A Liouville type theorem for polyharmonic elliptic systems

In this paper, we consider the polyharmonic system m(−Δ)U=Vq,m(−Δ)V=Up in RN, for m>1, N>2m, with p?1, q?1, but not both equal to 1, where m(−Δ) is the polyharmonic operator. Set α=2m(q+1)/(pq−1), β=2m(p+1)/(pq−1), for α,β∈[(N−2)/2,N−2m), we prove the nonexistence of positive solutions.     

First-principle studies on the electronic structure of Fe3O4(110) surface

The first-principle was employed to study the six possible models for the Fe₃O₄(110) surface, namely the AB-terminated surface (AB model), the AB-terminated with Fe_A vacancy (AB-Fe_A vac model), the AB-terminated with Fe_B vacancy (AB-Fe_B vac model), the B-terminated surface (B model), the B-terminated surface with Fe_B vacancy (B-Fe_B vac model) and the B-terminated surface with O vacancy (B-O vac model). The stability, the electronic structure and the magnetic properties of the six surface models were also calculated. The results predict that the B-O vac model is more stable than other types of surface models. The half-metallic property remain in the AB and B models, while the other four surface models exhibit metallic properties. At the same time, the AB, AB-Fe_A vac, AB-Fe_B vac, B and the B-Fe_B vac models have ferrimagnetic properties, while the B-O vac model has antiferromagnetic property.      

Fabrication of bamboo-shaped GaN nanorods

Bamboo-shaped GaN nanorods were formed through a simple sublimation method. They were characterized by means of X-ray powder diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and selected-area electron diffraction (SAED). The TEM image showed that the nanorods were bamboo-like. XRD, HRTEM and SAED patterns indicated that the nanorods were single-crystal wurtzite GaN. Received: 8 January 2001 / Accepted: 28 April 2001 / Published online: 20 December 2001     

Optimizing the optical field distribution of solid immersion lens system by a continuous phase filter

In solid immersion lens (SIL) microscopy systems with high numerical aperture (NA), there always exists the aberration produced by Fresnel effects at the interface between SIL and the sample. This aberration may cause the degradation of the image of sample. We design a continuous phase filter and optimize the optical field distribution of SIL system. The numerical results show that when the continuous phase filter is used, the field distribution of SIL system can be optimized, and the focal depth and intensity of transmitted light can be increased. At the same time, the intensity of side-lobe and the resolution are kept almost unchanged.     

Photoacoustic spectroscopy for fast and sensitive ammonia detection

A photoacoustic (PA) spectrometer with H-type first longitudinal resonant cells for ammonia detection is developed. A new PA cell structure is designed to accelerate the drift velocity of the sample gas near the cell surface, so that the short response time at the flow rate of 100 sccm (standard cubic centimeter per minute) is achieved. The response time of 5 min and detection limit of 0.86 ppbv is reached for ammonia concentration measurement with a Teflon polytetrafluoroethylene (PTFE) cell. Further improvement could be expected when using a brass cell with a high quality Teflon fluorinated ethylene propylene (FEP) coating.     

应用参数假设检验分析特异功能是否存在

本文应用参数假设检验知识分析“特异功能”者是否有特异功能。     

吸附溶出伏安法测定毗喳酮的研究

本文报道了用吸附溶出伏安法测定毗喳酮.以悬汞电极为工作电极，在Na}B,O,-NaOH介质(pH=10)中，毗喳酮产生一尖锐的吸附还原峰,E，二一1. 29V (vs. SCE )，峰电流与毗喳酮浓度在2. 0 X 10-'-8. 0 X 10-smol " L-’范围内呈良好的线性关系.检测限为2. 0 X 10-0mol " L-'(富集90s).本文对毗喳酮在悬汞电极上的电化学行为进行了探讨，对测定毗喳酮的最佳条件进行了详细的选择，利用本法测定了片剂中毗喳酮含量，结果满意.     

A high-speed high-sensitivity acoustic cell for in-line continuous monitoring of MOCVD precursor gases

We describe a continuous wave resonant acoustic sensor that has been optimized as a very sensitive in-line monitor for measuring the composition of precursor gases used in MOCVD processes. The precursor/carrier gas mixtures flow through a compact stainless steel acoustic chamber that is isolated from the acoustic transducers by a set of metallic diaphragms. The sensor has been successfully operated at supply line pressures from atmosphere down to 50 Torr with gas flow rates of up to 1600 sccm. The accuracy of the speed of sound measurement for hydrogen gas is better than 0.005%, even in a high noise and low pressure environment. Hydrogen, as well as nitrogen or argon carrier gases, are accommodated within the instrument's 1–5 kHz working frequency range. The instrument's sensitivity and stability are demonstrated with the laboratory data. Measurements of the dynamic response characteristics of the metalorganic bubbler lines at low pressure are also be presented. Application of the cell is general, encompassing any of the metalorganic and hydride materials typically used in MOCVD processes.