Hierarchical structures in a turbulent pipe flow

A hierarchical structure (HS) analysis (β-test and γ-test) is applied to a fully developed turbulent pipe flow. Velocity signals are measured at two cross sections in the pipe and at a series of radial locations from the pipe wall. Particular attention is paid to the variation of turbulent statistics at wall units 10<y⁺<3000. It is shown that at all locations the velocity fluctuations satisfy the She–Leveque hierarchical symmetry (Phys. Rev. Lett. 72 (1994) 336). The measured HS parameters, β and γ, are interpreted in terms of the variation of fluid structures. Intense anisotropic fluid structures generated near the wall appear to be more singular than the most intermittent structures in isotropic turbulence and appear to be more outstanding compared to the background fluctuations; this yields a more intermittent velocity signal with smaller γ and β. As turbulence migrates into the logarithmic region, small-scale motions are generated by an energy cascade and large-scale organized structures emerge which are also less singular than the most intermittent structures of isotropic turbulence. At the center, turbulence is nearly isotropic, and β and γ are close to the 1994 She–Leveque predictions. A transition is observed from the logarithmic region to the center in which γ drops and the large-scale organized structures break down. We speculate that it is due to the growing eddy viscosity effects of widely spread turbulent fluctuations in a similar way as in the breakdown of the Taylor vortices in a turbulent Couette–Taylor flow at high Reynolds numbers.     

Electrochemical oxidation of tetramethoxy precursor as a key step for the synthesis of coenzyme Q10

The feasibility of electrosynthesis of coenzyme Q₁₀ (1) by electrooxidation of tetramethoxy precursor (2) has been investigated at carbon, Pt and BDD anodes in a divided cell. The process strongly depends on the applied potential, anode material and water content of the solvent. At carbon anodes in CH₃CN/CH₂Cl₂ + 0.15 M Bu₄NBF₄ at proper operative conditions high faradic efficiency (>60%) and excellent selectivity (95–97%) of the target product were obtained.     

Time-dependent Green's functions for an anisotropic bimaterial with viscous interface

By virtue of the Stroh formalism, we derive the exact closed-form solutions for the time-dependent two-dimensional Green's functions due to a line force and line dislocation in an anisotropic bimaterial with a viscous interface. We first reduce the boundary value problem to two coupled homogeneous first-order partial differential equations, which can be solved using a decoupling technique. The full-field expressions of the time-dependent displacements and stresses due to the line force and line dislocation interacting with the viscous interface are obtained.     

The enhancement of photoluminescence of n-type porous silicon by Hall-effect assistance during electrochemical anodization

In this study, n-type porous silicon (n-PS) films with high-aspect-ratio Si-tips are formed with the assistance of Hall-effect during the electrochemical anodization. Lorentz force sweeps down the majority carriers (electrons) in n-type Si to enhance the anodization etching. Surface layers are inverted from n-type to p-type, so sufficient holes can continuously appear on the surface to participate in chemical reaction during the etching process. Illumination is not necessary in this process, so the problem of illumination-depth limitation is solved. The etching current, morphology, and photoluminescence of the n-PS prepared in this way are investigated. Strong visible photoluminescence emissions at room temperature are demonstrated on n-PS.     

An asymptotic approach to the problem of the free oscillations of a beam

Equations describing the free small longitudinal and transverse oscillations of a straight elastic beam of rectangular cross section are obtained using the plane linear theory of elasticity and the method of integrodifferential relations. The initial system of partial differential equations is reduced to a system of ordinary linear differential equations with constant coefficients. The effect of the geometrical and elastic characteristics of the beam on the frequency and form of the natural oscillations is investigated. For longitudinal motions it is shown that different types of natural displacements and internal stresses of the beam exist. For transverse oscillations, it is found that there are frequency zones corresponding to different forms of the solutions of the characteristic equation obtained using the proposed model.     

Dimensional variation in production of high-aspect-ratio micro-pillars array by micro powder injection molding

Micro powder injection molding (μPIM) is one of the potential processes for the mass production of metallic microstructures and micro components. Here, μPIM is the miniaturization of conventional PIM, which involves four processing steps: mixing, injection molding, debinding and sintering. This paper looks into the feasibility and effectiveness of μPIM as a key mass production process for the fabrication of metallic micro components. For it to be an effective re-production process, it is imperative to examine how well parts can be duplicated/fabricated from a master mold. In this work, the dimensional variation of high-aspect-ratio micro-pillars arrays, in particular the dimensional shrinkage, global warpage, and surface roughness at each stage of the μPIM process for a range of molding pressures, are quantified and compared in detail. The sensitivity of the dimensional variation of the microstructures to the packing pressure is reported. The mechanism behind the dimensional variation is analyzed. PACS 81.20.Ev; 81.20.Hy; 81.70.Fy; 07.60.Ly; 81.05.-t     

Correlation of Plasma Sprayed Coating Deposition Efficiency with Volume Flux Measurements by Phase Doppler Anemometry (PDA)

The use of phase-Doppler anemometry (PDA) to characterize the detail in-flight plasma sprayed particle behavior has been demonstrated previously [Ma et al. Plasma Chem Plasma Process 24(1):85; 25(1):56] The present articles shows further that a direct relationship may exist between the PDA measured particle volume flux and the coating microstructure and deposition efficiency (DE). In the situation when the precise particle temperature information is not available, the PDA measured particle volume flux may provide an alternative to predict quantitatively the variation of the coating microstructure and the DE. By monitoring the in-flight particle volume flux variations, instead of the particle velocity, size and temperature individually and simultaneously, the optimal settings of the plasma spraying parameters may also be determined conveniently. However, it is noted that the effective applications of such approach depend largely on the particle surface morphology and the pre-determination of the particle size range.     

Fatigue in ferroelectric ceramics due to cluster growth

A simple fatigue model for perovskite ferroelectrics is developed based on electric field driven point defect drift. At room temperature significant point defect cluster growth only occurs if diffusion is enhanced by an electrically supported drift mechanism. In order to achieve a significant charge carrier drift considerable parts of the depolarizing field have to be temporarily unscreened. These unscreened local environments can only occur under a bipolar duty cycle just before complete reversal of the domain system. The case of the oxygen vacancy as an ionic defect is modeled.     

Buckling of sandwich wide columns

The paper deals with the theoretical prediction of buckling loads for sandwich columns with metallic and laminated facings and foam or honeycomb core. The loading is a uniform axial compression, applied statically (very slowly) and suddenly with constant magnitude and infinite duration (step loading). The effect of length and boundary conditions is assessed and results are presented for the following cases: for a cantilever column, a simply supported column and a clamped column, for several lengths. Several fiber materials are used in the laminated facings. Two types of core were examined: alloy-foam or hexagonal glass/phenolic honeycomb. The facings are Boron/Epoxy, Graphite/Epoxy and Kevlar/Epoxy laminates with 0° orientation with respect to the column axis and a metallic one made out of aluminum. These various materials are employed to provide comparative data that can be used in design. Results, for the static case are generated by computer codes as well as by the use of closed form theoretical solutions. For the dynamic case, results are generated by the DYNA3D code.