The effect of vertical vibration on the onset of thermocapillary convection in a horizontal liquid layer

The effect of vertical vibration on the onset of Marangoni convection in a horizontal layer of a viscous incompressible uniform liquid with a free surface and a hard (solid) or soft (impermeable and stress-free) wall is investigated. In the case of harmonic vibration, a dispersion relation is constructed in explicit form using continued fractions. From this, equations are obtained for determining the critical values of the parameters for all three main types of loss of stability. Neutral curves of the monotonic and oscillatory instability are constructed, for fixed frequency and amplitude of the vibration, in the form of a graph of the Marangoni number against the wave number. The regions of parametric resonances, corresponding to synchronous and subharmonic modes are determined. The frequency values for which a high-frequency asymptotic form is reached are obtained. The long-wave Marangoni oscillatory instability is investigated, and it is shown that in this case the Marangoni numbers are negative and depend only on the Prandtl and Biot numbers.     

A numerical investigation of the resonance of gas-filled microbubbles: resonance dependence on acoustic pressure amplitude

The general Keller–Herring equation for free gas bubbles is augmented by specific terms to describe the elasticity, viscosity and thickness of the encapsulating shell in ultrasound contrast agent microbubbles. A numerical investigation that analyses the acoustic backscatter from bubbles is employed to identify resonance frequencies that can be compared, for increasing driving pressure amplitude, with linear approximations obtained via analytical considerations. Calculations for bubbles of the size employed in diagnostic ultrasound, between 2 and 6 μm diameter, that are immersed in water and blood and exposed to monochromatic insonation, causing the bubbles to undergo stable cavitation, reveal that the resonance frequency diverges from the linear approximation as the pressure amplitude is increased. The shift in resonance, to lower frequency values, is found to be more pronounced for larger bubbles with the calculated value differing by up to 40% from the linear approximation. The results of this simulation might be potentially useful in preparation of formulations of ultrasound contrast agents with the specifically desired features, such as for instance resonance frequency.     

Permeability of microscale fibrous porous media using the lattice Boltzmann method

The permeabilities of microscale fibrous porous media were calculated using the multiple-relaxation-time (MRT) lattice Boltzmann method (LBM). Two models of the microscale fibrous porous media were constructed based on overlapping fibers (simple cubic, body-centered cubic). Arranging the fibers in skew positions yielded two additional models comprising non-overlapping fibers (skewed simple cubic, skewed body-centered cubic). As the fiber diameter increased, the fibers acted as granular inclusions. The effects of the overlapping fibers on the media permeability were investigated. The overlapping fibers yielded permeability values that were a factor of 2.5 larger than those obtained from non-overlapping fibers, but the effects of the fiber arrangement were negligible. Two correlations were obtained for the overlapping and non-overlapping fiber models, respectively. The effects of the rarefaction and slip flow are also discussed. As the Knudsen number increased, the dimensionless permeability increased; however, the increase differed depending on the fiber arrangement. In the slip flow regime, the fiber arrangement inside the porous media became an important factor.     

Numerical analysis of enhanced mixing in a Gallay tote blender

The mixing performance of a multi-bladed baffle inserted into a traditional Gallay tote blender is explored by graphic processing unit-based discrete element method software. The mixing patterns and rates are investigated for a binary mixture, represented by two different colors, under several loading profiles. The baffle effectively enhances the convective mixing both in the axial and radial directions, because of the disturbance it causes to the initial flowing layer and solid-body zone, compared with a blender without a baffle. The axial mixing rate is affected by the gap between the baffle and the wall on the left and right sides, and an optimal blade length corresponds to the maximum mixing rate. However, the radial mixing rate increases with the blade length almost monotonically.     

A comparative study of truly incompressible and weakly compressible SPH methods for free surface incompressible flows

In this paper, the performance of the incompressible SPH (ISPH) method and an improved weakly compressible SPH (IWCSPH) method for free surface incompressible flows are compared and analyzed. In both methods, the Navier–Stokes equations are solved, and no artificial viscosity is used. The ISPH algorithm in this paper is based on the classical SPH projection method with common treatments on solid boundaries and free surfaces. The IWCSPH model includes some advanced corrective algorithms in density approximation and solid boundary treatment (SBT). In density approximation, the moving least squares (MLS) approach is applied to re‐initialize density every several steps to obtain smoother and more stable pressure fields. An improved coupled dynamic SBT algorithm is implemented to obtain stable pressure values near solid wall areas and, thus, to minimize possible numerical oscillations brought in by the solid boundaries. Three representative numerical examples, including a benchmark test for hydrostatic pressure, a dam breaking problem and a liquid sloshing problem, are comparatively analyzed with ISPH and IWCSPH. It is demonstrated that the present IWCSPH is more attractive than ISPH in modeling free surface incompressible flows as it is more accurate and more stable with comparable or even less computational efforts. Copyright © 2013 John Wiley & Sons, Ltd.     

Ultra-broadband piezoelectric energy harvesting via bistable multi-hardening and multi-softening

Nonlinear Dynamics - An electromechanical coupled distributed parameter model is derived for a broadband piezoelectric energy harvester with nonlinear magnetic interaction and...     

A modified model for isothermal homogeneous and heterogeneous reactions in the boundary-layer flow of a nanofluid

The homogeneous and heterogeneous reactions in the boundary-layer of a flat surface are considered. The autocatalysts are assumed to be of regular sizes, while the solution is a dilute nanofluid. The heat release due to the chemical reactions is taken into account. The Buongiorno's model is used to describe the behaviors of this reaction system. This configuration makes the current model be different from all previous publications. Multiple solutions are given numerically to the rescaled nonlinear system, whose stability is verified. The results show that the strength coefficients of the homogeneous and heterogeneous reactions are key factors to cause the appearance of the multiple solutions in the distribution of the chemical reactions. Nanofluids enhance the diffusion of heat and help maintain the stability of chemical reactions.     

过载作用下聚乙烯疲劳裂纹扩展行为研究

论文针对中密度聚乙烯材料(MDPE)，采用平板试样进行了I型疲劳裂纹扩展和单次过载下裂纹扩展试验．发现与金属材料类似，单次拉伸过载对聚乙烯(PE)的疲劳裂纹扩展有明显的迟滞作用，降低了裂纹扩展速率．试验还通过变载荷刻线法获取疲劳裂纹扩展前缘的实际形貌和变化规律，对常规变载荷刻线方法进行了调整和验证，其修正方法对高分子材料的疲劳裂纹扩展前缘刻线具有较好的效果．通过观察发现含楔形塑性区的裂尖钝化是裂纹迟滞的主要原因．过载引入的塑性区内残余应力对裂纹迟滞也起了重要作用．论文利用Dugdale模型计算了塑性区尺寸，使用基于残余应力的Wheeler模型对过载迟滞进行了很好的拟合．     

A coupled immersed boundary‐lattice Boltzmann method with smoothed point interpolation method for fluid‐structure interaction problems

The immersed boundary‐lattice Boltzmann method has been verified to be an effective tool for fluid‐structure interaction simulation associated with thin and flexible bodies. The newly developed smoothed point interpolation method (S‐PIM) can handle the largely deformable solids owing to its softened model stiffness and insensitivity to mesh distortion. In this work, a novel coupled method has been proposed by combining the immersed boundary‐lattice Boltzmann method with the S‐PIM for fluid‐structure interaction problems with large‐displacement solids. The proposed method preserves the simplicity of the lattice Boltzmann method for fluid solvers, utilizes the S‐PIM to establish the realistic constitutive laws for nonlinear solids, and avoids mesh regeneration based on the frame of the immersed boundary method. Both two‐ and three‐dimensional numerical examples have been carried out to validate the accuracy, convergence, and stability of the proposed method in consideration of comparative results with referenced solutions.