The Monitoring System Using FOBG Sensor for The Health of the Rocket

A novel heath monitoring system of the rocket based on fiber optic Bragg gratings is brought forward, its component units and working principle are also described.     

Efficient Synthesis of the Oxadiazole Biphenyl Tetrazoles

Since the discovery of losartan[1](DUP 753), the leading non-peptide AT1 antagonist, several highly potent AT1 selective antagonists bearing heterocycles have been reported. [2] The tetrazole group is a common acidic functionpresent in many these antagonists.     

Geometrical study of paraxial light beam transmission in free space

By introducing an imaginary space transform curvature ρ_s, a complex space called Riemannian space is constructed, in which the light propagating in free space has the trajectory of straight line while propagating. Moreover, this curvature couples with that of the wave front of the paraxial beam ρ_w, and therefore a complex curvature ρ_c is constructed, which can be employed to investigate the behavior of the light transmission and to generalize the ABCD law. Project supported by the National Hi-Tech Inertial Confinement Fusion Committee, the Guangdong Natural Science Foundation the Postdoctoral Foundation of Guangdong and National Postdoctoral Foundation of China.     

单件小批生产系统下模糊优化的动态随机投入产出模型

本文针对单件小批量生产系统 ,建立了模糊优化的动态随机投入产出模型 ,同时给出了该模型的递推解法 ,并用此模型对某单件小批企业在生产计划期的商品量进行了规划     

聚醚醚酮链结构与反应的模型化合物的量子化学研究

利用ＡＭ１方法对聚醚醚酮模型化合物全优化，结果为：芳环平均相互扭转角为３３．０度，桥键角１１７．０－１１８．０度，其分子结构拓扑图形表明：所有苯环（核）为平面构型，但其内角扭曲；其氢原子对苯环构型无实质性贡献，在更长链的计算中，冻结苯核与氢原子也得出满意结果，根据Ｍｕｌｌｉｋｅｎ键序与电荷讨论了醚交换与磺化反应。     

Ga1-xInxAs/InAsyP1-y/InP异质结的MOCVD生长及表征

Ga1-xInxAs(x>0.53)材料是未来长距离低损耗光纤通信的理想光源材料和探测器材料之一.我们采用水平常压MOCVD系统,在InP衬底上成功地生长了Ga1-xInxAs(x>0.53)/InAsyP1-y/Inp异质结材料.其中InAs1-yPy为组份阶梯变化的多层结构.由样品的(400)面X光衍射结果测定了各层组份.由二次离子质谱(SIMS)得到了样品剖面组份变化结果,证明InAs1-yPy层组份为阶梯状变化的.通过对光致发光结果和X光衍射结果比较,可以看到,InAsyP1-y层通过位错和弹性畸变二种方式来释放或积累Ga1-xInxAs与InP间的失配应力,从而减少了Ga1-xInxAs中的失配位错.有效地改善了Ga1-xInxAs的质量.已获得了x高达0.94表面光亮的Ga1-xInxAs/InAs1-yPy/InP异质结材料.     

颗粒增强复合材料热应力分析的双层嵌套模型

建立了一个把增强颗粒球和基体空心球嵌入等效复合介质空腔中的“双层嵌套模型”,研究了颗粒增强材料自高温冷却下来时,不同相中热应力的分布特点。推出了热应力在弹性和弹塑性状态的各种表达式。研究表明,随着温度降低,增强体受到压应力,基体材料中存在的静水应力为拉应力。温度继续下降,将出现自增强颗粒与基体界面向外扩展的屈服区。随增强相体积分数增大,增强颗粒受到的压应力和基体中的静水拉应力减小,增强颗粒与基体界面屈服的起始温差增大,而基体材料全面屈服的温差却减小。     

Independent cycles with limited size in a graph

Letk and s be two positive integers with s≥3. LetG be a graph of ordern ≥sk. Writen =qk + r, 0 ≤r ≤k - 1. Suppose thatG has minimum degree at least (s - l)k. Then G containsk independent cyclesC ₁,C ₂,...,C _k such thats ≤l(C _i ) ≤q for 1 ≤i ≤r arnds ≤l(C _i ) ≤q + 1 fork -r <i ≤k, where l(C_i) denotes the length ofC _i .     

In situ observation of NaBi(WO4)2 dendrite growth and the study on microstructure of solidification

The dendrite growth process of transparent NaBi(WO₄)₂ with small prandtl and high melting point was studied by using the in-situ observation system. According to the dynamic images and detailed information, there are two kinds of restriction effect on the dendrite growth, the competition between arms and branches and the convection in the melt. The dendrite growth rate was time dependent, and the rate of arm growth reached the maximum 5.8 mm/s in the diffusive-advective region and rapidly decreased in the diffusive-convective region. The growth rate of branch had the same change trends as the arm’s. Based on the EPMA-EDS data of solidification structure of quenched NaBi(WO₄)₂ melt, it was found that there were component differences from stoichiometric concentration in the melt near the interface during the growth process. Supported by the National Natural Science Foundation of China (Grant No. 50331040) and the Innovation Funds from Shanghai Institute of Ceramics, Chinese Academy of Sciences (Grant No. SCX0623)     

CCD光谱谱线标定方法研究

CCD作为光谱分析和测色仪器的光谱接收器件 ,光谱谱线定位受单色仪狭缝和CCD光敏元尺寸影响。提出采用最小二乘法做曲线拟合和质心法来确定光谱线在CCD上的精确定位 ,使光谱谱线的定位精度得到提高 ,并且不受CCD光敏元尺寸限制。实验结果表明 ,两种方法对光谱线的定位 ,具有重复性高 ,稳定性好等特点。在定位精度上 ,两者具有一致性。