Studies on the Distribution of Phenoxyacetic Acid in Two-Phase Systems: <Emphasis Type="Italic">n</Emphasis>-Aliphatic Hydrocarbon – Water

Summary. Phenoxyacetic acid distribution in two-phase systems n-aliphatic hydrocarbon (C₅–C₈) – water and its dimerization in organic phase were investigated. The values of distribution coefficient (D _HR), distribution constant (K _D), and dimerization constant (K _dim) of acid were obtained. The empirical correlations of these quantities with Hildebrand solubility parameter of organic solvents were established. The influence of pH of the aqueous phase as well as the polarity of the applied organic solvents on phenoxyacetic acid physical chemistry in the two-phase systems was described.     

Synthesis of non-agglomerated Ba<Subscript>0.77</Subscript>Ca<Subscript>0.23</Subscript>TiO<Subscript>3</Subscript> nanopowders by a modified polymeric precursor method

In this work, we have studied the influence of the pH on the synthesis and structural properties of the Ba_0.77Ca_0.23TiO₃ nanopowders synthesized by a modified polymeric precursor method, in order to achieve non-agglomerated powders. Synthesis, morphology, thermal reactions, crystallite and average particle size of the synthesized powders were investigated through thermal analysis (DTA/TG), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and Infrared spectroscopy. In summary, Ba_0.77Ca_0.23TiO₃ nanopowders were synthesized for the first time at a relative low temperature (500 °C). It was also found that the alkalinity and acidity of the solution presented a great influence on the powder properties. The best results were obtained from solutions with pH = 8.5 and 11 whose nanopowders presented weakly agglomerate, with homogeneous particle size and a narrow size distribution (30–40 nm). This behavior could be explained based on the FT-IR results in which it was possible to see the increased of the chelation in higher pHs.     

Synthesis and characterization of hybrid borosiloxane gels as precursors for Si–B–O–C fibers

The sol–gel method has been used for the synthesis of borosilicate gels from mixtures of methyltriethoxysilane (MTES) and dimethyldiethoxysilane (DMDES) and boric acid. The use of boric acid, B(OH)₃ allows the hydrolysis and condensation of hybrid silicon alkoxides without further addition of water or catalyst. The use of difunctional silicon units, –(CH₃)₂SiO– promote the formation, during the sol–gel process, of linear oligomers which facilitate fiber drawing before gelation. Gel characterization performed by FT-IR, XRD, TG-DTA and DCS analysis indicates the formation of a mixed network with incorporation of the boron units via =B-O-Si≡ bridges. The formation of borosiloxane bonds seems favored by the presence of DMDES. SiBOC glasses were obtained after pyrolysis of the borosilicate gels in argon atmosphere at 1000 °C. TG-DTA study indicates that the ceramic yield decreases by increasing the amount of DMDES. Gel fibers were successfully prepared from convenient partially-aged solutions by hand drawing. Pyrolysis of the obtained gel fibers under argon atmosphere at 1000 °C open the possibility to produce SiBOC homogeneous glass fibers with diameter as low as 10 μm.     

Pectin in controlled drug delivery – a review

Controlled drug delivery remains a research focus for public health to enhance patient compliance, drug efficiency and reduce the side effects of drugs. Pectin, an edible plant polysaccharide, has been shown to be useful for the construction of drug delivery systems for specific drug delivery. Several pectin derived formulations have been developed in our laboratory and tested in vitro, ex vivo, and in vivo for the ability to deliver bioactive substances for therapeutic purposes in the context of interactions with living tissues. Pectin derivatives carrying primary amine groups were more mucoadhesive and have shown potential in nasal drug delivery and other mucosal drug delivery. Pectin derivatives with highly esterified galacturonic acid residues are more hydrophobic and able to sustain the release of incorporated fragrances for a prolonged duration. Less esterified pectin derivatives are able to penetrate deeper into the skin and may be useful in aromatherapy formulations. Pectin, in combination with zein, a corn protein, forms hydrogel beads. The bound zein restricts bead swelling and retains the porosity of the beads; the pectin networks shield the zein from protease attack. The complex beads are ideal vehicles for colon-specific drug delivery. Studies presented in this paper indicate the flexibility and possibility to tailor pectin macromolecules into a variety of drug delivery systems to meet different clinical requirements. Mention of trade names or commercial products in this article is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the US Department of Agriculture.     

Mapping of possible prion protein self-interaction domains using peptide arrays

Background  

The common event in transmissible spongiform encephalopathies (TSEs) or prion diseases is the conversion of host-encoded protease sensitive cellular prion protein (PrP^C) into strain dependent isoforms of scrapie associated protease resistant isoform (PrP^Sc) of prion protein (PrP). These processes are determined by similarities as well as strain dependent variations in the PrP structure. Selective self-interaction between PrP molecules is the most probable basis for initiation of these processes, potentially influenced by chaperone molecules, however the mechanisms behind these processes are far from understood. We previously determined that polymorphisms do not affect initial PrP^C to PrP^Sc binding but rather modulate a subsequent step in the conversion process. Determining possible sites of self-interaction could elucidate which amino acid(s) or amino acid sequences contribute to binding and further conversion into other isoforms. To this end, ovine – and bovine PrP peptide-arrays consisting of 15-mer overlapping peptides were probed with recombinant sheep PrP^C fused to maltose binding protein (MBP-PrP).     

Amperometric Glucose Biosensor Based on Platinum Nanoparticles Combined Aligned Carbon Nanotubes Electrode

A sensitive amperometric glucose biosensor based on platinum nanoparticles (PtNPs) combined aligned carbon nanotubes (ACNTs) electrode was investigated. PtNPs which can enhance the electrocatalytic activity of the electrode for electrooxidating hydrogen peroxide by enzymatic reaction were electrocrystallized on 4‐aminobenzene monolayer‐grafted ACNTs electrode by potential‐step method. These PtNPs combined ACNTs' (PtNPs/ACNTs) surfaces were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The highly dispersed PtNPs on ACNTs can be obtained. The enzyme electrode exhibits excellent response performance to glucose with linear range from 1×10^?5–7×10^?3 mol L^?1 and fast response time within 5 s. Furthermore, this glucose biosensor also has good reproducibility. It is demonstrated that the PtNPs/ACNTs electrode with high electrocatalytic activity is a suitable basic electrode for preparing enzyme electrodes.     

Synthesis and characterization of Mn-, La-Mn- and La-Ca-Mn-citrates as precursors for LaMnO<Subscript>3</Subscript> and La<Subscript>1−x</Subscript>Ca<Subscript>x</Subscript>MnO<Subscript>3</Subscript>

Mn-, LaMn- and LaCaMn-citrates were synthesized at 60–120°C in ethylene glycol medium using chlorides or nitrates as metal sources. Their composition, IR spectra and thermal decomposition were studied. Equimolar La/Mn ratio has been established in the complex, prepared from chloride solution with the same initial composition of the metals. In the isolated three-metallic complex the molar ratio of the metals deviates from the composition in the initial solution. The final products of the heating of Mn- and mixed-metal LaMn-citrates at 1000°C are phase-homogeneous Mn₃O₄ (hausmannite) and LaMnO₃ respectively. Parasitic phase(s) are observed in La_xCa_1−xMn_yO₃, produced from LaCaMn-citrate.     

A new dimension in thermal analysis

Summary An enormous development has taken place within the last five years in synchronous teaching over the Internet, i.e. both the teacher and the students are simultaneously in direct communication with each other as in a normal class-room or auditorium. With this concept it is possible to communicate orally, to exchange Power Point Presentations, documents, programmes and live web-camera pictures. It is even possible to use an electronic black board on which both the teacher and the students can work simultaneously. The great advantage with this type of teaching is that it is not restricted to a single class-room/auditorium with limited access, but in a virtual room accessible to everybody in principle all over the world, and which certainly open up new possibilities in teaching. The purpose of this paper is to present and to discuss the concept of virtual class-room teaching, how the system operates in practice, its advantages and, finally, how its inherent limitations can be overcome.     

Cyanide attack at low-spin iron(II)–diimine complexes: the structure of a cyanide-containing derivative of a leaving ligand

The isolation and structural characterisation of the product of addition of HCN to the Schiff base derived from phenyl 2-pyridyl ketone and 3,4-dimethylaniline (Me2bsb) provides evidence in favour of a mechanism involving nucleophilic attack at the coordinated ligand for reaction of the complex [Fe(Me₂bsb)₃]²⁺ with cyanide.     

Selective oxidation of octadecan-1-ol to octadecanoic acid over Co3O4/SiO2 catalysts

Factors (reaction temperature, reaction time, flow rate of oxygen, amount of catalyst, etc.) influencing the catalytic properties of Co₃O₄/SiO₂catalyst in the oxidation octadecan-1-ol to octadecanoic acid were investigated. The catalysts were characterized by means of XRD, FT-IR and N₂-adsorption. The experimental results indicate that under the optimal condition the selectivity to octadecanoic acid reached 97.5 % over 5 % Co₃O₄/SiO₂ catalyst.This revised version was published online in December 2005 with corrections to the Cover Date.