Comparison of purge and trap GC/MS and spectrophotometry for monitoring petroleum hydrocarbon degradation in oilfield produced waters

Results of using a field spectrophotometer and its appropriate protocols as a surrogate method for an oilfield produced water treatment process is presented. Methylene chloride extractions of the produced water before and after treatment maintained a yellow color pigment that was directly proportional to the hydrocarbon concentration. From this, an absorption spectrum and standard curve were developed. A resultant linear plot of the standard curve indicated that there is an excellent correlation (r²=0.9847) between the varying concentrations and the associated absorbance values at a wavelength of 400 nm. Total n-alkane concentration comparisons between the laboratory GC/MS analysis and the spectrophotometry analysis generated data of similar accuracy and precision at concentrations ranging from 1 to 137 mg/l (alpha=0.05). Linear comparisons between GC/MS and spectrophotometric coefficients were near unity, with the constant being near zero, with a correlation coefficient (r²) of 0.99. Based on this study, spectrophotometry is a complimentary method to GC/MS for determining total n-alkane concentrations in oilfield produced water samples.     

Photocatalytic and antifouling properties of TiO2-based photocatalytic membranes

Photocatalysis has been extensively studied due to its potential ability to avoid the excessive use of chemical reagents and reduce the energy consumption by employing solar energy. Moreover, to alleviate the reduction in the membrane permeation selectivity, separation efficiency, and membrane service life caused by the emerging micro-pollutants and membrane fouling, membrane technology is often coupled with microbial, electrochemical, and catalytic processes. However, although physical/chemical cleaning and membrane module replacement can overcome the inherent limitations caused by membrane fouling and other membrane separation processes, high operating costs limit their practical applications. In this review, common preparation methods for TiO₂ photocatalytic membranes are described in detail, and the main approaches to enhancing their photocatalytic performance are discussed. More importantly, the mechanism of the TiO₂ photocatalytic membrane antifouling process is elucidated, and some applications of photocatalytic membranes in other areas are described. This review systematically outlines future research directions in the field of photocatalytic membrane modification, including metal and non-metal doping, fabrication of heterojunction structures, control over reaction conditions, increase in hydrophilicity, and increase in membrane porosity.     

Elastic Analysis of Anisotropic Functionally Graded Rotating Disks With Non-Uniform Thicknesses北大核心CSCD

研究了任意梯度变化的变厚度各向异性转动圆盘的弹性问题.假设圆盘绕刚性轴匀速转动,其材料性能和厚度沿径向任意梯度变化.考虑圆盘在中心转轴处受位移约束,外侧自由,根据各向异性转动圆盘的平衡微分方程,得到关于径向应力的Fredholm积分方程,继而通过对Fredholm积分方程进行数值求解,得到结构的位移场和应力场.对具体梯度变化情况仅需代入相应梯度变化进行求解即可.数值算例部分,通过假设厚度、弹性模量等参数为特殊的幂函数形式,将由Fredholm积分方程求出的数值解与对应的精确解进行对比,以及针对常见的Voigt模型,将由该方法算得的数值解和ANSYS有限元计算结果进行对比,验证了该方法的准确性和精度.其次,针对Voigt模型,重点分析了厚度变化、材料性能梯度参数、各向异性度等对应力场和位移场的影响.提出了针对材料性能和厚度沿径向呈任意梯度变化的圆盘结构弹性分析方法,将为优化功能梯度圆盘的结构和材料参数、有效调整构件应力分布、提高结构安全性,提供强有力的工具;算例分析结果对功能梯度圆盘在复杂条件下的结构安全设计有重要的理论指导意义.     

Characterizations of Kadec-Klee properties in symmetric spaces of measurable functions

We present several characterizations of Kadec-Klee properties in symmetric function spaces on the half-line, based on the -functional of J. Peetre. In addition to the usual Kadec-Klee property, we study those symmetric spaces for which sequential convergence in measure (respectively, local convergence in measure) on the unit sphere coincides with norm convergence.

     

Free vibrations of a thin rectangular plate

An asympototic method developed by V.V. Kucherenko and the author is applied to the problem of free vibrations of a thin plate strip in a state of a plane strain. The first few terms of an asymptotic expansion of the natural frequencies are calculated. The results are compared with those obtained by using the classical and refined theories.     

Building unit and topological evolution in the hydrothermal DABCO-U-F system

Compounds NDUF-1 ([C(6)H(14)N(2)](UO(2))(2)F(6); P2(1)/c, a = 6.9797(15) A, b = 8.3767(15) A, c = 23.760(5) A, beta = 91.068(4) degrees, V = 1388.9(5) A(3), Z = 4), NDUF-2 ([C(6)H(14)N(2)](2)(UO(2))(2)F(5)UF(7).H(2)O), NDUF-3 ((NH(4))(7)U(6)F(31); R3, a = 15.4106(8) A, c = 10.8142(8) A, V = 2224.1(2) A(3), Z = 3), and NDUF-4 ([NH(4)]U(3)F(13)) have been synthesized hydrothermally from fixed composition reactant mixtures over variable time periods [DABCO (C(6)H(12)N(2)), UO(2)(NO(3))(2).6H(2)O, HF, and H(2)O; 2-14 days]. Observed is a systematic evolution of the structural building units within these materials from the UO(2)F(5) pentagonal bipyramid in NDUF-1 and -2 to the UF(8) trigonal prism in NDUF-2 and finally to the UF(9) polyhedron in NDUF-3 and -4 as a function of reaction time. Coupled to this coordination change is a reduction of U(VI) to U(IV) as well as a breakdown of the organic structure-directing agent from DABCO to NH(4)(+). These processes contribute to a structural transition from layered topologies (NDUF-1) to chain (NDUF-2), back to layered (NDUF-3), and ultimately to framework (NDUF-4) connectivities. The synthesis conditions, crystal structures, and possible transformation mechanisms within this system are presented.     

2,6-Lutidine-N-oxide complexes of rare-earth bromides

2,6-Lutidine-N-oxide (LNO) complexes of rare-earth bromides of the composition wheren = l for M = La, Pr, Nd, Sm, Gd, Ho, Er; andn = 0 for M = Y have been prepared and characterised by analyses, conductance and infrared data. Infrared spectra of the complexes indicate that the coordination of ligand to the metal ion takes place through the oxygen of the ligand, and the water molecule in the complexes present is coordinated to the metal. A coordination number of seven has been suggested to all the rare-earth metal ions.     

Modification of the resistance of two epoxy resins to accelerated weathering using calcium sulfate as a photostabilizer

Epoxy-timber composites have received increasing attention during the last decades because there are many advantages related to their uses as construction materials in applications such as timber bridges. However, the durability of epoxy-timber composites under outdoor conditions has become a concern for many epoxy resins. This study evaluated the chemical, thermal, and mechanical properties of two cured epoxies, the product of the diglycidyl ether of bisphenol A with 2,4-trimethyl-1,6-hexanediamine (DGEBA-TMDA) and the analogous resin prepared with the hydrogenated diglycidyl ether of bisphenol A (HDGEBA-TMDA), each mixed with 2?wt. % calcium sulfate (CS). We hypothesized that the use of CS, as an inorganic UV absorber, could decrease undesirable effects arising from exposure to UV light, moisture, and extreme temperatures.

An accelerated aging chamber simulated natural weathering for 1, 2, 3, 4, and 6?months. Chemical changes in cured epoxy systems over time in the presence and absence of CS fillers were determined using Fourier transform infrared spectroscopy (FT-IR). Thermal degradation profiles before and after exposure to accelerated weathering were followed by thermogravimetric analysis (TGA). The glass transition temperatures (T_g) before and after accelerated weathering were measured, and the effect of accelerated weathering on the surface morphology of the epoxy systems was investigated by scanning electron microscopy (SEM). In the presence of CS, after 6?months accelerated weathering the tensile strength of DGEBA-TMDA reduced by 23.8?±?2.4%, compared to 46.5?±?5.5% in its absence, while the corresponding values for HDGEBA-TMDA were 21.4?±?2.1% and 28.7?±?1.8%.     

Biomaterials in total joint replacement

The current state of materials systems used in total hip replacement is presented in this paper. An overview of the various material systems used in total hip replacement reported in literature is presented in this paper. Metals, polymers, ceramics and composites are used in the design of the different components of hip replacement implants. The merits and demerits of these material systems are evaluated in the context of mechanical properties most suitable for total joint replacement such as a hip implant. Current research on advanced polymeric nanocomposites and biomimetic composites as novel materials systems for bone replacement is also discussed. This paper examines the current research in the materials science and the critical issues and challenges in these materials systems that require further research before application in biomedical industry.