Influence of amphiphilic block copolymers on lyotropic liquid crystals in water-oil-surfactant systems

In ternary water-oil-nonionic alkyl polyglycol ether (C(i)E(j)) microemulsions, an increase in efficiency is always accompanied by the formation of a lamellar (L(alpha)) phase. The addition of an amphiphilic block copolymer to the ternary base system increases the efficiency of the microemulsion drastically while suppressing--at least partly--the formation of the L(alpha) phase. However, amphiphilic block copolymers can be used not only to suppress the formation of lyotropic liquid crystals but also for the opposite effect, namely, to induce their formation. To understand to what extent the increase in efficiency is accompanied by the formation of lyotropic liquid crystals, we studied phase diagrams of water-n-alkane-n-alkyl polyglycol ethers (C(i)E(j))-PEPX-PEOY at a constant volume fraction of oil in the water/oil mixture. Using polymers of the poly(ethylene propylene)-copoly(ethylene oxide) type, with M(PEP) = X kg mol(-1) and M(PEO) = Y kg mol(-1), we determined phase diagrams as a function of the polymer concentration, size, and symmetry. Moreover, the influence of a particular polymer mixture was studied, which turned out to be the best system if both a high efficiency and a low tendency to form an L(alpha) phase are needed.     

Simultaneous differential pulse-polarographic determination of CS2 and COS gases and its application in the analysis of dithiocarbamate fungicide residues in foods

The differential pulse-polarographic (DPP) determination of both CS₂ and COS gases, after their absorption in a methanolic piperidine reagent and the subsequent application of this technique to the residue analysis of dithiocarbamate fungicides is described. Rectilinear calibration curves for both CS₂ and COS in the respective regions of 1.5–9.2 and 2.1–12.6 μmol/l were obtained. The DPP method has been successfully applied to the determination of thiram residues on apples after a hot acid hydrolysis of the fruits.     

Molecular fractionation in isotactic polypropylene during isothermal crystallization

The nucleation frequency of isotactic polypropylene shows for certain molecular weight distributions during isothermal crystallization a “stepwise” development of the nuclei as a function of time. The resulting curve can be fitted by a superposition of exponential functions assuming a separate nucleation density for each nucleation step. The multimodal nucleation is discussed as a consequence of molecular fractionation effects during crystallization. Received: 23 October 1997 Accepted: 12 May 1998     

The modification of the triple helical structure of gelatin in aqueous solution I. The influence of anionic surfactants,pH-value,and temperature

The modification of the triple helical structure in aqueous gelatin solutions by changing pH and adding alkyl sulphates at 298 K and after rechilling the solution to 283 K was investigated by CD-measurement. At 298 K the triple helical content at the IEP of the gelatin has its maximum value. It is only weakly affected by adding sodium dodecyl sulphate (SDDS) at concentrations <10^–4 M/dm³. The unfolding of the triple helix affected by pH and SDDS is reversible by rechilling the solution. The triple helical content of gelatin solutions decreases at SDDS concentrations higher than 10^–4 M/dm³. In all cases the decrease of the amount of triple helical structure is connected with an increase of the cis-configuration in single chains and leads to chain reversals. At sufficiently high SDDS concentrations-sheets are formed. These changes are thermally irreversible. Sodium decyl sulphate (SDS) has a more minor influence than SDDS except in the range of the c.m.c. of SDS. At sufficiently high SDS concentrations,-turns appear.     

New liquid chromatographic-chemometric approach for the determination of sunset yellow and tartrazine in commercial preparation

A new liquid chromatographic (LC)-chemometric approach was developed for the determination of sunset yellow (SUN) and tartrazine (TAR) in commercial preparations. This approach uses LC and chemometric calibration methods, i.e., classical least-squares (CLS), principal component regression (PCR), and partial-least squares (PLS), simultaneously. The combined LC-chemometric approaches, denoted as LC-CLS, LC-PCR, and LC-PLS, are based on photodiode array (PDA) detection at multiple wavelengths. Optimum chromatographic separation of SUN and TAR with allura red as the internal standard (IS) was obtained by using a Waters Symmetry C18 column, 5 microm, 4.6 x 250 mm, and 0.2 M acetate buffer (pH 5)-acetonitrile-methano-bidistilled water (55 + 20 + 15 + 10, v/v) as the mobile phase at a flow rate of 1.9 mL/min. The LC data sets consisting of the ratios of analyte peak areas to the IS peak area were obtained by using PDA detection at 5 wavelengths (465, 470, 475, 480, and 485 nm). LC-chemometric calibrations for SUN and TAR were separately constructed by using the relationship between the peak-area ratio and the training sets for each colorant. LC-chemometric approaches were tested for different synthetic mixtures containing SUN and TAR in the presence of the IS. These LC-chemometric calibrations were applied to a commercial preparation of the 2 colorants. The experimental results of the LC-chemometric approaches were compared with those obtained by a developed classical LC method using single-wavelength detection.     

On the structural phase transition in rare earth elpasolites

The structural phase transition in two representatives of the rare earth elpasolite fluorides, Rb₂NaHoF₆ and Rb₂NaTmF₆, are studied in detail. The symmetry of the soft mode is determined from Raman spectra, X-ray and neutron powder diffraction data to be ₄ ⁺ . From the temperature dependence of the elastic constants of both compounds, estimates of various phase transition parameters are given, e.g. strain soft mode coupling constant and soft mode frequency. The softening of the elastic constants forT>T _c is explained by the strain coupling to the fluctuations of the soft mode coordinates. The energy of the soft phonon at the zone boundary is estimated from the data and compared with that of K₂ReCl₆. The phase transition mechanisms in rare earth elpasolites and hexahalometallates are discussed.     

Amorphous-amorphous transition in glassy polymers subjected to cold rolling studied by means of positron annihilation lifetime spectroscopy

In this study, polycarbonate (PC) and polystyrene (PS) are subjected to plastic deformation by means of cold rolling and the resulting variation of the free volume and its subsequent time evolution after rolling is investigated by means of positron annihilation lifetime spectroscopy (PALS). The value of the long lifetime component that is attributed to the decay of ortho-positronium (tau(o-Ps)) and its intensity (I(o-Ps)) are used to characterize, respectively, the size and the concentration of the free-volume holes. In addition to the PALS experiments, the effect of plastic deformation on the dynamic tensile modulus is investigated. The PALS results show that both for well-aged PC and PS an increase of tau(o-Ps) and a decrease of I(o-Ps) occur upon plastic deformation. During the subsequent aging, tau(o-Ps) tends to return to the value assumed before plastic deformation, while I(o-Ps) remains constant with time. These results corroborate the idea of an amorphous-amorphous transition, rather than that of a "mechanical rejuvenation" as proposed in the past to explain the ability of plastic deformation to reinitiate physical aging. Finally, a linear relation between the size of the free-volume holes and the dynamic tensile modulus is found, which suggests that the stiffness of amorphous glassy polymers is fully determined by their nanoscopic structure.     

InclusiveK *0(890) and\bar K*^0 (890) production on beryllium byK − and π− at 175 GeV

The reactions \(K^ - Be \to {}^(\bar K^) *^0 (890)X,\pi ^ - Be \to {}^(\bar K^) *^0 (890)X\) , have been studied in a 175 GeV unseparated hadron beam in the kinematic range 0<x _F <1.0 andp _T ² <5 GeV². Integrated cross-sections and the dependence of the cross-sections on the longitudinal and transverse momentum are presented, together with quark counting rules predictions. The nuclear dependence ofK ^? fragmentation intoK ^*0(890) with respect to Feynmanx is investigated from hydrogen to beryllium.     

Anisotropic muon Knight shift in the HCP single crystals of Cd,Zn and Be

In single crystal samples of Zn, Cd and Be (hcp structure) stroboscopicSR measurements successfully revealed anisotropies in the muon Knight shift (K). An anisotropic K can provide information on the amount of non s-electrons screening the charge of the muon implanted in these metals as a light hydrogen isotope. In Cd, the anisotropic part depends strongly on the temperature and shows a change in sign at roughly 110 K. In Zn, the anisotropic part below 10 K turns out to comprise 4th order contributions in the direction cosines of the external field. This can be understood on the basis of an anisotropicg-factor of the conduction electrons or spin-orbit coupling, respectively.     

Determination of the average lifetime of bottom hadrons

We have determined the average lifetime of hadrons containing b quarks produced in e⁺e^? annihilation to be

$\text{τ}\text{B}\text{=}\text{1.83}\text{+0.83}\text{+0.37}\text{?}\text{?0.34}\text{×10}{}^{\mathrm{?12}}\text{s}$

. Our method uses charged decay products from both non-leptonic and semileptonic decay modes.