Preparation of mesoporous TiO2/CNT nanocomposites by synthesis of mesoporous titania via EISA and their photocatalytic degradation under visible light irradiation

Stabilized mesoporous TiO₂ was synthesized by evaporation induced self assembly (EISA) method and mechanically incorporated into single-walled carbon nanotubes (SWCNT) with different ratios. The physicochemical properties of the nanocomposites (mesoporous TiO₂/SWCNT) materials were investigated by Brunauer–Emmett–Teller (BET) measurement, X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray (EDX), photoluminescence (PL) and ultraviolet–visible (UV–Vis) spectroscopy measurements. The catalytic activity of mesoporous TiO₂ and nanocomposites were assessed by examining the degradation of rhodamine B as model aqueous solution under visible light. CNTs are facilitating the photocatalytic activity of mesoporous TiO₂ in the degradation of rhodamine B efficiently.     

Embedded passivated-electrode insulator-based dielectrophoresis (EπDEP)

Here, we introduce a new technique called embedded passivated-electrode insulator-based dielectrophoresis (EπDEP) for preconcentration, separation, or enrichment of bioparticles, including living cells. This new method combines traditional electrode-based DEP and insulator-based DEP with the objective of enhancing the electric field strength and capture efficiency within the microfluidic channel while alleviating direct contact between the electrode and the fluid. The EπDEP chip contains embedded electrodes within the microfluidic channel covered by a thin passivation layer of only 4 μm. The channel was designed with two nonaligned vertical columns of insulated microposts (200 μm diameter, 50 μm spacing) located between the electrodes (600 μm wide, 600 μm horizontal spacing) to generate nonuniform electric field lines to concentrate cells while maintaining steady flow in the channel. The performance of the chip was demonstrated using Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacterial pathogens in aqueous media. Trapping efficiencies of 100 % were obtained for both pathogens at an applied AC voltage of 50 V peak-to-peak and flow rates as high as 10 μl/min.     

Infrared and Raman spectra of magnesium ammonium phosphate hexahydrate (struvite) and its isomorphous analogues. IX: Spectra of protiated and partially deuterated cubic magnesium caesium phosphate hexahydrate

Infrared and Raman spectra of cubic magnesium caesium phosphate hexahydrate, MgCsPO₄·6H₂O (cF100), and its partially deuterated analogues were analyzed and compared to the previously studied spectra of the hexagonal analogue, MgCsPO₄·6H₂O (hP50). The vibrational spectra of the cubic and hexagonal dimorphic analogues are similar, especially in the regions of HOH stretching and bending vibrations. In the difference IR spectrum of the slightly deuterated analogue (<5% D), one distinctive band appears at 2260 cm⁻¹ with a small shoulder at around 2170 cm⁻¹, but only one band is expected in the region of the OD stretchings of isotopically isolated HDO molecules. The small weak band could possibly result from second-order transitions (a combination of HDO bending and some libration of the same species) rather than statistical disorder of the water molecules. By comparing the IR spectra in the region of external vibrations of water molecules of the protiated compound recorded at RT (room temperature) and at LNT (liquid nitrogen temperature) and those in the series of the partially deuterated analogues, it can be stated with certainty that the bands at 924 and 817 cm⁻¹ result from librations of water molecules, rocking and wagging respectively. And the band at 429 cm⁻¹ can be safely attributed to a stretching Mg–O_w mode. In the ν₃(PO₄) and ν₄(PO₄) region in the infrared spectra, one band in each is observed, at 995 and 559 cm⁻¹, respectively. In the region of the ν₁ modes, in the Raman spectrum of the protiated compound, one very intense band was observed at 930 cm⁻¹ which is only insignificantly shifted to 929 cm⁻¹ in the spectrum of the perdeuterated compound. The band at 379 cm⁻¹ in the Raman spectrum could be assigned to the ν₂(PO₄) modes. With respect to the phosphate ion vibrations, the comparison between the two polymorphic forms of MgCsPO₄·6H₂O and their deuterated compounds shows that ν₁(PO₄) and ν₃(PO₄) appear at lower wavenumbers in the cubic phase than in the hexagonal phase. These data are in full agreement with the lower repulsion potential at the cubic lattice sites compared with that for the hexagonal lattice sites.     

化学发光分析与高效液相色谱联用检测酪氨酸

在强碱性条件下,KMnO4氧化酪氨酸产生自由基,自由基氧化Luminol产生强化学发光,酪氨酸浓度与相对发光强度呈线性关系。选用C18反相色谱柱、CH3OH、KH2PO4混合液为流动相,酪氨酸能很好分离。基于此,建立CL-HPLC检测酪氨酸的新方法,线性范围为1.2×10-3～5.0×10-2g/L、线性相关系数为0.9994、RSD为2.37%、检测限为3.3×10-4g/L。方法已于检测实际样品氨基酸口服液,并与UV光度法,结果一致。本文探讨了酪氨酸增强KMnO4-Luminol化学发光机理。     

缺陷金属有机骨架的制备及其去除水中污染物的研究进展

在避免母体结构坍塌的前提下,通过缺陷工程对金属有机骨架(MOFs)进行处理可有效提升其去除水体污染物的性能。目前,通过调整合成条件(温度、金属/配体比例等)、添加调制剂、热处理和金属节点取代等方式可制备缺陷MOFs。粉末X射线衍射(PXRD)、比表面积分析、热重-差热分析(TGA-DSC)、电子顺磁共振(EPR)、X射线光电子能谱(XPS)、高分辨率透射电子显微镜(HR-TEM)、球差校正透射电镜(AC-TEM)和X射线吸收光谱(XAS)表征技术可证实MOFs中缺陷的特征。相比原始MOFs,从光催化等高级氧化的角度来看,构造缺陷型MOFs可促进电子转移、减小带隙以提升其高级氧化降解去除污染物的性能。此外,缺陷型MOFs还可为污染物提供更多吸附位点,进一步提升吸附剂的吸附容量和吸附速率。本文系统总结缺陷MOFs的制备方法、现有常见表征技术及其在水处理领域中的应用。同时,本文还根据缺陷MOFs用于去除水中污染物的研究现状对其今后发展予以展望。     

Removal of uranium from aqueous solution by using activated palm kernel shell carbon: adsorption equilibrium and kinetics

Activated palm kernel shell carbon (APKSC) was used to remove U(VI) from aqueous solutions in a batch system. The adsorption kinetics, isotherms, and effects of various parameters, such as temperature, contact time, solution pH, adsorbent dosage, and initial U(VI) concentration on the U(VI) adsorption process were studied. Equilibrium was reached after 120 min in the range of studied U(VI) concentrations and temperatures. U(VI) uptake was insignificantly affected by temperature, but was highly pH dependent, and the optimum pH for removal was 5.5. U(VI) removal efficiency increased with the increasing adsorbent dosage. U(VI) sorption capacity increased with increasing initial U(VI) concentration; any further increases in initial U(VI) concentration above a certain point caused insignificant changes in U(VI) sorption capacity. Isotherm data could be described by the Langmuir isotherm model with a maximum U(VI) adsorption capacity of 51.81 mg/g. Kinetic data were fitted to pseudo-first-order and pseudo-second-order equations, which suggested that the U(VI) adsorption onto APKSC was better reproduced by the pseudo-second-order model rather than pseudo-first-order model. Our results indicated that APKSC might be used as a cheap adsorbent in the treatment of uranium-containing wastewater.     

Preparation of electrically enhanced forward osmosis (FO) membrane by two-dimensional MXenes for organic fouling mitigation

In this work, a conductive thin film composite forward osmosis (TFC-FO) membrane was firstly prepared via vacuum filtering MXenes nanolayer on the outer surface of polyethersulfone membrane followed by interfacial polymerization in the other side. Moreover, its feasibility of mitigating organic fouling under electric field was evaluated. Results indicated that the addition of MXenes greatly reduced the electric resistance of membrane from 2.1 × 10¹² Ω to 46.8 Ω, enhanced the membrane porosity and promoted the membrane performance in terms of the ratio of water flux to reverse salt flux. The modified TFC-FO membrane presented the optimal performance with 0.47 g/m² loading amount of MXenes. Organic fouling experiments using sodium alginate (SA) and bovine serum albumin (BSA) as representative demonstrated that the introduction of MXenes could effectively enhance the anti-fouling ability of TFC-FO membrane under the electric field of 2 V. The interelectron repulsion hindered organic foulants attaching into membrane surface and thus effectively alleviated the membrane fouling. More importantly, the modified TFC-FO membrane showed good stability during the fouling experiment of 10 h. In all, our work proved that introducing MXenes into the porous layer of support is feasible to alleviate organic fouling of FO membrane.     

Photocatalytic removal of tetracycline by a Z-scheme heterojunction of bismuth oxyiodide/exfoliated g-C3N4: performance,mechanism, and degradation pathway

Antibiotics, once being released into the environment, become recalcitrant organic pollutants, which pose a potential risk to ecological balance and human health. In this study, a Z-scheme heterojunction of bismuth oxyiodide (BiOI)/exfoliated g-C₃N₄ (BiOI/ECN hereafter) was synthesized by the combination of thermal exfoliation of g-C₃N₄ and chemical precipitation of BiOI for efficient photocatalytic degradation of tetracycline in aqueous solutions under visible light irradiation. The optimized BiOI/ECN delivered an outstanding degradation rate at circa 0.0705 min^?1, which was 10 times higher than that of the bulk g-C₃N₄. The photocatalytic degradation efficiency of tetracycline remained almost unchanged in a pH range of 3–11, and the BiOI/ECN displayed an excellent photostability upon recycled usage. The photocatalytic mechanism of tetracycline was ascribed to the main reactive oxidation species of photogenerated holes and superoxide radicals. In addition, the possible degradation pathways of tetracycline were investigated by HPLC-MS to identify intermediates. The toxicity of photocatalytic-generated intermediates of tetracycline was found significantly alleviated according to the calculation of quantitative structure–activity relationship prediction. This work not only provides an attractive photocatalyst for the removal of tetracycline but also opens a new avenue for rational design of Z-scheme heterojunction composites for tetracycline degradation.     

Identification of key classification features of early cervical squamous cell carcinoma

Despite the tremendous progress in molecular analysis of pan-cancer, little is known regarding molecular classification of cervical squamous cell carcinoma. In this study, we adopted a multi-omics approach to identify potential key classification features of cervical squamous cell carcinoma. Specifically, we analyzed mRNA, and microRNA (miRNA) expression data, as well as DNA methylation and copy number variation in cervical squamous cell carcinoma cases, using datasets obtained from The Cancer Genome Atlas (TCGA). Moreover, we identified molecules in each dimension, as well as integrated and clustered filtered classification features, and used them to distinguish different subtypes. The resulting key classification features were used to establish a classification model for cervical squamous cell carcinoma. Our results revealed two cervical squamous cell carcinoma subtypes, with significant differences across clinical survival levels, as well as 8 key classification features of cervical squamous cell carcinomas. These findings are expected to provide important references for early classification of cervical squamous cell carcinoma and identification of classification markers.