Bifunctional catalysis of Mo/HZSM-5 in the dehydroaromatization of methane with CO/CO2 to benzene and naphthalene

The catalytic dehydrocondensation of methane to aromatics such as benzene and naphthalene was studied on the Mo carbide catalysts supported on micro- and mesoporous materials such as HZSM-5 (0.6 nm) and FSM-16 (2.7 nm). The Mo catalysts supported on H-ZSM-5 having appropriate micropores (0.6 nm size) and Si/Al ratios (20-70) exhibit higher yields (90-150 nmol/g-cat/s) and selectivities (higher than 74% on the carbon basis) in methane conversion to aromatic products such as benzene and naphthalene at 973 K and 1 atm, although they are drastically deactivated because of substantial coke formation. It was demonstrated that the CO/CO₂ addition to methane effectively improves the catalyst performance by keeping a higher methane conversion and selectivities of benzene formation in the prolonged time-on-stream. The oxygen derived from CO and CO₂ dissociation suppresses polycondensation of aromatic products and coke formation in the course of methane conversion. XAFS and TG/DTA/mass-spectrometric studies reveal that the zeolite-supported Mo oxide is endothermally converted under the action of methane around 955 K to nanosized particles of molybdenum carbide (Mo₂C) (Mo-C, coordination number = 1,R- 2.09 å; Mo-Mo, coordination number = 2.3–3.5;R = 2.98 å). The SEM pictures showed that the nanostructured Mo carbide particles are highly dispersed on and inside the HZSM-5 crystals. On the other hand, it was demonstrated by IR measurements of pyridine adsorption that the Mo/HZSM-5 catalysts having the optimum SiO₂/Al₂O₃ ratios around 40 show the maximum Brönsted acidity among the catalysts with the SiO₂/Al₂O₃ ratios of 20–1900. There is a close correlation between the activity of benzene formation in the methane aromatization and the Brönsted acidity of HZSM-5 due to the bifunctional catalysis.     

The Greatest Lower Bound of a Boros–Moll Sequence

Mathematical Notes - The Boros–Moll polynomials $$P_m(a)$$ arise in the evaluation of a quartic integral. In the past few years, there has been some remarkable research on the properties of...     

The Josephson effect in superconductors with heavy Fermions

The Josephson effect between a usual superconductor with even-parity pairing and a heavy-Fermion superconductor with odd-parity pairing would not be zero. Instead, due to spin-orbit coupling it would be of relative magnitude a/Ξ_o compared to the effect between two even-parity superconductors. a/Ξ_o, the ratio of lattice constant to pair size, is comparable to 0.1 for heavy-Fermion superconductors. Recent claims, that with strong spin-orbit coupling the even-parity to odd-parity Josephson effect should be of order unity times the even-even effect, are shown to be incorrect.     

ZnO纳米管有序阵列与Cu2O纳米晶核壳结构的光电化学性能及全固态纳米结构太阳电池研究简

采用电化学方法在铟锡氧化物(ITO)导电玻璃基底上制备了高度有序的ZnO纳米管阵列,然后在ZnO纳米管阵列上电化学沉积Cu2O纳米晶颗粒,获得了一维有序Cu2O/ZnO核壳式纳米阵列结构,通过控制Cu2O纳米晶的沉积电量得到不同厚度的Cu2O壳层,并对该核壳式纳米阵列的形貌和结构进行了分析. 以Cu2O/ZnO一维核壳式纳米阵列结构为光电极组装全固态纳米结构太阳电池,研究了Cu2O壳层厚度对光电极光吸收性能、光电性能以及组装电池光伏性能的影响,优化了电池中对电极材料的喷金厚度. 结果表明,以Cu2O沉积电量为1.5 C的Cu2O/ZnO为光活性层,以4 mA电流下真空镀金20~25 min的铜基底为对电极组装的简易太阳电池最高可获得0.013%的光电转换效率.     

4-甲基-4-氮杂-21E-苯亚甲基-5-孕烯-3,20-二酮类化合物的合成

报道了一种以KF/Al_2O_3催化合成4-甲基-4-氮杂-21E-苯亚甲基-5-孕烯-3,20-二酮类化合物的方法。以黄体酮为原料,经NaIO_4/KMnO_4氧化裂解、胺解关环得到重要中间体4-甲基-4-氮杂-5-孕烯-3,20-二酮,后者在KF/Al_2O_3催化下经克莱森缩合得到目标产物。考察了不同的催化剂、反应温度、催化剂用量对目标产物的影响。条件优化的结果为:n(3)∶n(KF/Al_2O_3)=1∶1,回流状态下反应4 h,产率为56%~68%。此方法适用性好,为4-氮杂甾体苯亚甲基衍生物的合成提供了一种方便而有效的方法。     

量子点PbS修饰纳米结构TiO2复合膜的光电化学研究

用光电流作用谱、光电流-电势图等光电化学方法研究了ITO(铟锡氧化物导电玻璃)/TiO₂ /Q-PbS(量子点PbS)膜电极的光电转换性质。结果表明，由于量子尺寸的效应，在膜电极制备中，随着ITO/TiO₂电极在饱和Pb(CH₃COO)₂溶液中浸泡时间的不同，所制备的Q-PbS颗粒大小不同，禁带宽度随着浸泡时间的增大而减小，浸泡时间为40 s、在80 ℃烘干下制备的Q-PbS的禁带宽度为1.68 eV，其价带位置为-5.072 eV。Q-PbS修饰ITO/TiO₂电极可使光电流发生明显的红移，从而提高宽禁带半导体的光电转换效率。     

TiO2与ZnO复合纳米结构电极的光电化学研究

利用尿素加压共沉淀法以Ti(SO4)2与Zn(NO3)2为原料制备了TiO2-ZnO复合纳米粒子, 其纳米结构电极的光电化学研究结果表明, 反应物摩尔比为3∶1, 于530 ℃煅烧制备的复合纳米结构电极的光电转换效率最高. 对吸附染料RuL2(SCN)2∶2TBA的纳米结构TiO2和各种复合纳米粒子的纳米结构电极进行光电研究的结果表明, 染料对各纳米结构电极都起到了敏化作用, 其中也是由反应物摩尔比为3∶1, 于530 ℃煅烧制备的纳米结构电极的光电转换效率最高. 对聚3-甲基噻吩修饰的纳米结构TiO2和摩尔比为3∶1, 于530 ℃煅烧的复合纳米粒子构成的纳米结构电极进行光电性能研究, 结果表明, 聚3-甲基噻吩与半导体纳米粒子之间存在p-n结, 在一定条件下p-n结的存在有利于光生电子/空穴的分离, 从而提高了光电转化效率.     

紫外光固化超支化聚酯的合成及性能

以季戊四醇为核,2,2-羟甲基丙酸为臂,采用熔融缩聚法合成并表征了末端含大量羟基的超支化聚酯,其支化度高,黏度低,具有良好的热稳定性.以甲基丙烯酸酐改性超支化聚酯,得到链末端含有C=C的超支化甲基丙烯酸酯,在最佳反应条件下改性反应的转化率可达89%以上.改性后的超支化聚酯表现出更低的黏度,热失重曲线呈现为两段,玻璃态转...     

热力学变化过程方向的完整判据

目前物理化学教科书中的自发过程方向与限度判据,只能对常见自发过程作判断,不能对含有非体积功的各类过程做出判断。笔者从热力学第二定律的理论基础克劳修斯不等式入手,通过自发变化熵判据的演绎过程,找到了3个判据不完整性的原因所在,给出了完整方向性判据的解决方案。应用表明,完整的方向与限度判据可适用于各类热力学变化过程。     

制备二氧化钛分枝纳米棒阵列结构以提高聚合物杂化太阳电池的性能

分别采用一步水热法和两步水热法在导电玻璃(FTO)上制备了二氧化钛(TiO₂)纳米棒(NR)阵列和TiO₂分枝纳米棒(B-NR)阵列。 利用低温化学浴沉积法(CBD)在TiO₂纳米棒阵列(NRA)和TiO₂分枝纳米棒阵列(B-NRA)基底上沉积Sb₂S₃纳米粒子(NPs)。 接着分别旋涂聚-3已基噻吩(P3HT)和2,2'7,7'-四-(二甲氧基二苯胺)螺芴(Spiro-OMeTAD)组装成TiO₂(NRA)/Sb₂S₃/P3HT/Spiro-OMeTAD和TiO₂(B-NRA)/Sb₂S₃/P3HT/ Spiro-OMeTAD为光活性层的杂化太阳电池。 结果表明,由TiO₂(NRA)/Sb₂S₃/P3HT/Spiro-OMeTAD复合膜结构组装的杂化太阳电池的光电转换效率(PCE)是2.92%,而由TiO₂(B-NRA)/Sb₂S₃/P3HT/Spiro-OMeTAD复合膜结构组装的杂化太阳电池的PCE提高到了4.67%。