The mechanism of formation of volatile hydrides by tetrahydroborate(III) derivatization: A mass spectrometric study performed with deuterium labeled reagents

In order to clarify the mechanism of hydride formation, the isotopic composition of arsine, stibine, bismuthine, germane, stannane and hydrogen selenide formed by derivatization with either NaBD₄ (TDB) or NaBH₄ (THB) with inorganic As(III), Sb(III), Bi(III), Ge(IV), Sn(IV) and Se(IV) in aqueous reaction media and under various reaction conditions was determined. Batch hydride generation and gas chromatography–mass spectrometry (GC–MS) were employed. The analyte, present in 0.5–5 ml of acid solution (0.1–10 M in HCl or HNO₃ or HClO₄) was derivatized with 1 ml of 0.25–0.5 M TDB / THB in 0.1 M NaOH solution. For TDB derivatization in H₂O reaction media, almost pure BiD₃ and SbD₃ were always obtained for Bi(III) and Sb(III). Nearly pure AsD₃ could be obtained only under some reaction conditions. In general, for As(III), the isotopic composition of the arsines depends strongly on reaction conditions and included all possible AsH_nD_3−n from almost pure AsD₃ to almost pure AsH₃. For Ge(IV) and Sn(IV), the isotopic composition of generated GeH_nD_4−n and SnH_nD_4−n depends on reaction conditions, but pure GeD₄ and SnD₄ could never be obtained. Pure H₂Se was obtained in all cases, independent of reaction conditions. The occurrence of side reactions involving D–H exchange in TBD during its hydrolysis and before the derivatization step, as well as on recently formed hydrides following derivatization was investigated. D–H exchange in TDB during acid hydrolysis appears to occur to a limited extent. Amongst the hydrides, H₂Se undergoes H–D exchange whereas germane and stannane do not exchange at all. Arsine undergoes D–H exchange at elevated acidities (pH < 0) whereas stibine and bismuthine do not exchange significantly during the generation and stripping steps.A reaction model for hydride generation is proposed accounting for primary reactions giving rise to hydride formation through reaction intermediates, as well as side reactions involving D–H exchange and decomposition of reactive hydroboron species, reaction intermediates and final products. Hydrides are formed by direct hydrogen transfer from boron to the analyte atom, most likely through concerted mechanisms taking place via reaction intermediates.     

Aligning Text and Phonemes for Speech Technology Applications Using an EM-Like Algorithm

A common requirement in speech technology is to align two different symbolic representations of the same linguistic ‘message’. For instance, we often need to align letters of words listed in a dictionary with the corresponding phonemes specifying their pronunciation. As dictionaries become ever bigger, manual alignment becomes less and less tenable yet automatic alignment is a hard problem for a language like English. In this paper, we describe the use of a form of the expectation-maximization (EM) algorithm to learn alignments of English text and phonemes, starting from a variety of initializations. We use the British English Example Pronunciation (BEEP) dictionary of almost 200,000 words in this work. The quality of alignment is difficult to determine quantitatively since no ‘gold standard’ correct alignment exists. We evaluate the success of our algorithm indirectly from the performance of a pronunciation by analogy system using the aligned dictionary data as a knowledge base for inferring pronunciations. We find excellent performance—the best so far reported in the literature. There is very little dependence on the start point for alignment, indicating that the EM search space is strongly convex. Since the aligned BEEP dictionary is a potentially valuable resource, it is made freely available for research use.     

Heat capacities of binary cycloalkane mixtures at 298.15 K

Volumetric heat capacities of the six binary mixtures formed from cyclopentane, cyclohexane, cycloheptane and cyclooctane were determined at 298.15 K in a Picker flow microcalorimeter. Excess heat capacities obtained from the results are compred with the temperature variation of excess enthalpies from the literature.     

Analysis of cyanobacterial toxins by hydrophilic interaction liquid chromatography-mass spectrometry

The combination of hydrophilic interaction liquid chromatography with electrospray mass spectrometry (HILIC-MS) has been investigated as a tool for the analysis of assorted toxins produced by cyanobacteria. Toxins examined included saxitoxin and its various analogues (1-18), anatoxin-a (ATX-a, 19), cylindrospermopsin (CYN, 20), deoxycylindrospermopsin (doCYN, 21), and microcystins-LR (22) and -RR (23). The saxitoxins could be unequivocally detected in one isocratic analysis using a TSK gel Amide-80 column eluted with 65% B, where eluent A is water and B is a 95% acetonitrile/water solution, both containing 2.0 mM ammonium formate and 3.6 mM formic acid. The analysis of ATX-a, CYN and doCYN required 75% B isocratic. Simultaneous determination of 1-21 was also possible by using gradient elution. HILIC proved to be suitable for the analysis of microcystins, but peak shape was not symmetric and it was concluded that these compounds are best analysed using existing reversed-phase methods. The HILIC-MS method was applied to the analysis of field and cultured samples of Anabaena circinalis and Cylindrospermopsis raciborskii. In general, the method proved quite robust with similar results obtained in two different laboratories using different instrumentation.     

Removal of humic matter interference in the determination of Cr(VI) in soil extracts by the diphenylcarbazide method

Alkaline digestion of soil samples, which is recommended for minimizing Cr(III)–Cr(VI) interconversions during the extraction of Cr(VI), may also solubilize humic matter (HM). The latter is responsible for both positive and negative interference in the analysis of Cr(VI) in the extract by the diphenylcarbazide (DPC) method. Humic compounds indeed absorb light at 540 nm as the Cr-DPC product and are also able to rapidly reduce Cr(VI) under the pH conditions of the standard DPC method. To prevent any risk of interference and make the DPC method applicable to soil extracts, a new protocol is proposed. This consists of three successive steps: (1) extraction of Cr(VI) by the U.S.EPA method 3060A in the presence of Mg²⁺; (2) batch removal of solubilised HM by the XAD-7 sorbent at pH 3.0 ± 0.1 with 3–5 min contact time; (3) analysis of Cr(VI) with the DPC method at pH 3.0 ± 0.1. The application of this new protocol to the soil product SQC-012 Lot 4 certified by R.T. Corporation (RTC, USA) gave significantly lower Cr(VI) concentrations and smaller variability compared to certified values (46.5 ± 2.3 instead of 153 ± 32.6 mg/kg). The new protocol was validated by Cr(VI) and Cr(III) spikes either to the soil/extractant suspension or to the exctract. Cr(VI) results in the wide range of acceptance limits (104–202 mg/kg) reported by RTC were only obtained when the U.S.EPA method 3060A without the addition of Mg²⁺ and DPC analysis at pH 1.0 were applied. The latter procedure appears questionable since it leads to largely variable results which reflect the complex role played by humic matter in the determination of Cr(VI) and the instability of Cr(III) during the extraction.     

Hypochromic and hyperchromic effects on the vibronic structure of molecular crystal spectra. The dimer model

It is shown on model calculations that crystal-field mixing of Frenkel excition states in molecular crystals lead not only to a redistribution of their relative intensities but also to changes in the vibrational structure of weak exciton bands.     

Long-range flow-induced alignment of self-assembled rosette nanotubes on Si/SiOx and poly(methyl methacrylate)-coated Si/SiOx

Helical rosette nanotubes are obtained through the self-assembly of low molecular weight synthetic modules in water. Here we demonstrate that despite their dynamic nature, these materials respond very well to directional fluid flow and assume long-range order on flat substrates. Persistence length, order, and packing of the rosette nanotubes were found to depend dramatically on the surface properties of both the substrate and the nanotubes and vary from well-ordered long-range 2D films to bundled nanotubes or amorphous conglomerates. While flow-induced long-range alignment of dynamic nanostructures is unprecedented, the chemical tunability of the rosette nanotubes is anticipated to offer a versatile means for investigating the basis of interfacial forces in self-assembled organo-silicon devices and their effect on the stability and physical properties of organic nanostructures on electroactive surfaces.     

Separation of nickel from other elements by cation-exchange chromatography in dimethylglyoxime/hydrochloric acid/acetone media

Nickel can be separated from Zn, Co, Cu(II), Mn(II), Fe(III), U(VI) and other elements which readily form chloro complex ions, by eluting them with 0.5 M HCl/93% acetone from AG50W-X4 resin. Nickel is then eluted selectivity with 0.5 M HCl/95% acetone containing 0.1 M dimethylglyoxime, while the alkali and alkaline-earth elements, Al, Ti(IV), Sc, Y, La, lanthanides, Zr, Hf and Th are still retained. Separations are sharp and quantitative.     

NMR shielding constants for hydrogen guest molecules in structure II clathrates

Proton NMR shielding constants and chemical shifts for hydrogen guests in small and large cages of structure II clathrates are calculated using density-functional theory and the gauge-invariant atomic-orbital method. Shielding constants are calculated at the B3LYP level with the 6-311++G(d,p) basis set. The calculated chemical shifts are corrected with a linear regression to reproduce the experimental chemical shifts of a set of standard molecules. The calculated chemical shifts of single hydrogen molecules in the small and large structure II cages are 4.94 and 4.84 ppm, respectively, which show that within the error range of the method the H2 guest molecules in the small and large cages cannot be distinguished. Chemical shifts are also calculated for double occupancy of the hydrogen guests in small cages, and double, triple, and quadruple occupancy in large cages. Multiple occupancy changes the chemical shift of the hydrogen guests by approximately 0.2 ppm. The relative effects of other guest molecules and the cage on the chemical shift are studied for the cages with multiple occupancies.