Synthesis and applications of poly(acryl<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonamideamidine-<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonylamide) chelating fiber for pre-concentrating and separating trace Bi(III), Hg(III), Au(III) and Pd(IV) from solution samples

Poly(acrylp-aminobenzenesulfonamideamidine-p-aminobenzenesulfonylamide) chelating fiber containing "S", "N", and "O" elements was synthesized from polyacrylonitrile fiber and p-aminobenzene sulfonamide and used to enrich and separate trace Bi(III), Hg(III), Au(III), and Pd(IV) ions from wastewater and ore sample solution. The enrichment acidity, flow rate, elution conditions, reuse, interference ions, saturated adsorption capacity, constant of adsorption rate, analytical accuracy, and actual samples on chelating fiber were investigated by means of inductively coupled plasma optical emission spectrometry (ICP-OES) with satisfactory results. Solutions of 100 ng mL^–1 of Bi(III), Hg(III), Au(III), and Pd(IV) ions can be enriched quantitatively by this chelating fiber at a rate of 1.0 mL min^–1 at pH 4 and desorbed quantitatively with 20 mL of 0.25 M HCl and 2% CS(NH₂)₂ solution at 50 °C (with recovery 97%). When the chelating fiber was reused for 20 times, the recoveries of the analyzed ions enriched by the fiber were still over 95% (except for Hg(III)). One thousand-fold excesses of Mn²⁺, Ca²⁺, Zn²⁺, Mg²⁺, Fe³⁺, Cu²⁺, Ni²⁺, Al³⁺, and Ba²⁺ ions and thousands-fold excesses of Na⁺ and K⁺ cause little interference in the pre-concentration and determination of the analyzed ions. The saturated adsorption capacity of Bi(III), Hg(III), Au(III), and Pd(IV) was 4.850×10^–4, 3.235×10^–4, 2.807×10^–4, and 3.386×10^–4 mol g^–1, respectively. The constants of adsorption rate were 0.409 min^–1 for Bi, 0.122 min^–1 for Hg, 0.039 min^–1 for Au, and 0.080 min^–1 for Pd. The relative standard deviations (RSDs) for the enrichment and determination of 10 ng mL^–1 Bi(III), Hg(III), Au(III), and Pd(IV) were lower than 2.3%. The results obtained for these ions in actual samples by this method were basically in agreement with the given values with average errors of less than 1.0%. FT-IR spectra shows that the existence of –SO₂–Ar, –H₂N–Ar, O=C–NH–, HN=C–NH–, and –HN–SO₂ functional groups are verified in the chelating fiber. From the FT-IR spectroscopy, we can see that Hg(III), Au(III), and Pd(IV) are mainly combined with nitrogen and sulfur (or oxygen), and Bi(III) is mainly combined with nitrogen (or oxygen) of the groups to form a chelating complex.     

Catalytic asymmetric cyanosilylation of ketones with chiral Lewis base

The development of broadly applicable and practical catalytic approaches for the enantioselective creation of quaternary stereocenters remains a highly desirable yet challenging goal. In this Communication, we describe a highly enantioselective cyanosilylation of acetal ketones (alpha,alpha-dialkoxy ketones) catalyzed by modified cinchona alkaloids. This reaction is the first highly enantioselective cyanosilylation of ketones catalyzed by an organic chiral Lewis base and is found to be highly efficient with acetal ketones bearing a broad range of alkyl, aryl, alkenyl, and alkynyl substituents. This new catalytic asymmetric reaction, coupled with the versatility of the acetal functionality, provides a broadly useful synthetic method for chiral building blocks bearing quaternary stereocenters. Acetal ketones, readily accessible but previously unexplored in asymmetric synthesis, demonstrate unusual reactivity and selectivity toward the nucleophilic cyanosilylation, thereby suggesting that they may be interesting substrates for other catalytic enantioselective reactions.     

Quantum chemical study on the abstraction reaction of alkylidenegermylene with oxirane and thiirane

The mechanisms of theion reaction of alkylidenegermylene with oxirane and thiirane have been characterized detail in using density functional theory, as well as ab initio method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. Energies were calculated by CCSD(T)/6-311G(d)//B3LYP/6-311G(d,p) method for the involved conformations. The results show that the reaction pathways for both reactions consist of two ways: (1) the reactants can yield bent products (P1; P4) by syn-isomers; (2) the reactants can also yield three-membered products (P2; P5) by anti-isomers, which then further react with oxirane and thiirane to form the ultimate products (P3-1, P3-2; P6). Furthermore, a comparison with alkylidenecarbene, oxirane, and thiirane was done.     

Preparation, phase transformation and photocatalytic activities of cerium-doped mesoporous titania nanoparticles

Cerium-doped mesoporous TiO₂ nanoparticles with high surface area and thermal stable anatase wall were synthesized via hydrothermal process in a cetyltrimethylammonium bromide (CTAB)/Ti(SO₄)₂/Ce(NO₃)₄/H₂O system. The obtained materials were characterized by XRD, FESEM, HRTEM, FTIR spectroscopy, nitrogen adsorption and DRS spectra. Experimental results indicated that the doping of cerium not only increased the surface area of mesoporous TiO₂ nanoparticles, but also inhibited the mesopores collapse and the anatase-to-rutile phase transformation. Moreover, the undoped, doped anatase mesoporous nanoparticles exhibit higher photocatalytic activity than commercial photocatalyst (Degussa, P25), but the maximum photodegradation rate corresponds to the undoped mesoporous TiO₂ nanoparticles. The lower photocatalytic activities of cerium-doped samples compared with undoped one may be ascribed to that the doped cerium partially blocks titania's surface sites available for the photodegradation and absorption of Rhodamine B (RB).     

Analysis of polynuclear aromatic hydrocarbons by glass capillary gas chromatography using simultaneous flame ionization and electron capture detection

The possibility of simultaneous application of an electron capture (ECD) and a flame ionization detector (FID) connected to a glass capillary column for analyzing polynuclear aromatic hydrocarbons (PNA) has been investigated. The ECD/FID ratio is determined for 46 PNA compounds. The ratios vary from 0.02 to 117 with relative standard deviations better than 20 percent determined from 10 replicate analyses. The results suggest that the method may be used for obtaining additional evidence in identifying PNA in environmental samples. Impurities and transformation products in the standard were identified by computerized glass capillary gas chromatography/mass spectrometry. Quinones and diones are responsible for the high EC-response determined in some trace components in the standard. An application of the method is shown for PNA from particulates in urban atmospheres.     

钐(II)类卡宾CH3SmCH2I与乙烯环丙烷化反应及溶剂化效应的理论研究

用密度泛函B3LYP方法研究了过渡金属钐类卡宾与乙烯的环丙烷化反应的机理. 对钐类卡宾试剂CH₃SmCH₂I和CH₂CH₂反应的反应物、中间体、过渡态和产物构型的全部结构几何参数进行了优化, 并计算了THF溶液的溶剂化效应, 用内禀反应坐标(IRC)计算和频率分析方法, 对过渡态进行了验证. 结果表明: CH₃SmCH₂I与CH₂CH₂环丙烷化反应按亚甲基转移机理(通道A)和卡宾金属化机理(通道B)都可以进行, 与锂类卡宾的反应机理相同, 通道A比通道B反应的势垒降低了14.65 kJ/mol. 溶剂化效应使通道B比通道A的反应势垒大幅度提高, 更有利于反应沿通道A进行, 而不利于通道B.     

Dynamics of superionic Rb3H(SeO4)2 single crystals studied by H and Rb spin-lattice relaxation

The ¹H and ⁸⁷Rb spin-lattice relaxation and spin-spin relaxation times in superionic Rb₃H(SeO₄)₂ single crystals grown by the slow evaporation method were measured over the temperature range 160-450 K. The temperature dependencies of the ¹H T₁, T_1ρ, and T₂ are measured. In the ferroelastic phase, T₁ differs from T_1ρ, which is in turn different from T₂, although these three relaxation times converge to similar values near 410 K. This transition seems to occur at temperature which is about 40 K lower than the superionic transition temperature. The observation of liquid-like values of the ¹H T₁, T_1ρ, and T₂ in the high temperature is compatible with the phase being superionic, indicating that the destruction and reconstruction of hydrogen bonds does indeed occur at high temperature. In addition, the ⁸⁷Rb T₁ and T₂ values at high temperature were similar (on the order of milliseconds), a trend that was also observed for ¹H T₁ and T₂. This behavior is expected for most hopping-type ionic conductors, and could be attributed to interactions between the mobile ions and the neighboring group ions within the crystal. The motion giving rise to this liquid-like behavior is related to the superionic motion.     

Recent progress and challenges in carboxylation with CO2

1. Download : Download high-res image (140KB)
2. Download : Download full-size image

     

树脂填充EVAL纤维吸附剂的制备及其吸附性能表征

采用具有亲水性的乙烯-乙烯醇共聚物(EVAL)作为纤维吸附剂基质材料,粉末型Lewatit阳离子交换树脂CNP80ws为功能材料,采用可控相分离方法,制备了不同表面形态结构的树脂填充EVAL吸附剂.当使用外部液体调控相分离过程时,在纤维的表面形成了粗糙的开孔结构,并且随树脂的填充量提高纤维表面的粗糙度与开孔度有所提高.研究结果表明:树脂填充EVAL纤维吸附剂具有较大的吸附容量与较高的脱附率,其吸附容量不低于53.9mg BSA/g吸附剂(树脂填充量50%).     

Experimental and density functional studies on two structurally similar antipyrine derivatives: 4-(2-hydroxy-5-nitrobenzylidene-amino)-1,2-dihydro-1,5-dimethyl-2-phenylpyrazol-3-one and 4-(3-bromo-5-chloro-2-hydroxybenzylideneamino)-1,2-dihydro-1,5-dimethyl-2-phenylpyrazol-3-one

The Schiff base compounds, 4-(2-hydroxy-5-nitr- obenzylideneamino)-1,2-dihydro-1,5-dimethyl-2-phenylpy- razol-3-one and 4-(3-bromo-5-chloro-2-hydroxybenz- ylideneamino)-1,2-dihydro-1,5-dimethyl-2-phenylpyrazol-3-one, have been synthesized and characterized by elemental analysis, IR, and X-ray single crystal determination. Density functional calculations of the structures, natural bond orbitals, and frontier molecular orbitals and Mülliken charge analysis on the compounds were performed at B3LYP/6-31+G(d) level of theory. Vibrational frequencies were also predicted, assigned, and compared with the experimental values, which supported each other.