Experimental study on the fiber pull-out of composites using digital gradient sensing technique

A method to measure the stress field at the fiber tip in the fiber pull out test was proposed by using a digital gradient sensing technique. First, the principle of digital gradient sensing is introduced, and the non-contact optical system of digital gradient sensing developed. Then, a fiber reinforced composite model specimen, where a nail was inserted in epoxy resin to act as a fiber, was performed, and a pull out test was conducted on the specimen using the digital gradient sensing technique. Finally, the angular deflections contour at the fiber tip was obtained, and the stress intensity factor was extracted from the angular deflections. The results show that the stress intensity factor at the fiber tip extracted from the angular deflections agreed with the results calculated by the finite element method.     

Cure monitoring of CFRP composites by dynamic mechanical analyser

The cure characteristics of carbon/MTM44-1 epoxy composite prepreg and neat MTM44-1 epoxy resin are monitored using a dynamic mechanical analyser (DMA). This study also assesses whether the simple containment device recommended by the DMA manufacturer for powder and gel is suitable for prepregs. The device is a disposable 0.1-mm thick stainless steel pocket. The cure behaviour of the packaged materials is compared with that of the unpackaged prepreg. All the samples are cured following the manufacturer's 180°C-isothermal schedule with heating rates of 2 °C/min and 5 °C/min. The tests highlight that: (i) the cure of composite prepregs and resin can be monitored using a DMA; (ii) the stainless steel pocket does not influence the cure of the prepreg and resin; and (iii) the softening and melting of the uncured resin, the resin low viscosity state and the subsequent gelation-vitrification-solidification of the resin are detected with this method.     

Preparation and characterization of natural zeolite supported nano TiO2 photocatalysts by a modified electrostatic self‐assembly method

Natural zeolite supported nano TiO₂ photocatalysts were prepared by a modified electrostatic self‐assembly (ESA) method. First, γ‐mercaptopropyltrimethoxysilane with sulfhydryl (―SH) functional groups was modified on the zeolite powders by using a ‘dry process’. Second, silane with ―SH functional groups was oxidized to sulfonate (―SO₃H) groups by using a hydrogen peroxide/glacial acetic acid mixed solution, and the surface of ―SO₃H silane–zeolite was electronegative charged due to the ionization of ―SO₃H. Third, the hydrolytic titanium polycation from TiCl₄ solution assembled onto the electronegative charged zeolite under electrostatic attraction in the reaction solutions. Finally, zeolite supported nano TiO₂ photocatalysts can be obtained after the above compounds calcined at certain temperature. The samples were characterized by X‐ray diffraction (XRD), Brunauer–Emmett–Teller (BET) surface areas, Fourier transform infrared spectroscopy (FT‐IR), X‐ray photoelectron spectroscopy (XPS) and X‐ray fluorescence (XRF). The photocatalytic activities of the samples were evaluated by the degradation of methyl orange in aqueous solution. The results showed that ESA method effectively improved the composite efficiency of zeolite with TiO₂. The photocatalysts prepared by ESA method exhibited higher photocatalytic and recycling activities than that of traditional method. Copyright © 2014 John Wiley & Sons, Ltd.     

Biodegradability study of polylactic acid/ thermoplastic polyurethane blends

Blends with varied ratio of polylactic acid (PLA) and thermoplastic polyurethane (TPU) were prepared by melt blending. The PLA content in blends was 20, 40, 60 and 80 wt%. Samples of pure PLA and TPU that underwent the same thermal treatment were also prepared. Biodegradation was examined by respirometry. Pure TPU started to degrade immediately due to degradation of the low molecular weight plasticizer in the polymer. Pure PLA, on the other hand, exhibited an incubation period after which degradation progressed rapidly and was almost complete after 70 days. The degradation profile of the blends can be correlated to their morphology. Samples with a co-continuous morphology initially degrade at a higher rate than the rest of the samples due to the higher exposure of the TPU phase in these blends.     

Separation and quantification of quantum dots and dissolved metal cations by size exclusion chromatography–ICP-MS

The prevalence of engineered metallic nanoparticles within electronic products has evoked a need to assess their occurrence and fate within environmental systems upon potential release of these nanoparticles. Quantum dots (QDs) are mixed-metal nanocrystals with the smallest of particle sizes (2–10 nm) that readily leach heavy metal cations in water, potentially creating a co-occurrence of nanoparticulate and dissolved metal pollutants. In this report, we develop a size exclusion chromatography–inductively coupled plasma–mass spectrometry method (SEC-ICP-MS) for the rapid separation and quantification of ~5-nm-sized CdSe/ZnS QDs and dissolved Cd²⁺ and Zn²⁺ cations in water. The SEC-ICP-MS method provided a wide chromatographic separation of CdSe/ZnS QDs and dissolved Cd²⁺ and Zn²⁺ cations only when using the smallest SEC column pore size available and an eluent composition that prevented loss of metals to column polymer surfaces by using a surfactant to ensure elution of QDs (ammonium lauryl sulfate) and a complexing ligand to ensure elution of metal cations (ethylenediaminetetraacetate). Detection limits were between 0.2 and 2 µg L^–1 for Cd²⁺ and Zn²⁺ among dissolved cation and QD phases, and ranges of linearity covered two to three orders of magnitude. Gold nanoparticles of sizes 5, 10, 20 and 50 nm were also effectively separated from dissolved Au³⁺ cations, illustrating the method applicability to a wide range of nanoparticle sizes and compositions. QD and dissolved metal concentrations measured by SEC-ICP-MS were comparable to those measured using the more conventional method of centrifuge ultrafiltration on split samples for dissolved and total metals. The applicability of the SEC-ICP-MS method to environmental systems was verified by measuring QDs and dissolved metals added to samples of natural waters. The method was also applied to monitoring CdSe/ZnS dissolution kinetics in an urban river water. The SEC-ICP-MS developed here may offer improved automation for characterising heterogeneous suspensions containing >1 µg L^–1 heavy metals.     

Use of HPHT Autoclave to Determine Corrosion Inhibition Effect of Poly（methyl methacrylate-co-N-vinyl-2-pyrrolidone） on Carbon Steels in 3.5% NaCl Solution Saturated with CO2

The influence of poly(methylmethacrylate-co-N-vinyl-2-pyrrolidone), P(MMA-co-VP), on corrosion of carbon steels(J55, N80, P110 SS and C110 steels) in 3.5 wt% NaCl solution saturated with CO2 was evaluated using static high pressure and high temperature(HPHT) autoclave. The surface was further evaluated by X-ray diffraction(XRD), scanning electron microscopy(SEM) and contact angle measurements. Quantum chemical calculations have been used to evaluate the structural, electronic and reactivity parameters of the inhibitor on the steels surface. SEM, XRD and contact angle measurement studies reveal that the surface of metals are quite unaffected after use of inhibitor in 3.5% NaCl solution saturated with CO2.     

Selective Permeability of Uranyl Peroxide Nanocages to Different Alkali Ions: Influences from Surface Pores and Hydration Shells

The precise guidance to different ions across the biological channels is essential for many biological processes. An artificial nanopore system will facilitate the study of the ion‐transport mechanism through nanosized channels and offer new views for designing nanodevices. Herein we reveal that a 2.5 nm‐sized, fullerene‐shaped molecular cluster Li_48+mK₁₂(OH)_m[UO₂(O₂)(OH)]_60?(H₂O)_n (m≈20 and n≈310) ( U₆₀ ) shows selective permeability to different alkali ions. The subnanometer pores on the water–ligand‐rich surface of U₆₀ are able to block Rb⁺ and Cs⁺ ions from passing through, while allowing Na⁺ and K⁺ ions, which possess larger hydrated sizes, to enter the interior space of U₆₀ . An interestingly high entropy gain during the binding process between U₆₀ and alkali ions suggests that the hydration shells of Na⁺/K⁺ and U₆₀ are damaged during the interaction. The ion selectivity of U₆₀ is greatly influenced by both the morphologies of the surface nanopores and the dynamics of the hydration shells.     

钛表面钠氢氧钛纳米线的结构、生物活性和MC3T3-E1细胞响应

采用化学方法处理微弧氧化(MAO)制备的含Si、Ca元素的Ti O2涂层(SC),获得钛氢氧钠(Na0.8H1.2Ti3O7)生物活性纳米线结构。化学处理过程中,SC涂料表面出现了Ca、Na元素溶解,Si元素沉积的现象。化学处理后的SC涂层比SC涂料具有更好的吸水性和诱导磷灰石形成能力。这与处理后涂层(SHTO)特殊的纳米结构有关,在模拟体液浸泡过程中更容易形成Ti-OH。同时,钠氢氧钛纳米线的表面形貌、相组成、OH基团以及良好的湿润能力使其更加适合于MC3T3-E1细胞的粘附和增值。     

Direct and indirect electrochemical oxidation of Indigo Carmine using PbO2 and TiRuSnO2

Journal of Solid State Electrochemistry - In this paper, the electrocatalytic properties of PbO2 and TiRuSnO2 anodes for direct and indirect electrochemical oxidation of a synthetic solution...     

Self-Optimization of the Active Site of Molybdenum Disulfide by an Irreversible Phase Transition during Photocatalytic Hydrogen Evolution

The metallic 1T-MoS₂ has attracted considerable attention as an effective catalyst for hydrogen evolution reactions (HERs). However, the fundamental mechanism about the catalytic activity of 1T-MoS₂ and the associated phase evolution remain elusive and controversial. Herein, we prepared the most stable 1T-MoS₂ by hydrothermal exfoliation of MoS₂ nanosheets vertically rooted into rigid one-dimensional TiO₂ nanofibers. The 1T-MoS₂ can keep highly stable over one year, presenting an ideal model system for investigating the HER catalytic activities as a function of the phase evolution. Both experimental studies and theoretical calculations suggest that 1T phase can be irreversibly transformed into a more active 1T′ phase as true active sites in photocatalytic HERs, resulting in a “catalytic site self-optimization”. Hydrogen atom adsorption is the major driving force for this phase transition.