An asymptotic approach to the problem of the free oscillations of a beam

Equations describing the free small longitudinal and transverse oscillations of a straight elastic beam of rectangular cross section are obtained using the plane linear theory of elasticity and the method of integrodifferential relations. The initial system of partial differential equations is reduced to a system of ordinary linear differential equations with constant coefficients. The effect of the geometrical and elastic characteristics of the beam on the frequency and form of the natural oscillations is investigated. For longitudinal motions it is shown that different types of natural displacements and internal stresses of the beam exist. For transverse oscillations, it is found that there are frequency zones corresponding to different forms of the solutions of the characteristic equation obtained using the proposed model.     

Dimensional variation in production of high-aspect-ratio micro-pillars array by micro powder injection molding

Micro powder injection molding (μPIM) is one of the potential processes for the mass production of metallic microstructures and micro components. Here, μPIM is the miniaturization of conventional PIM, which involves four processing steps: mixing, injection molding, debinding and sintering. This paper looks into the feasibility and effectiveness of μPIM as a key mass production process for the fabrication of metallic micro components. For it to be an effective re-production process, it is imperative to examine how well parts can be duplicated/fabricated from a master mold. In this work, the dimensional variation of high-aspect-ratio micro-pillars arrays, in particular the dimensional shrinkage, global warpage, and surface roughness at each stage of the μPIM process for a range of molding pressures, are quantified and compared in detail. The sensitivity of the dimensional variation of the microstructures to the packing pressure is reported. The mechanism behind the dimensional variation is analyzed. PACS 81.20.Ev; 81.20.Hy; 81.70.Fy; 07.60.Ly; 81.05.-t     

Nitric oxide concentration measurements in atmospheric pressure flames using electronic-resonance-enhanced coherent anti-Stokes Raman scattering

We report the application of electronic-resonance-enhanced coherent anti-Stokes Raman scattering (ERE-CARS) for measurements of nitric oxide concentration ([NO]) in three different atmospheric pressure flames. Visible pump (532 nm) and Stokes (591 nm) beams are used to probe the Q-branch of the Raman transition. A significant resonance enhancement is obtained by tuning an ultraviolet probe beam (236 nm) into resonance with specific rotational transitions in the (v’=0, v”=1) vibrational band of the A²Σ⁺–X²Π electronic system of NO. ERE-CARS spectra are recorded at various heights within a hydrogen-air flame producing relatively low concentrations of NO over a Hencken burner. Good agreement is obtained between NO ERE-CARS measurements and the results of flame computations using UNICORN, a two-dimensional flame code. Excellent agreement between measured and calculated NO spectra is also obtained when using a modified version of the Sandia CARSFT code for heavily sooting acetylene-air flames (φ=0.8 to φ=1.6) on the same Hencken burner. Finally, NO concentration profiles are measured using ERE-CARS in a laminar, counter-flow, non-premixed hydrogen-air flame. Spectral scans are recorded by probing the Q₁ (9.5), Q₁ (13.5) and Q₁ (17.5) Raman transitions. The measured shape of the [NO] profile is in good agreement with that predicted using the OPPDIF code, even without correcting for collisional effects. These comparisons between [NO] measurements and predictions establish the utility of ERE-CARS for detection of NO in flames with large temperature and concentration gradients as well as in sooting environments. PACS 07.88.+y; 42.62.Fi; 42.65.Dr     

Correlation of Plasma Sprayed Coating Deposition Efficiency with Volume Flux Measurements by Phase Doppler Anemometry (PDA)

The use of phase-Doppler anemometry (PDA) to characterize the detail in-flight plasma sprayed particle behavior has been demonstrated previously [Ma et al. Plasma Chem Plasma Process 24(1):85; 25(1):56] The present articles shows further that a direct relationship may exist between the PDA measured particle volume flux and the coating microstructure and deposition efficiency (DE). In the situation when the precise particle temperature information is not available, the PDA measured particle volume flux may provide an alternative to predict quantitatively the variation of the coating microstructure and the DE. By monitoring the in-flight particle volume flux variations, instead of the particle velocity, size and temperature individually and simultaneously, the optimal settings of the plasma spraying parameters may also be determined conveniently. However, it is noted that the effective applications of such approach depend largely on the particle surface morphology and the pre-determination of the particle size range.     

An evaluation approach to engineering design in QFD processes using fuzzy goal programming models

Quality function deployment (QFD) is a product development process used to achieve higher customer satisfaction: the engineering characteristics affecting the product performance are designed to match the customer requirements. From the viewpoint of QFDs designers, product design processes are performed in uncertain environments, and usually more than one goal must be taken into account. Therefore, when dealing with the fuzzy nature in QFD processes, fuzzy approaches are applied to formulate the relationships between customer requirements (CRs) and engineering design requirements (DRs), and among DRs. In addition to customer satisfaction, the cost and technical difficulty of DRs are also considered as the other two goals, and are evaluated in linguistic terms. Fuzzy goal programming models are proposed to determine the fulfillment levels of the DRs. Differing from existing fuzzy goal programming models, the coefficients in the proposed model are also fuzzy in order to expose the fuzziness of the linguistic information. Our model also considers business competition by specifying the minimum fulfillment levels of DRs and the preemptive priorities between goals. The proposed approach can attain the maximal sum of satisfaction degrees of all goals under each confidence degree. A numerical example is used to illustrate the applicability of the approach.     

Aeroelastic flutter of a disk rotating in an unbounded acoustic medium

The linear aeroelastic stability of an unbaffled flexible disk rotating in an unbounded fluid is investigated by modeling the disk-fluid system as a rotating Kirchhoff plate coupled to the irrotational motions of a compressible inviscid fluid. A perturbed eigenvalue formulation is used to compute systematically the coupled system eigenvalues. Both a semi-analytical and a numerical method are employed to solve the fluid boundary value problem. The semi-analytical approach involves a perturbation series solution of the dual integral equations arising from the fluid boundary value problem. The numerical approach is a boundary element method based on the Hadamard finite part. Unlike previous works, it is found that a disk with zero material damping destabilizes immediately beyond its lowest critical speed. Upon the inclusion of small disk material damping, the flutter speeds become supercritical and increase with decreasing fluid density. The competing effects of radiation damping into the surrounding fluid and disk material damping control the onset of flutter at supercritical speed. The results are expected to be relevant for the design of rotating disk systems in data storage, turbomachinery and manufacturing applications.     

MULTI-MODE TRIMMING OF IMPERFECT THIN RINGS USING MASSES AT PRE-SELECTED LOCATIONS

This paper presents a practical method for trimming the natural frequencies of an initially imperfect ring to simultaneously eliminate certain of the frequency splits present. Compared with previous work, the novel feature of this method is that the trimming masses are positioned at pre-selected locations on the ring. The basis for the proposed method is the concept of equivalent imperfection mass, which allows any imperfect ring to be considered as a perfect ring with equivalent imperfection masses attached. By considering this trimming problem it is deduced that it is possible to trim N pairs of modes simultaneously by removing (a minimum of) 2 N trimming masses at particular locations around the ring. By positioning the trimming masses at pre-selected locations, it is shown that a simple set of trimming masses can be calculated easily, and from this set an infinite number of solution sets can be found. Methods for generating these sets are outlined for the trimming of both a single and a dual pair of modes. In practice, it is likely that the trimming masses will be spaced regularly. For this special case, it is found that it is not possible to trim all single- and dual-mode pairs with any arrangement of masses. Validation of the derived simple solution set and the proposed procedure to generate further sets is achieved by studying a number of theoretical examples.     

Fatigue in ferroelectric ceramics due to cluster growth

A simple fatigue model for perovskite ferroelectrics is developed based on electric field driven point defect drift. At room temperature significant point defect cluster growth only occurs if diffusion is enhanced by an electrically supported drift mechanism. In order to achieve a significant charge carrier drift considerable parts of the depolarizing field have to be temporarily unscreened. These unscreened local environments can only occur under a bipolar duty cycle just before complete reversal of the domain system. The case of the oxygen vacancy as an ionic defect is modeled.     

The analysis of thermal stresses in thermopiezoelastic semi-infinite body with an edge crack

Summary  Thermopiezoelastic materials have recently attracted considerable attention because of their potential use in intelligent or smart structural systems. The governing equations of a thermopiezoelastic medium are more complex due to the intrinsic coupling effects that take place among mechanical, electrical and thermal fields. In this analysis, we deal with the problem of a crack in a semi-infinite, transversely isotropic, thermopiezoelastic material by means of potential functions and Fourier transforms under steady heat-flux loading conditions. The problem is reduced to a singular integral equation that is solved. The thermal stress intensity factor for a crack situated in a cadmium selenide material is calculated. Received 20 March 2001; accepted for publication 18 October 2001