Electrochemiluminescence Enhanced by the Synergetic Effect of Porphyrin and Multi-walled Carbon Nanotubes for Uric Acid Detection

The design and exploration of efficient, stable and environmentally compatible organic emitters for an electrochemiluminescence (ECL) sensor is a promising topic. Herein, a novel environmentally-friendly luminophore, ZnBCBTP@MWCNTs, were fabricated via self-assembly of porphyrin molecules (ZnBCBTP) onto multi-walled carbon nanotubes (MWCNTs). The resulting luminophore ZnBCBTP@MWCNTs displayed not only the highly ECL property and but also the good accelerated electron mobility. Then, a label-free ECL biosensor based ZnBCBTP@MWCNTs was constructed for the ultrasensitive detection of uric acid. Excitingly, this proposed ECL biosensor performed a good linear relationship in the range of 0–300 μM with a low detection limit of 1.4 μM, thus offering another reliable and feasible sensing platform for clinical bioanalysis with good selectivity, stability, and repeatability.     

LD Pump Single-Longitudinal-Mode Nd：GdVO4/RTP Solid-State Green Laser

The single-longitudinal-mode Nd：GdVO4/RTiOPO4 （RTP） solid-state Green laser operation of a laser-diode （LD） end-pumped laser is realized by multi-cavities and a Brewster plate. The LD-pumped single-frequency green laser has been demonstrated by optimizing several parameters and a cavity length, with precise temperature controlling of Nd：GdV04, RTP and laser diode. When the incident pump power is 2 W at 808.4 nm, a single-frequency cw green laser at 532nm with output 210 m W is obtained, the optical-to-optical conversion efficiency is up to 10.5%.     

Saddle point and generalized convex duality for multiobjective programming

In this paper we consider the dual problems for multiobjective programming with generalized convex functions. We obtain the weak duality and the strong duality. At last, we give an equivalent relationship between saddle point and efficient solution in multiobjective programming.     

Homoclinic and Periodic Orbits Arising Near the Heteroclinic Cycle Connecting Saddle-focus and Saddle Under Reversible Condition

In this paper, we study the dynamical behavior for a 4-dimensional reversible system near its heteroclinic loop connecting a saddle-focus and a saddle. The existence of infinitely many reversible 1-homoclinic orbits to the saddle and 2-homoclinic orbits to the saddle-focus is shown. And it is also proved that, corresponding to each 1-homoclinic （resp. 2-homoclinic） orbit F, there is a spiral segment such that the associated orbits starting from the segment are all reversible 1-periodic （resp. 2-periodic） and accumulate onto F. Moreover, each 2-homoclinic orbit may be also accumulated by a sequence of reversible 4-homoclinic orbits.     

牛顿环中心暗斑大小对测量结果影响的研究

本文分析了牛顿环中心暗斑大小对测量结果的影响,并给出了解决方法。     

Preparation and characterization of carbon xerogel (CX) and CX–SiO composite as anode material for lithium-ion battery

Carbon xerogel (CX), a kind of novel carbon material with low-density and continuous nano-porous structure that can be controlled and tailored on nanometer scale, has been prepared through the sol–gel polycondensation of resorcinol (R) with formaldehyde (F) followed by drying at ambient pressure and carbonization in inert atmosphere, and CX–SiO composite has been synthesized by high energy mechanical ball-milling of the obtained CX and commercial SiO at room temperature and atmosphere. The characteristics of CX and CX–SiO as anode material for lithium-ion battery have been systematically investigated on basis of field emission scanning electron microscope (FESEM), X-ray diffraction (XRD), electrochemical and charge–discharge tests. The results showed that, CX–SiO is composed of active carbon, graphite, SiO and dispersed Si crystal while CX consists of active carbon and graphite, CX–SiO has smaller and much more uniform particles than CX. SiO can greatly improve discharge capacity of CX with an acceptable sacrifice of cycling stability, and the charge–discharge capacity of CX–SiO comes mainly from lithium insertion–extraction in Si–SiO in the sample.     

A highly sensitive and rapid assay for protein determination in human urine and penicillin using a Rayleigh light-scattering technique with benzeneazo-8-acetylamino-1-naphthol-3,6-disulfonic acid sodium salt.

A simple and sensitive method was conducted for the determination of trace amounts of proteins with benzeneazo-8-acetylamino-1-naphthol-3,6-disulfonic acid sodium salt (azophloxine, AP) using a Rayleigh light-scattering (RLS) technique. At pH 2.60 and in the presence of an emulsifier OP microemulsion, the RLS of AP can be greatly enhanced by proteins, owing to the interaction between AP and protein. The enhanced intensity is proportional to the concentration of proteins. Four proteins, including bovine serum albumin (BSA), human serum albumin (HSA), lysozyme (Lys) and gamma globulin (gamma-G) have been tested. For example, the linear range of BSA was 0 - 0.06 microg mL(-1) with detection limits of 2.38 ng mL(-1). The method was applied to the analysis of protein in human urine and penicillin samples with satisfactory results. The relative standard deviation was in all instances less than 4.0%, and the recovery was in the range of 97.5 - 104%.     

Design and synthesis of new bidentate phosphoramidite ligands for enantioselective copper-catalyzed conjugate addition of diethylzinc to enones

Several thioaryl- and phosphino-phosphoramidite ligands have been synthesized from commercially available β-aminoalcohols. This new family of bidentate ligands are highly active in the enantioselective copper-catalyzed conjugate addition of diethylzinc to both cyclic and acyclic enones showing moderate to good enantiomeric excesses of up to 81%.     

Alloy composition effects on the gain and the differential gain for CdZnTe based II–VI semiconductor lasers

We study the variation of the gain and the differential gain for a quantum well laser based on the CdZnTe alloys. We calculate theoretically the optical gain of CdZnTe based quantum well laser, as function of the alloys composition for various values of carrier’s densities. Our study is based on the parabolic model with the intraband relaxation taken into account. Finally, we investigate how the composition alloys affects the differential gain of quantum well lasers.