利用声波控制超短脉冲的色散

 声光互作用器件声光可编程色散滤波器（AOPDF）是一种实时的色散补偿器件，它可用于飞秒啁啾脉冲放大系统。通过耦合模理论推导，得到了输出脉冲的群延迟与调制声波的频率、啁啾、带宽等参数的关系，并且对用2.5cm长的LiNbO₃作为声光晶体的AOPDF补偿飞秒光脉冲的色散进行了数值模拟，得到了对中心波长为800 mm的钛宝石飞秒激光色散补偿特性及所需声波的频率和啁啾参数。     

Fully-developed pipe and planar flows of multimode viscoelastic fluids

Two solutions are presented for fully-developed pipe and planar flows of multimode viscoelastic models. The fluids have a Newtonian solvent contribution and the polymer modes are described by the Phan-Thien—Tanner (PTT), the FENE-P or the Giesekus equation. The first solution is exact and can handle any number of modes, but is only semi-analytical. The second solution, which is presented only for the PTT model with a linear stress coefficient and the FENE-P model, can also handle any number of modes. It is based on a truncated series expansion and is completely analytical, but provides only an approximated solution. The complexity of the multimode solutions is investigated first with the exact semi-analytical method and it is shown that at high Deborah number flows the high-order stresses can become as important as the stress of the first mode. It is also under these conditions that the approximated analytical solution deviates from the exact semi-analytical solution. A criterion for the accurate use of the approximated solution is presented. Fortran codes are provided to obtain these solutions at the internet address at the end.     

Preparation and evaluation of a large-volume radial flow monolithic column

In this study, a 38 mL monolith with homogeneous porous structure was produced by a single polymerization from glycidyl methacrylate (GMA) and ethylene dimethacrylate (EDMA) in the presence of porogens and an initiator. The uniform temperature distribution within the reaction system was achieved by adding reactant mixture continuously and enhancing the heat transfer ability of the polymerization system. Homogeneous porous structure in the monolith was proved by SEM and the pore size distribution profiles measured by mercury intrusion porosimetry. Experimental results from proteins separation indicated that the dynamic capacity and resolution of radial flow monolithic column were independent of flow rates. Furthermore, the pressure drop on the column was linearly dependent on the flow rate and did not exceed 1.7 MPa even at a flow rate of 50 mL/min, which proved that the prepared monolith could be used in the quick separation and preparation of biopolymers.     

Metal-Organic Frameworks with Novel Catenane-like Interlocking: Metal-Determined Photoresponse and Uranyl Sensing

The assembly of two tripyridinium-tricarboxylate ligands and different metal ions leads to seven isostructural MOFs, which show novel 2D→2D supramolecular entanglement featuring catenane-like interlocking of tricyclic cages. The MOFs show tripyridinium-afforded and metal-modulated photoresponsive properties. The MOFs with d¹⁰ metal centers ( 1-Cd , 1-Zn , 2-Cd , 2-Zn ) show fast and reversible photochromism and concomitant fluorescence quenching, 1-Ni displays slower photochromism but does not fluoresce, and 1-Co and 2-Co are neither photochromic nor fluorescent. It is shown here that the network entanglement dictates donor-acceptor close contacts, which enable fluorescence originated from interligand charge transfer. The contacts also allow photoinduced electron transfer, which underlies photochromism and concomitant fluorescence response. The metal dependence in fluorescence and photochromism can be related to energy transfer through metal-centered d-d transitions. In addition, 1-Cd is demonstrated to be a potential fluorescence sensor for sensitive and selective detection of UO₂²⁺ in water.     

Vibrational spectroscopy in the development of surface hydrophilic elastomer latex (SHEL)

An illustrative example is given to show how various vibrational spectroscopy techniques coupled with two-dimensional (2D) correlation analysis can be effectively utilized in the development of a novel and functional material. Surface-hydrophilic elastomer latex (SHEL) is a material exhibiting rather unusual permanently water-wettable surface feature despite having a soft and rubbery bulk property, which can be successfully analyzed with vibrational spectroscopy. 2D photoacoustic (PAS) IR spectra of a SHEL film indicate the localized surface segregation of long-chain ethoxylate moiety of the oligomeric surfactant used in the preparation of this material. The accumulation of the hydrophilic long-chain ethoxylate produces the high energy polar surface over the hydrophobic bulk phase of SBR copolymer. The persistence of very low water contact angle, even after repeated washing of a SHEL film with an excess amount of water, indicates permanent covalent attachment of long-chain ethoxylate group to the SBR copolymer. 2D Raman spectra generated from the process monitoring of the emulsion copolymerization of SHEL reveal the mechanism of the covalent attachment of long-chain ethoxylate. The reaction involves a separate step of oleyl moiety of the block surfactant reacting with 1,3-butadiene prior to the onset of copolymerization to produce the SBR latex product.     

基于COLLATE融合多图谱的心脏电影MRI右心室分割

右心室分割对肺动脉高压等疾病的心功能分析具有重要的临床意义.然而，右心室心肌薄、易变且不规则，其传统的医学图像分割方法仍然未能取得突破性进展.本文提出基于COLLATE（Consensus Level，Labeler Accuracy and Truth Estimation）的多图谱分割方法，首先以归一化互信息为相似测度对目标图像和图谱集进行B样条配准以获取粗分割结果；然后利用COLLATE对粗分割结果进行融合；最后采用基于形状约束的区域生长算法修正出现错误的数据.10例临床心脏磁共振短轴电影图像被用于算法验证.本文还将使用基于COLLATE的多图谱分割方法得到的结果与深度学习算法及手动分割进行了比较.结果显示与深度学习算法比较，使用本文算法得到的射血分数（Ejection Fraction，EF）与手动分割更加一致和相关，表明该算法的分割结果有望辅助临床心脏功能诊断.     

A field-reversal method for measuring the parameters of a ferroelectric liquid crystal

A method for measuring the spontaneous polarization P _s, the switching time, the rotational viscosity γ_φ, and the d.c. conductivity σ is presented. The possibilities of estimating the azimuthal angle φ₀, the dielectric anisotropy δε and the dielectric permittivity ε_⊥ in the same experiment are also discussed. It is explicitly shown that the switching delay, though primarily dependent on the material and the applied field, is also dependent on the geometry of the cell.     

超越SNOM探针通光孔径尺寸的金属纳米间隙超分辨测量

采用电磁场有限元方法,数值模拟了孔径型扫描近场光学显微镜(aperture Scanning Near-field Optical Microscopy,a-SNOM)在照明模式下的工作过程.针对金偶极天线结构,改变天线长度和纳米间隙尺寸,计算了a-SNOM探针孔径的远场辐射速率随探针端面中心坐标变化的扫描曲线,实现了超越a-SNOM探针通光孔径尺寸的天线金属纳米间隙的超分辨测量,对于100nm通光孔径的探针,可分辨最小尺寸为10nm(0.016倍波长)的金属间隙.通过对比金属和介质偶极天线的a-SNOM探针远场辐射速率测量的计算结果,表明天线金属纳米间隙的超分辨测量的实现是由于金属间隙表面等离激元的激发.     

Purification of low-abundance lysozyme in egg white via free-flow electrophoresis with gel-filtration chromatography

As an effective separation tool, free-flow electrophoresis has not been used for purification of low-abundance protein in complex sample matrix. Herein, lysozyme in complex egg white matrix was chosen as the model protein for demonstrating the purification of low-content peptide via an FFE coupled with gel fitration chromatography (GFC). The crude lysozyme in egg while was first separated via free-flow zone electrophoresis (FFZE). After that, the fractions with lysozyme activity were condensed via lyophilization. Thereafter, the condensed fractions were further purified via a GFC of Sephadex G50. In all of the experiments, a special poly(acrylamide- co-acrylic acid) (P(AM-co-AA)) gel electrophoresis and a mass spectrometry were used for identification of lysozyme. The conditions of FFZE were optimized as follows: 130 μL/min sample flow rate, 4.9 mL/min background buffer of 20 mM pH 5.5 Tris-Acetic acid, 350 V, and 14 °C as well as 2 mg/mL protein content of crude sample. It was found that the purified lysozyme had the purity of 80% and high activity as compared with its crude sample with only 1.4% content and undetectable activity. The recoveries in the first and second separative steps were 65% and 82%, respectively, and the total recovery was about 53.3%. The reasons of low recovery might be induced by diffusion of lysozyme out off P(AM-co-AA) gel and co-removing of high-abundance egg ovalbumin. All these results indicated FFE could be used as alternative tool for purification of target solute with low abundance.     

CdBiO2NO3, a new layered bismuth oxide nitrate

Step-wise reaction of CdO, Bi₂O₃, and Cd(NO₃)₂^·4H₂O leads to formation of a novel bismuth oxide nitrate, CdBiO₂NO₃, which completes the family of bismuthite-like M^IIBiO₂NO₃ oxide nitrates. The new compound is tetragonal, I4/mmm, a = 3.9486(1)Å, c = 14.2235(2)Å; its crystal structure resembles those of PbBiO₂NO₃ and CaBiO₂NO₃, except for, probably, different positioning of the nitrate group. The compound is stable until ∼425 °C when it decomposes, in one step, into CdO and a mixture of Bi–Cd oxides. Cd-based analogs of isostructural PbLnO₂NO₃ (Ln – lanthanides) oxide nitrates are unlikely to exist. We discuss the similarities and differences in the structures of layered oxyhalides and oxynitrates of bismuth and rare-earths.