Zweikernige silylenverbrückte Cyclopentadienylrhodiumbis(ethen)-Komplexe,photochemische Reaktion mit Benzolderivaten und selektiver Einschluß von Methylcyclopentan in das Kristallgitter von [Me2Si{3-But-C5H3Rh(C2H4)2}2]

Dinuclear Silylene Bridged Cyclopentadienylrhodiumbis(ethene) Complexes, Photochemical Reaction with Benzene Derivatives, and Selective Inclusion of Methylcyclopentane into the Crystal Lattice of [Me₂Si{3-Bu^t-C₅H₃Rh(C₂H₄)₂}₂] By reaction of [{(C₂H₄)₂RhCl}₂] with Na₂[Me₂Si(C₅H₄)₂] or with Li₂[Me₂Si(3-Bu^t-C₅H₃)₂] in THF the dinuclear silylene bridged complexes [Me₂Si{C₅H₄Rh(C₂H₄)₂}₂] 1 and [Me₂Si{3-Bu^t-C₅H₃Rh(C₂H₄)₂}₂] 2 , respectively, were synthesized. Due to the asymmetric substitution of the five-membered rings and their hindered rotation around the Si? C axes, 2 is formed as three isomers. The X-ray structure analysis of 2 obtained from hexane reveals the selective inclusion of methylcyclopentane, the content of which in the solvent is about 17%, into the crystal lattice. UV irradiation of 1 in hexane in the presence of benzene causes elimination of the ethene ligands yielding the μ-η³:η³ benzene complex [Me₂Si(C₅H₄Rh₂)₂C₆H₆] which cannot be separated from unreacted 1 . However, separation is possible in case of the hexamethylbenzene compound 4 analogous with 3 .     

Transient Spectroscopic Properties of [60] Fullerene—Containing Cyclic Sulphoxide

The properties of the triplet excited state of [60] fullerene-containing cyclic sulphoxide have been investigated by time-resolved absorption spectroscopy. Transient absorption bands of [60] fullerene-containing cyclic sulphoxide showed two decay-components, which wrer attributed to triplet excited states of different spin multiplicity. The properties of photoexcited states of [60] fullerene-containing cyclic sulphoxide are also reported.     

RE2CuO4的热力学稳定性（RE=La,Nd,Sm,Eu）

构筑了ＭｇＯ部分稳定的ＺｒＯ２基固体电解质电化学电池测量ＥＡＦ的实验装置，测定了Ｓｍ２ＣｕＯ４的标准Ｇｉｂｂｓ生成自由能。结果表明化合物ＲＥ２ＣｕＯ２３（ＲＥ＝Ｌａ，Ｎｄ，Ｓｍ，Ｅｕ）随着镧系元素离子半径减小，热力学稳定性下降，并用晶体场理论解释了这一规律。     

Two new compounds from Zingiber officinale

A new cyclic diarylheptanoid,1,5-epoxy-3-hydroxy-1-(3-methoxy-4,5-dihydroxyphenyl)-7-(4-hydroxyphenyl)-heptane (1),as well as a new monoterpene,10-O-β-D-glucopyranosyl-hydroxy cineole (2) were isolated from the rhizomes of Zingiber officinale. The structures of compounds 1 and 2 were established based on their spectral data.In addition,the antioxidant activities of these compounds were also measured.     

A self-assembly/disassembly two-photo ratiometric fluorogenic probe for bacteria imaging

A fluorogenic probe for bacteria imaging was reported. The binding with anionic bacterial surfaces disassembled the self-assembly probe to turn-on the fluorescence and shift pyrene monomer/excimer ratiometric signals.     

Selective binding of the cyano group in acrylonitrile adsorption on Si(100)-2 x 1

The covalent binding of acrylonitrile (CH(2)=CH-C triple bond N) and the formation of a C=C-C=N structure on Si(100) have been investigated using high-resolution electron energy loss spectroscopy (HREELS), X-ray photoelectron spectroscopy (XPS), ultraviolet photoelectron spectroscopy (UPS), and density functional theory (DFT) calculations. For chemisorbed acrylonitrile, the absence of nu(C triple bond N) at 2245 cm(-1) and the appearance of nu(C=N) at 1669 cm(-1) demonstrate that the cyano group directly participates in the interaction with Si(100), which is further supported by XPS and UPS observations. Our experimental results and DFT calculations unambiguously demonstrate a [2 + 2] cycloaddition mechanism for acrylonitrile chemisorption on Si(100) through the binding of C triple bond N to Si dimers. The resulting chemisorbed monolayer with a C=C-C=N skeleton can serve as a precursor for further chemical syntheses of multilayer organic thin films in a vacuum and surface functionalization for in situ device fabrication.     

Preparation of Mn3O4 nanocrystallites by low-temperature solvothermal treatment of γ-MnOOH nanowires

The preparation of trimanganese tetroxide (Mn₃O₄) nanocrystallites from γ-MnOOH nanowires under mild conditions has been achieved by two steps: first, γ-MnOOH nanowires with a mean diameter of about 12 nm and lengths of up to several micrometers were directly prepared via hydrothermal reaction between KMnO₄ and toluene in water at 180°C for 24 h; then, pure Mn₃O₄ nanocrystallites could be obtained by solvothermal treatment of the γ-MnOOH nanowires in ethylenediamine (EDA) and ethylene glycol (EG) at 150°C for 24 h. It was found that the Mn₃O₄ product obtained in EDA comprised well-defined nanocrystallites with the size in the range of 15-35 nm, while the one obtained in EG consisted of aggregated nanoparticles with the size of less than 18 nm.The possible formation mechanism of nanocrystalline Mn₃O₄ in EDA and EG and reasons for the different effects of various solvents on the products were also proposed.     

Mass transport in Triton X series nonionic surfactant solutions: a new approach to solute-solvent interactions

Densities, viscosities and tracer diffusion coefficients for solutions of the nonionic surfactants Triton X-45, X-114, X-100 and X-102 in water (except for Triton X-45) and methanol, and for Triton X-100 in three water-methanol mixtures have been measured at 298.15 K and 308.15 K. The activation energy for viscous flow and the contributions to it from solute and solvent have been calculated. Comparison of the Gibbs energies of these systems shows the roles of polyoxyethylene chains of Triton X molecules in the interactions between solute and solvent, and also the effects of solvents on the inter-actions for different solutes. The viscosityB coefficients are positive for all of the surfactant solutions, and the temperature coefficients ofB are negative. In the non-micellar solutions in methanol, values ofB are small and the temperature coefficient ofB is nearly zero. In water-methanol mixtures the critical micelle concentration becomes larger as the methanol content increases up to 40% w/w; micelles are not formed at higher methanol concentrations. TheB coefficient decreases with increasing proportion of methanol in the solvent, and the temperature coefficient ofB changes from a fairly large positive value at low methanol contents to a small negative value at 80% w/w methanol.     

5种生物胺的毛细管胶束电动色谱分离

在胶束电动色谱模式下考察了影响生物胺分离的几个因素(如缓冲溶液及SDS浓度、pH、表面活性剂、分离温度及外加电压等)并优化了分离条件,建立了一种简单快速的利用毛细管胶束电动色谱DAD检测器分离分析生物胺的新方法。当缓冲溶液为40mmol/L硼酸缓冲液(pH8.5)、68mmol/LSDS,分离电压为25kV、分离温度为25℃时,5种生物胺在7min内实现了令人满意的基线分离。在优化的条件下,对其线性范围、检出限和重现性进行了测定。结果表明,生物胺的迁移时间的重现性<0.8%,面积的重现性<4%。     

应变速率和电位对应力腐蚀裂纹扩展的影响

以滑移-溶解-再钝化模型为基础,推导出应力腐蚀裂纹扩展速率与裂尖应变速率和电位之间的理论公式.计算表明,在裂纹扩展速率与裂尖应变速率的关系曲线中有两个特征区域.裂纹扩展速率在区域I随裂尖应变速率增加而增大,而在区域II不随裂尖应变速率的改变而变化.用慢应变速率拉伸技术（SSRT）测量了304L不锈钢的裂纹增长速率.当电位控制在区域II的阳极区时,理论计算的裂纹扩展速率与实验得到的结果比较吻合.