Nonvolatile photorefractive holographic recording in Sc:Ce:Cu:LiNbO3

In this paper experimental studies of nonvolatile photorefractive holographic recording in Ce:Cu:LiNbO₃ crystals doped with Sc(0,1,2,3 mol%) were carried out. The Sc:Ce:Cu:LiNbO₃ crystals were grown by the Czochralski method and oxidized in Nb₂O₅ powders. The nonvolatile holographic recording in Sc:Ce:Cu:LiNbO₃ crystals was realized by the two-photon fixed method. We found that the recording time of Sc:Ce:Cu:LiNbO₃ crystal became shorter with the increase of Sc doping concentration, especially doping with Sc(3 mol%), which exceeds the so-called threshold, and there was little loss of nonvolatile diffraction efficiencies between Sc(3 mol%):Ce:Cu:LiNbO₃ and Ce:Cu:LiNbO₃ crystals.     

聚芳香杂环甲烯的三阶非线性光学效应与时间分辨光克尔效应

合成了一系列聚芳香杂环甲烯,包括聚吡咯甲烯和聚噻吩甲烯.采用四波混频法研究材料的共振三阶非线性光学效应(λ＝532nm),其共振二阶超分子极化率γ三阶非线性光学系数分别达到10^-30esu和10^-8esu.选择具有良好溶解性、成膜性的聚吡咯对二甲氨基苯甲烯(PPDMAB),采用飞秒时间分辨光克尔效应方法研究材料的非共振三阶非线性光学效应(λ=790nm).实验表明,翠绿亚胺碱溶液的光克尔信号仅表现一超快响应的成分,归功于π电子云扭转产生的非共振激发.PPDMAB的非共振二阶超分子极化率γ三阶非线性光学系数分别达到γ=5.78×10^-32esu和χ⁽³⁾=1.26×10^-10esu.     

Relaxor behavior of (Ba,Sr)(Zr,Ti)O3 ferroelectric ceramics

We examine the ferroelectric-relaxor behavior of (Ba_0.65Sr_0.35)(Zr_0.35Ti_0.65)O₃ (BSZT) ceramics in the temperature range from 80 to 380 K. A broad dielectric maximum, which shifts to higher temperature with increasing frequency, signifies the relaxor-type behavior of these ceramics. The value of the relaxation parameter γ∼2 estimated from the linear fit of the modified Curie-Weiss law, indicates the relaxor nature of the BSZT ceramics. The dielectric relaxation rate follows the Vogel-Fulcher relation with T_VF=107 K, E_a=0.121 eV, and ν₀=6.83×10¹⁴ Hz, further supports such relaxor nature. The slim P-E hysteresis loop and ‘butterfly’ shape dc bias field dependence of permittivity at T>T_m (T_m, the temperature of permittivity maximum) clearly signifies the occurrence of nanopolar clusters, which is the typical characteristic of ferroelectric relaxor. At 300 K and 10 kHz, the dielectric constant and loss tan δ are ∼1100 and 0.0015, respectively. The high tunability (∼25%) and figure of merit (∼130) at room temperature show that the BSZT ceramics could be a promising candidate for tunable capacitor applications.     

Indoor radon measurements in dwellings of four Saudi Arabian cities

An indoor radon survey of a total of 269 dwellings, with one dosimeter per house, distributed in four Saudi Arabian cities was carried out. The objective of this survey was to carry out indoor radon measurements of two cities in the Eastern Province, Khafji and Hafr Al-Batin and to compare this with two cities in the Western Province, Al-Madina and Taif. The survey provides additional information about indoor radon concentrations in Saudi Arabia. The results of the survey in these cities showed that the overall minimum, maximum and average radon concentration were 7,137 and 30 Bqm⁻³, respectively. The lowest average radon concentration (20 Bqm⁻³) was found in Hafr Al-Batin, while the highest average concentration was found in Khafji (40 Bqm⁻³).     

Uniformity in radon exhalation from construction materials using can technique

The uniformity in radon exhalation rates for 46 tiles of granite, marble and ceramic used as construction materials were determined using “Can Technique” employing CR-39 nuclear track detectors (NTDs). On each tile, two sealed cans, each enclosing one NTD fixed at the center of the tile surface area covered by the can, were mounted at two different locations of each individual tiles. The track production rates on the NTDs representing radon exhalation rates were measured. The radon exhalation rates from the surface of individual tiles showed uniform exhalations within the calculated uncertainties of the measured values. This makes Can Technique an alternative simple method to measure radon exhalation rates. Calibration required to convert track production rates into radon exhalation rates for the used can and NTD was done using an active technique. The correlation between the measurements by the two techniques shows a good linear correlation coefficient (0.83).     

Specific heat and related thermophysical properties of liquid Fe-Cu-Mo alloy

The specific heat and related thermophysical properties of liquid Fe77.5Cu13Mo9.5 monotectic alloy were investigated by an electromagnetic levitation drop calorimeter over a wide temperature range from 1482 to 1818 K. A maximum undercooling of 221 K (0.13 Tm) was achieved and the specific heat was determined as 44.71 J·mol-1·K-1. The excess specific heat, enthalpy change, entropy change and Gibbs free energy difference of this alloy were calculated on the basis of experimental results. It was found that the calculated results by traditional estimating methods can only describe the solidification process under low undercooling conditions. Only the experimental results can reflect the reality under high undercooling conditions. Meanwhile, the thermal diffusivity, thermal conductivity, and sound speed were derived from the present experimental results. Furthermore, the solidified microstructural morphology was examined, which consists of (Fe) and (Cu) phases. The calculated interface energy was applied to exploring the correlation between competitive nucleation and solidification microstructure within monotectic alloy.     

An optimal design of collateralized mortgage obligation with PAC-companion structure using dynamic cash reserve

This paper presents a model for optimally designing a collateralized mortgage obligation (CMO) with a planned amortization class (PAC)-companion structure using dynamic cash reserve. In this structure, the mortgage pool’s cash flow is allocated by rule to the two bond classes such that PAC bondholders receive substantial prepayment protection, that protection being provided by the companion bondholders. The structure we propose provides greater protection to the PAC bondholders than current structures during periods of rising interest rates when this class of bondholders faces greater extension risk. We do so by allowing a portion of the cash flow from the collateral to be reserved to meet the PAC’s scheduled cash flow in subsequent periods. The greater protection is provided by the companion bondholders exposure to interest loss. To tackle this problem, we transform the problem of designing the optimal PAC-companion structure into a standard stochastic linear programming problem which can be solved efficiently. Moreover, we present an extended model by considering the quality of the companion bond and by relaxing the PAC bondholder shortfall constraint. Based on numerical experiments through Monte Carlo simulation, we show the utility of the proposed model.     

Exponential decay rate of survival probability in a disastrous random environment

Summary. We study the exponential decay rate of the survival probability up to time t>0 of a random walker moving in Zopf; ^d in a temporally and spatially fluctuating random environment. When the random walker has a speed parameter κ>0, we investigate the influence of κ on the exponential decay rate λ(d,κ). In particular we prove that for any fixed d≥1, λ(d,κ) behaves like as logκ as κ↘0. Received: 21 May 1996 / In revised form: 2 February 1997     

Comment on “smooth and discontinuous signature change in general relativity”

Kossowski and Kriele derived boundary conditions on the metric at a surface of signature change. We point out that their derivation is based not only on certain smoothness assumptions but also on a postulated form of the Einstein field equations. Since there is no canonical form of the field equations at a change of signature, their conclusions are not inescapable. We show here that a weaker formulation is possible, in which less restrictive smoothness assumptions are made, and (a slightly different form of) the Einstein field equations are satisfied. In particular, in this formulation it is possible to have a bounded energy-momentum tensor at a change of signature without satisfying their condition that the extrinsic curvature vanish.