Low‐Level Laser Therapy Restores the Oxidative Stress Balance in Acute Lung Injury Induced by Gut Ischemia and Reperfusion

It remains unknown if the oxidative stress can be regulated by low‐level laser therapy (LLLT) in lung inflammation induced by intestinal reperfusion (i‐I/R). A study was developed in which rats were irradiated (660 nm, 30 mW, 5.4 J) on the skin over the bronchus and euthanized 2 h after the initial of intestinal reperfusion. Lung edema and bronchoalveolar lavage fluid neutrophils were measured by the Evans blue extravasation and myeloperoxidase (MPO) activity respectively. Lung histology was used for analyzing the injury score. Reactive oxygen species (ROS) was measured by fluorescence. Both expression intercellular adhesion molecule 1 (ICAM‐1) and peroxisome proliferator‐activated receptor‐y (PPARy) were measured by RT‐PCR. The lung immunohistochemical localization of ICAM‐1 was visualized as a brown stain. Both lung HSP70 and glutathione protein were evaluated by ELISA. LLLT reduced neatly the edema, neutrophils influx, MPO activity and ICAM‐1 mRNA expression. LLLT also reduced the ROS formation and oppositely increased GSH concentration in lung from i‐I/R groups. Both HSP70 and PPARy expression also were elevated after laser irradiation. Results indicate that laser effect in attenuating the acute lung inflammation is driven to restore the balance between the pro‐ and antioxidants mediators rising of PPARy expression and consequently the HSP70 production.     

Effect of ethylene-co-vinyl acetate-glycidylmethacrylate and cellulose microfibers on the thermal,rheological and biodegradation properties of poly(lactic acid) based systems

The properties and biodegradation behavior of blends of poly(lactic acid) (PLA) and ethylene-vinyl acetate-glycidylmethacrylate copolymer (EVA-GMA), and their composites with cellulose microfibers (CF) were investigated. The blends and composites were obtained by melt mixing and the morphology, phase behavior, thermal and rheological properties of PLA/EVA-GMA blends and PLA/EVA-GMA/CF composite films were investigated as a function of the composition. The disintegrability in composting conditions was examined by means of morphological, thermal and chemical analyses to gain insights into the post-use degradation processes. The results indicated a good compatibility of the two polymers in the blends with copolymer content up to 30 wt.%, while at higher EVA-GMA content a phase separation was observed. In the composites, the presence of EVA-GMA contributes to improve the interfacial adhesion between cellulose fibers and PLA, due to interactions of the epoxy groups of GMA with hydroxyls of CF. The addition of cellulose microfibers in PLA/EVA-GMA system modifies the rheological behavior, since complex viscosity increased in presence of fibers and decreased with an increase in frequency. Disintegration tests showed that the addition of EVA-GMA influence the PLA disintegration process, and after 21 days in composting conditions, blends and composites showed faster degradation rate in comparison with neat PLA due to the different morphologies induced by the presence of EVA-GMA and CF phases able to allow a faster water diffusion and an efficient PLA degradation process.     

A fast parallel clustering algorithm for molecular simulation trajectories

We implemented a GPU‐powered parallel k‐centers algorithm to perform clustering on the conformations of molecular dynamics (MD) simulations. The algorithm is up to two orders of magnitude faster than the CPU implementation. We tested our algorithm on four protein MD simulation datasets ranging from the small Alanine Dipeptide to a 370‐residue Maltose Binding Protein (MBP). It is capable of grouping 250,000 conformations of the MBP into 4000 clusters within 40 seconds. To achieve this, we effectively parallelized the code on the GPU and utilize the triangle inequality of metric spaces. Furthermore, the algorithm's running time is linear with respect to the number of cluster centers. In addition, we found the triangle inequality to be less effective in higher dimensions and provide a mathematical rationale. Finally, using Alanine Dipeptide as an example, we show a strong correlation between cluster populations resulting from the k‐centers algorithm and the underlying density. © 2012 Wiley Periodicals, Inc.     

Thin-film polymerization and characterization of Sumitomo's Sumikasuper®-type liquid crystalline polymers

Using the thin film polymerization approach, we have studied the texture evolution when synthesizing a novel liquid crystalline polymer (LCP) system based on Sumikasuper^® LCPs. The main monomers used were p-acetoxybenzoic acid (ABA), 4,4′-biphenol (BP), isophthalic acid (IA), phthalic acid (PA) and terephthalic acid (TA). Polarizing optical microscopy (POM), FTIR, X-ray diffraction (XRD) and atomic force microscopy (AFM) were employed to study the thin film polymerization process and characterize the products. The generation and evolution of liquid crystal phases were monitored; the results revealed that there exists a composition range for the monomers to react and form liquid crystal materials. The critical temperature for LC formation in ABA/BP/IA system decreased with increasing ABA content. FTIR results confirmed the formation of polymers. AFM investigation suggested a similar process of morphological change to that observed using POM. An increasing surface roughness of the thin films with the progress of polymerization was also obtained from AFM analysis. A nematic LC texture of the polymer system was suggested by XRD examination. Results obtained by replacing BP with acetylated BP, and by conducting polymerization using two-monomer systems, suggest that BP units are included in polymers obtained by the thin film polymerization method.     

Wavelength dispersive X-ray fluorescence imaging using a high-sensitivity imaging sensor

A new wavelength-dispersive X-ray fluorescence (WD-XRF) imaging spectrometer equipped with a high-sensitivity imaging sensor was developed in our laboratory. In this instrument, a straight polycapillary optic was applied instead of a Soller slit as well as a 2D imaging X-ray detector instead of X-ray counters, which are used in conventional WD-XRF spectrometers. Therefore, images of elemental distribution were available after a short exposure time. Ni Kα images and Cu Kα images were clearly obtained at corresponding diffraction angles for a short exposure time of 10 s. By optimizing the spectrometer, the time required for imaging is reduced, leading to XRF image movies. It is difficult to distinguish two peaks (Ti Kα (4.508 keV) and Ba Lα (4.465 keV)) due to the poor energy resolution of EDXRS. However, Ti and Ba images could be successfully observed by the WD-XRF imaging spectrometer. The energy resolution of the developed spectrometer was 25 eV at the Ti Kα peak.     

Aryl‐Phosphonate Lanthanide Complexes and Their Fluorinated Derivatives: Investigation of Their Unusual Relaxometric Behavior and Potential Application as Dual Frequency 1H/19F MRI Probes

A series of low molecular weight lanthanide complexes were developed that have high ¹H longitudinal relaxivities (r₁) and the potential to be used as dual frequency ¹H and ¹⁹F MR probes. Their behavior was investigated in more detail through relaxometry, pH‐potentiometry, luminescence, and multinuclear NMR spectroscopy. Fitting of the ¹H NMRD and ¹⁷O NMR profiles demonstrated a very short water residence lifetime (<10 ns) and an appreciable second sphere effect. At lower field strengths (20 MHz), two of the complexes displayed a peak in r₁ (21.7 and 16.3 mM ^?1 s^?1) caused by an agglomeration, that can be disrupted through the addition of phosphate anions. NMR spectroscopy revealed that at least two species are present in solution interconverting through an intramolecular binding process. Two complexes provided a suitable signal in ¹⁹F NMR spectroscopy and through the selection of optimized imaging parameters, phantom images were obtained in a MRI scanner at concentrations as low as 1 mM . The developed probes could be visualized through both ¹H and ¹⁹F MRI, showing their capability to function as dual frequency MRI contrast agents.     

Design and Synthesis of Lipidic Organoalkoxysilanes for the Self‐Assembly of Liposomal Nanohybrid Cerasomes with Controlled Drug Release Properties

This paper reports the facile design and synthesis of a series of lipidic organoalkoxysilanes with different numbers of triethoxysilane headgroups and hydrophobic alkyl chains linked by glycerol and pentaerythritol for the construction of cerasomes with regulated surface siloxane density and controlled release behavior. It was found that the number of triethoxysilane headgroups affected the properties of the cerasomes for encapsulation efficiency, drug loading capacity, and release behavior. For both water‐soluble doxorubicin (DOX) and water‐insoluble paclitaxel (PTX), the release rate from the cerasomes decreased as the number of triethoxysilane headgroups increased. The slower release rate from the cerasomes was attributed to the higher density of the siloxane network on the surface of the cerasomes, which blocks the drug release channels. In contrast to the release results with DOX, the introduction of one more hydrophobic alkyl chain into the cerasome‐forming lipid resulted in a slower release rate of PTX from the cerasomes due to the formation of a more compact cerasome bilayer. An MTT viability assay showed that all of these drug‐loaded cerasomes inhibited proliferation of the HepG2 cancer cell line. The fine tuning of the chemical structure of the cerasome‐forming lipids would foster a new strategy to precisely regulate the release rate of drugs from cerasomes.     

Revisit of a series of ICT fluorophores: skeletal characterization,structural modification,and spectroscopic behavior

We have revisited the synthesis of a series of ICT fluorophores, which were reported to have a core structure of 8-oxo-8H-acenaphtho[1,2-b]pyrrol-9-carbonitrile. However, based on the 2D NMR and X-ray diffraction analysis, their core structure was corrected as 1-oxo-1H-phenalene-2,3-dicarbonitrile (1). Compound 1 shows a highly electron-deficient nature and can easily undergo oxidative S_NAr^H reaction on the naphthyl ring to produce a series of novel ICT fluorophores. The regioselectivity of this substitution reaction was studied by introduction of representative nucleophiles. Moreover, due to the strong rigidity and efficient ICT nature, the obtained fluorescent dyes display very good spectroscopic properties even in an aqueous environment.     

Optimised synthesis of diamino-triazinylmethyl benzoates as inhibitors of Rad6B ubiquitin conjugating enzyme

Recently, we have identified the first inhibitors of Rad6B, an E2 enzyme essential for post-replication DNA repair and a potential new drug target for the treatment of breast cancer. We report two newly optimised synthetic routes to our [4-amino-6-(phenylamino)-1,3,5-triazin-2-yl]methyl 4-nitrobenzoate target compounds TZ8 and TZ9 with general applicability for further structure–activity relationship studies around this pharmacophore. The key step involved the condensation/cyclisation between phenylbiguanide and either ethyl bromoacetate or dimethyloxalate in good yield.