微型柱在线分离-ICP-MS法测定高纯氧化铕中的14个稀土杂质

研究了微型柱在线分离-电感耦合等离子质谱法（ICP-MS）测定高纯Eu2O3中痕量Tm的方法，研制了Cyanex272负载树脂微型分离柱，优化了分离Eu2O3基体的实验条件，在线分离测定时间为25min。建立了在线柱分离测定Tm，内标补偿法直接测定其余稀土杂质的高纯Eu2O3中14个稀土杂质的ICP-MS分析方法。方法检出限为0.01μg/g-0.15μg/g，加标回收率为91.5%-110%,相对标准偏差为1.7%-4.9%。可满足快速测定99.999%Eu2O3中14个稀土杂质的要求。     

UV/Fe(Ⅲ)-富马酸盐体系降解对硝基苯酚

研究了在紫外光(UV)照射下,Fe(Ⅲ)-富马酸盐体系对p-硝基苯酚(PNP)的光降解反应,考察了溶液pH、Fe(Ⅲ)、富马酸盐和PNP的初始浓度对PNP降解率的影响。结果表明,UV/Fe(Ⅲ)-富马酸盐体系对PNP有光降解作用,相比于只含Fe(Ⅲ)或者富马酸盐体系,同时加入Fe(Ⅲ)与富马酸盐构成的体系在降解PNP方面有协同作用。在pH 3.0~6.0范围内,PNP的降解率随着pH和PNP初始浓度的增大而降低,而随着Fe(Ⅲ)和富马酸盐的初始浓度的增大而增大。氯仿猝灭法证实,该体系在降解PNP反应过程中产生了超氧负离子自由基;采用荧光法和异丙醇猝灭法证实了该体系在反应过程中产生了羟基自由基,同时证实了羟基自由基为PNP光降解反应的主要反应物质。     

40J激光装置研制

 报道了一台输出能量在40J量级的激光装置。该装置从星光Ⅱ激光装置分光作为光源,由放大器链、能源系统和支撑桁架等三大部分构成。对整个激光装置的模拟计算结果表明：装置的增益能力足够输出40J,B积分满足ΔB小于1.8的要求。研制了一种全腔水冷新型放大器,对其小信号增益系数和增益均匀性进行了测量,实验得出增益系数β为0.034cm ^-1,增益均匀性为91.84%。结果表明这种放大器完全能满足此激光装置的设计要求。     

聚酰亚胺模塑粉形态结构的 X射线分析

应用广角X射线衍射技术和小角X射线散射技术，对不同热处理温度下的聚酰亚胺模塑粉的形态结构进行了研究。结果表明：随着热处理温度的不同，模塑粉的结晶形态也相应发生变化。其中，热处理温度380℃与室温25℃相比较，模塑粉的相对结晶度增加近一倍；微观粒径尺寸也增加20％以上。     

Poly(methyl methacrylate)/silica nanocomposite fibers by electrospinning

Uniform poly(methyl methacrylate) (PMMA)/silica nanocomposite fibers containing up to 20 wt % silica were prepared by electrospinning. The electrospun solutions were prepared by mixing a solution of PMMA in dimethyl formamide (DMF) with colloidal silica in methyl ethyl ketone (MEK). The average fiber diameter decreases from 2.49 μm to 1.69 μm when 20 wt % silica is incorporated as a result of considerably increased solution conductivity, although the solution viscosity increases significantly, which should result in opposite effect. Thinner fibers (down to 350 nm) can be obtained by changing DMF/MEK proportion and by the addition of an ammonium salt. Nano‐sized silica particles (10–40 nm) distributes homogeneously in the fibers, as revealed by transmission electron microscopy. Furthermore, the incorporation of silica nanoparticles can change the thermal properties and surface wettability of the fiber mats. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1211–1218, 2009     

流量大小对混合流场特性等的影响

 在主、副气流各组份的流量比不变的情况下，改变输入氧碘化学激光器（COIL）光腔总气流流量，数值模拟给出了COIL拉伐尔喷管主、副气流混合状况和各物理量的分布等，通过对这些结果进行对比分析得出：输入COIL光腔总气流流量增加三倍，氧碘气流的混合状况稍稍变差，但Mach数和密度等的分布和变化规律基本不变。     

低能量离子束轰击对碳纳米管中杂质的去除

采用低能量离子束对碳纳米管进行轰击。 扫描电子显微镜测试表明,离子束轰击可以方便地去除碳纳米管中的杂质,拉曼光谱结果显示离子束轰击没有对碳纳米管造成明显损伤。 以尿素作为杂质添加到碳纳米管中,经离子束轰击后发现尿素消失,说明离子束对杂质的去除机制为其溅射效应。     

快前沿直线脉冲变压器单级模块开关触发时延分散性实验研究

针对12支路并联的快前沿直线脉冲变压器单级模块,给出了模块的电路结构和关键器件参数,实验获得了12只多间隙气体开关的自击穿特性和触发特性。同时,还给出了快前沿直线脉冲变压器模块输出电流的初步实验结果,工作电压150 kV时,次级短路放电电流幅值为235 kA,电流前沿88.2 ns（10%~90%）。次级带0.58 负载情况下,输出电流幅值114.5 kA,电流前沿88.9 ns（10%~90%）。利用微分环测量了12只开关的触发时延分散性,结果表明100次实验开关触发时延分散性近似符合正态分布,开关触发时延分散性对输出电流的影响不大,电流幅值和前沿的标准偏差分别小于2.0%,4.0%,电流波形的畸变主要以平顶为主。     

Nickel(II) complexes bearing pyrazolylimine ligand: synthesis,structure, and catalytic properties for vinyl‐type polymerization of norbornene

Two nickel(II) complexes of {2‐[C₃HN₂(R₁)₂‐3,5]}[C(R₂)?N(C₆H₃ⁱPr₂‐2,6)]NiBr₂ (complex 1 : R₁ = CH₃, R₂ = 2,4,6‐trimethylphenyl; complex 2 : R₁ = R₂ = Ph) were synthesized and characterized. The solid‐state structure of complex 1 has been confirmed by X‐ray single‐crystal analysis. Activated by methylaluminoxane (MAO), complexes 1 and 2 are capable of catalyzing the polymerization of norbornene with moderate activities [up to 10.56 × 10⁵ gPNBE (mol Ni h)^?1] with high molecular weights (M_w?13.56 × 10⁵ g mol^?1) and molecular weight distributions were around 2. The influences of polymerization parameters such as reaction temperature and Al–Ni molar ratio on catalytic activity and molecular weight of the polynorbornene were investigated in detail. The obtained polynorbornenes were characterized by means of ¹H‐NMR and FTIR techniques. The analytical results of polymer structures indicated that the norbornene polymerization is vinyl‐type polymerization rather than ROMP. Copyright © 2009 John Wiley & Sons, Ltd.