^?1. The method has been successfully applied to the analysis of real samples.     

Direct synthesis, characterization of Cu-SBA-15 and its high catalytic activity in hydroxylation of phenol by H2O2

Transition metal copper substituted mesoporous silica (Cu-SBA-15) was synthesized using triblock copolymers surfactant as template agent under acidic condition. The result Cu-SBA-15 was characterized with XRD, ICP-AES, FT-IR and N₂ adsorption–desorption measurements, which prove that Cu(II) was mainly incorporated into the framework of Cu-SBA-15. Its catalytic activity was studied for phenol hydroxylation using H₂O₂ (30%). The substituting element (Cu²⁺) is incorporated into the framework position forming a new type of active site which raises the phenol conversion to 62.4% and the diphenol (the mixture of catechol (CAT) and hydroquinone (HQ)) selectivity to 97%. The Cu-SBA-15 has very high selectivity for catechol (about 71% selectivity), which is completely different from that of the microporous titanium silicalite zeolites (47.1% phenol conversion and about 50% selectivity to CAT under same reaction conditions). The results obtained indicate that the selective oxidation of phenol with H₂O₂ by a radical substitution mechanism.     

Effect of diluting agent on sensitivity in capillary electrophoresis with amperometric detection

Besides the running buffer, pH of buffer, separation voltage and sampling time, the diluting agent was studied in this paper as one of the important factors influencing the sensitivity in capillary electrophoresis (CE) with amperometric detection (AD) when electrokinectic sampling was used. Clonidine hydrochloride, hydrochlorothiazide and rutin, which are positively charged, neutral and negatively charged, respectively, in aqueous solutions, could be perfectly separated by CE with 25 mmol x L(-1) Na(2)B(4)O(7) - 50 mmol x L(-1) NaH(2)PO(4) as running buffer and detected by measuring their current responses with AD. Before CE running, some kinds of diluents including water, methanol, formamide, running buffer, hydrochloric acid and sodium hydroxide were, respectively, applied to dilute the stock solutions of above three analytes and their effects on the sensitivity of CE-AD were investigated. The results showed that for electrokinetic injection, the current responses of these three analytes were greatly affected in different ways when different diluting agents were used. This method was applied to simultaneously determine the active ingredients in one Chinese compound hypotensor named Zhen Ju Jiang Ya Pian, in which the contents of clonidine hydrochloride, hydrochlorothiazide and rutin is very different as 0.03 mg : 5 mg : 20 mg per tablet, and satisfactory results were obtained by adjusting their sensitivity by selecting the suitable diluting agent.     

Determination of sulfur dioxide in vitriol plant wastewater by using a polyNiMe4TAA electrochemically modified Pt microelectrode

A Pt microelectrode modified with nickel(II) polytetramethyldibenzo[b,i]tetraaza[14]annulene was prepared by electropolymerization of nickel(II) tetramethyldibenzo[b,i]tetraaza[14]annulene monomers and applied to determine sulfur dioxide in vitriol plant wastewater. For determination of SO2 with this electrochemically modified Pt microelectrode, the linear range was from 9.6 x 10(-6) to 2.4 x 10(-4) mol L-1, the sensitivity was 1.8 x 10(-4) A L mol-1, the detection limit was calculated to be 4.8 x 10(-6) mol L-1 (S/N = 3), the response time was less than 20 s and the relative standard deviation was found to be 2.1% on analyzing 4.8 x 10(-5) mol L-1 SO2 solution repeatedly (n = 7). These results demonstrated good accuracy compared with those obtained by the conventional iodimetric method.