Quantitative measurements of micro- and macromixing in a stirred vessel using Planar Laser-Induced Fluorescence

The Planar Laser-Induced Fluorescence (PLIF) technique enables measurement of the local degree of deviation in an arbitrary plane inside the mixing vessel. This is achieved by injecting a mixture of an inert dye and a reacting fluorescent into the vessel. The inert dye serves as a tracer for the macromixing. The fluorescent characteristics of the reacting dye change while undergoing a fast chemical reaction with the vessel content and it therefore shows the micromixing indirectly. The concentration fields of the dyes are measured simultaneously. For that a laser beam is expanded into a thin light sheet which illuminates an arbitrary plane in the mixing vessel, exciting the fluorescent dye in this area. The emitted light is detected by a CCD-camera which is positioned vertical to the measurement plane. The fluorescent light passes through two optical filters which are suitable for separating the fluorescent light of the two dyes. The light is then projected on half of the camera chip each so that the same display window is detected twice, and thus the local concentration of the two dyes can be measured simultaneously. Low Reynolds number measurements are performed in a mixing vessel equipped with a Rushton turbine. The lamellar structure is clearly resolved. Areas of micromixing are detected by calculating the local degree of deviation from the concentration fields. These areas are mainly found in the boundary layer of the lamellas.     

Primes in quadratic progressions on average

In this paper, we establish a theorem on the distribution of primes in quadratic progressions on average.     

Constructing orthogonal pandiagonal Latin squares and panmagic squares from modular n‐queens solutions

In this article, we show how to construct pairs of orthogonal pandiagonal Latin squares and panmagic squares from certain types of modular n‐queens solutions. We prove that when these modular n‐queens solutions are symmetric, the panmagic squares thus constructed will be associative, where for an n × n associative magic square A = (a_ij), for all i and j it holds that a_ij + an?i?1,n?j?1 = c for a fixed c. We further show how to construct orthogonal Latin squares whose modular difference diagonals are Latin from any modular n‐queens solution. As well, we analyze constructing orthogonal pandiagonal Latin squares from particular classes of non‐linear modular n‐queens solutions. These pandiagonal Latin squares are not row cyclic, giving a partial solution to a problem of Hedayat. © 2007 Wiley Periodicals, Inc. J Combin Designs 15: 221–234, 2007     

Examples of non-Kähler Hamiltonian circle manifolds with the strong Lefschetz property

In this paper we construct six-dimensional compact non-Kähler Hamiltonian circle manifolds which satisfy the strong Lefschetz property themselves but nevertheless have a non-Lefschetz symplectic quotient. This provides the first known counterexamples to the question whether the strong Lefschetz property descends to the symplectic quotient. We also give examples of Hamiltonian strong Lefschetz circle manifolds which have a non-Lefschetz fixed point submanifold. In addition, we establish a sufficient and necessary condition for a finitely presentable group to be the fundamental group of a strong Lefschetz manifold. We then use it to show the existence of Lefschetz four-manifolds with non-Lefschetz finite covering spaces.     

Mössbauer effect study of the decagonal quasicrystal Al65Co15Cu20

The ⁵⁷Fe Mössbauer effect study at 5.0 K and in an external magnetic field of 9.0 T on a high-quality stable decagonal quasicrystal Al₆₅Co₁₅Cu_19.9Fe_0.1 is presented. It is shown that the iron atoms are located in two distinct classes of sites. The values of the principal component of the electric field gradient tensor and the asymmetry parameter at these sites are, respectively, ?1.90(10)?×?10²¹ V/m², 0.97(15) and ?3.95(12)?×?10²¹ V/m², 0.00(17).     

Time dependent analysis of finite buffer fluid flows and risk models with a dividend barrier

Based on the matrix-analytic approach to fluid flows initiated by Ramaswami, we develop an efficient time dependent analysis for a general Markov modulated fluid flow model with a finite buffer and an arbitrary initial fluid level at time 0. We also apply this to an insurance risk model with a dividend barrier and a general Markovian arrival process of claims with possible dependencies in successive inter-claim intervals and in claim sizes. We demonstrate the implementability and accuracy of our algorithms through a set of numerical examples that could also serve as test cases for comparing other solution approaches.      

A Markov model of financial returns

We address the general problem of how to quantify the kinematics of time series with stationary first moments but having non stationary multifractal long-range correlated second moments. We show that a Markov process is sufficient to model important aspects of the multifractality observed in financial time series and propose a kinematic model of price fluctuations. We test the proposed model by analyzing index closing prices of the New York Stock Exchange and the DEM/USD tick-by-tick exchange rates obtained from Reuters EFX. We show that the model captures the characteristic features observed in actual financial time series, including volatility clustering, time scaling and fat tails in the probability density functions, power-law behavior of volatility correlations and, most importantly, the observed nonuniversal multifractal singularity spectrum. Motivated by our finding of strong agreement between the model and the data, we argue that at least two independent stochastic Gaussian variables are required to adequately model price fluctuations.     

Dynamic load balancing in parallel queueing systems: Stability and optimal control

We consider a system of parallel queues with dedicated arrival streams. At each decision epoch a decision-maker can move customers from one queue to another. The cost for moving customers consists of a fixed cost and a linear, variable cost dependent on the number of customers moved. There are also linear holding costs that may depend on the queue in which customers are stored. Under very mild assumptions, we develop stability (and instability) conditions for this system via a fluid model. Under the assumption of stability, we consider minimizing the long-run average cost. In the case of two-servers the optimal control policy is shown to prefer to store customers in the lowest cost queue. When the inter-arrival and service times are assumed to be exponential, we use a Markov decision process formulation to show that for a fixed number of customers in the system, there exists a level S such that whenever customers are moved from the high cost queue to the low cost queue, the number of customers moved brings the number of customers in the low cost queue to S. These results lead to the development of a heuristic for the model with more than two servers.     

Mixed conducting perovskite-like ceramics on the base of lanthanum gallate

Ceramic perovskite solid solutions (La_0.9Sr_0.1)[(Ga_1−xM_x)_0.8Mg_0.2]O_3−y, 0 ≤ x ≤ 0.5, M = Fe, Ni, Cr (systems I–III) and brownmillerite solid solutions (La_0.2Sr_1.8)[Ga(Fe_1−xMg_x)]O_5−z, 0 ≤ x ≤ 0.5, (system IV) have been prepared. The samples have been studied by X-ray diffraction and electron microscopy methods, dielectric spectroscopy and permeability measurements. The correlation between the composition, unit cell parameter changes, electrical transport and oxygen permeation properties has been revealed. Introduction of transition metals (Fe, Ni, or Cr), substituting for gallium, ensures the enhancement of the electronic constituent of the conductivity in the perovskite systems I–III. Stabilization of the transition metal high valence states 4+ or 5+ has been suggested for compositions I and III. This leads to a unit cell volume contraction and provides a decrease in the concentration of oxygen vacancies. The oxygen permeability reaches its maximum values in compositions I–III with x ∼ 0.3. On the contrary, increasing concentration of the doping element with lower valence state (magnesium), substituting for iron, determines the expansion of the brownmillerite unit cell volume and provides an increase of the oxygen vacancy concentration, which in turn, favors the enhancement of oxygen permeability of composition IV.