Single-emissive-layer all-perovskite white light-emitting diodes employing segregated mixed halide perovskite crystals

Metal halide perovskites have demonstrated impressive properties for achieving efficient monochromatic light-emitting diodes. However, the development of white perovskite light-emitting diodes (PeLEDs) remains a big challenge. Here, we demonstrate a single-emissive-layer all-perovskite white PeLED using a mixed halide perovskite film as the emissive layer. The perovskite film consists of separated mixed halide perovskite phases with blue and red emissions, which are beneficial for suppressing halide anion exchange and preventing charge transfer. As a result, the white PeLED shows balanced white light emission with Commission Internationale de L''Eclairage coordinates of (0.33, 0.33). In addition, we find that the achievement of white light emission from mixed halide perovskites strongly depends on effective modulation of the halide salt precursors, especially lead bromide and benzamidine hydrochloride in our case. Our work provides very useful guidelines for realizing single-emissive-layer all-perovskite white PeLEDs based on mixed halide perovskites, which will spur the development of high-performance white PeLEDs.

We demonstrated a single-emissive-layer all-perovskite white light-emitting diode based on a mixed halide perovskite film.     

Complex Study of the Spearhead Superficial Crust from Burial Mound no. 1 near Novosvobodnaya Village

A complex study of a spearhead dated back to IV mill. BC from burial mound no. 1 near Novosvobodnaya village (collection of the State Historical Museum) and, in particular, the material of spearhead superficial crust has been performed. The elemental and phase composition of the metal of spearhead and the superficial crust on its surface have been determined by scanning electron microscopy, jointly with energydispersive X-ray microanalysis and X-ray phase analysis. A comparative analysis of the results of studying the spearhead superficial crust and similar crusts on other artifacts from the mounds near Novosvobodnaya village suggest natural origin of the crust on copper?arsenic artifacts.

     

Synthesis and luminescence properties of hybrid systems based on liquid crystal terbium(ІІІ) and europium(ІІІ) complexes

Russian Journal of General Chemistry - Hybrid liquid crystal systems with different ratios of the components have been prepared on the basis of 5,5′-di(heptadecyl)-2,2′-bipyridine...     

Preparation and gas sensing activity of La and Y co-doped titania nanoparticles

Journal of Sol-Gel Science and Technology - A novel gas sensing material, La–Y co-doped TiO2 nanoparticles, was synthesized by sol–gel method and applied to detect organic pollutants...     

四方体MgO的制备及对有机染料的吸附

以六水氯化镁和六次甲基四胺为原料,采用水热法合成四方体MgO,考察其对有机染料甲基橙和亚甲基蓝的吸附行为.通过TGA-DTA、SEM、XRD、N2-sorption和FT-IR等手段表征样品.结果表明,原料浓度、温度和表面活性剂对四方体MgO结构的形成影响较小,而反应时间的延长有助于有序结构的组装.温度170℃、时间24h、MgCl2·6H2O与C6H12N4浓度比为1∶2和表面活性剂PVP是制备四方体MgO的最佳条件.在溶液浓度10mg · L-1的单一吸附实验过程中,四方体MgO对甲基橙和亚甲基蓝的去除率分别为91.3;和22.3;,吸附过程均为单层吸附且符合Langmuir等温吸附模型和伪二级吸附动力学方程.在溶液浓度40 mg·L-1、甲基橙和亚甲基蓝浓度比3∶1的混合溶液吸附过程中,四方体MgO对甲基橙和亚甲基蓝的去除率分别为80.1;和97.9;.     

Simulation of collisions of two droplets containing two different liquids using incompressible smoothed particle hydrodynamics method

Theoretical and Computational Fluid Dynamics - The present study aims to simulate a collision of two droplets containing immiscible liquids by employing a three- dimensional incompressible smoothed...