Oscillating viscoelastic flow in a curved duct—Exact analytical and numerical solution

The analytical solution of the equations of motion is presented for a fully developed laminar flow in a curved channel with circular walls, when an oscillating circumferential pressure gradient is imposed (finite gap oscillating Dean flow). The fluid studied, is a viscoelastic (Jeffrey) fluid. The validity of the solution is verified by a finite difference numerical method.     

Manufacturing lead-time rules: Customer retention versus tardiness costs

Inaccurate production backlog information is a major cause of late deliveries, which can result in penalty fees and loss of reputation. We identify conditions when it is particularly worthwhile to improve an information system to provide good lead-time information. We first analyze a sequential decision process model of lead-time decisions at a firm which manufactures standard products to order, and has complete backlog information. There are Poisson arrivals, stochastic processing times, customers may balk in response to quoted delivery dates, and revenues are offset by tardiness penalties. We characterize an optimal policy and show how to accelerate computations. The second part of the paper is a computational comparison of this optimum (with full backlog information) with a lead-time quotation rule that is optimal with statistical shop-status information. This reveals when the partial-information method does well and when it is worth implementing measures to improve information transfer between operations and sales.     

Multi-layer thin films/substrate system subjected to non-uniform misfit strains

Current methodologies used for the inference of thin film stress through curvature measurement are strictly restricted to stress and curvature states that are assumed to remain uniform over the entire film/substrate system. These methodologies have recently been extended to a single layer of thin film deposited on a substrate subjected to the non-uniform misfit strain in the thin film. Such methodologies are further extended to multi-layer thin films deposited on a substrate in the present study. Each thin film may have its own non-uniform misfit strain. We derive relations between the stresses in each thin film and the change of system curvatures due to the deposition of each thin film. The interface shear stresses between the adjacent films and between the thin film and the substrate are also obtained from the system curvatures. This provides the basis for the experimental determination of thin film stresses in multi-layer thin films on a substrate.     

Seeded growth of AlN on N- and Al-polar 〈0001〉 AlN seeds by physical vapor transport

We demonstrated seeded growth of AlN on large-area Al- and N-polar <0 0 0 1>-oriented AlN seeds using the physical vapor transport method (PVT). In both cases, crystals having a diameter of 15 mm were obtained from 5 mm seeds. Based on growth step and terrace width analyses, it was found that the N-polar face was suitable for growth within a large window of growth parameters while the Al-polar seeds yielded high-quality crystals only at low supersaturation.     

Fully-developed pipe and planar flows of multimode viscoelastic fluids

Two solutions are presented for fully-developed pipe and planar flows of multimode viscoelastic models. The fluids have a Newtonian solvent contribution and the polymer modes are described by the Phan-Thien—Tanner (PTT), the FENE-P or the Giesekus equation. The first solution is exact and can handle any number of modes, but is only semi-analytical. The second solution, which is presented only for the PTT model with a linear stress coefficient and the FENE-P model, can also handle any number of modes. It is based on a truncated series expansion and is completely analytical, but provides only an approximated solution. The complexity of the multimode solutions is investigated first with the exact semi-analytical method and it is shown that at high Deborah number flows the high-order stresses can become as important as the stress of the first mode. It is also under these conditions that the approximated analytical solution deviates from the exact semi-analytical solution. A criterion for the accurate use of the approximated solution is presented. Fortran codes are provided to obtain these solutions at the internet address at the end.     

Highly reflective AlGaAsSb/InP Bragg reflector at 1.55 μm grown by MOVPE

The metalorganic vapor-phase epitaxy growth of a highly reflective 24-pair AlGaAsSb/InP-distributed Bragg reflector (DBR) is reported for the first time. The influence of the growth parameters such as the V/III input ratio, the growth temperature and the pressure, the total H₂ flow, the gas velocity and the switching sequence of the source gases at the interfaces has been deeply investigated and optimized to achieve stable growth conditions. The DBR achieves a reflectivity as high as 99.5% around 1.55 μm, a uniform stable composition, and an excellent crystal quality over the 2 inch wafer, with a surface free of crosshatch and a defect density below 1/cm². For the optical characterizations, measurements of linear and nonlinear reflectivity, transmission, pump-probe and photoluminescence were done. The interfaces and bulk layers of InP/AlGaAsSb/InP heterostructures were analyzed by transmission electron microscopy. High resolution X-ray diffraction measurements were used to determine the composition shift in the growth plane of the DBR. The measurements show the high quality of the growth and demonstrate that thick AlGaAsSb/InP heterostructures can be grown by metalorganic vapor-phase epitaxy (MOVPE), and in particular DBRs above 1.31 μm.     

Nonlinear transient analysis of moderately thick laminated composite sector plates

This study presents a simple formulation for the nonlinear dynamic analysis of shear-deformable laminated sector plates made up of cylindrically orthotropic layers. The non-axisymmetric formulation in cylindrical coordinates is discretized in space domain using two-dimensional Chebyshev polynomials. Houbolt time marching is used for temporal discretization. Quadratic extrapolation is used for linearization along with fixed-point iteration for obtaining the results. Several combinations of simply supported, clamped and free edge conditions are considered. Convergence study has been carried out and the results are compared with the results of square plates. Effects of boundary conditions, moduli ratio, lamination scheme, sector angle and annularity on the transient deflection response are plotted graphically. Transient responses are compared for step, saw-tooth and sinusoidal loadings.     

Vortex ring generation due to the coalescence of a water drop at a free surface

 Results are presented of an experimental investigation of vortex ring formation by a fluid drop contacting a free surface with negligible velocity. The pool fluid is mixed with fluorescein dye, and a laser sheet is used to illuminate a plane of the flow. A series of representative images is recorded by a CCD camera and speculation is made regarding specific sources of vorticity flux through the free surface. Two scaling analyses previously presented by other investigators are demonstrated to be equivalent under the assumptions of this experiment, and they provide the motivation for a series of test runs in which the duration of the coalescence process, τ_*, is related to variations in drop diameter L and fluid surface tension σ. Experimental results are in agreement with the analyses, showing τ_*∼σ^-1/2 and τ_*∼L ^3/2. Received: 22 December 1995 / Accepted: 15 October 1996