Shape distortions induced by convective effect on hot object in visible, near infrared and infrared bands

The goal of this study is to examine the perturbation induced by the convective effect (or mirage effect) on shape measurement and to give an estimation of the error induced. This work explores the mirage effect in different spectral bands and single wavelengths. A numerical approach is adopted and an original setup has been developed in order to investigate easily all the spectral bands of interest with the help of a CCD camera (Si, 0.35–1.1 μm), a near infrared camera (VisGaAs, 0.8–1.7 μm) or infrared cameras (8–12 μm). Displacements due to the perturbation for each spectral band are measured and finally some hints about how to correct them are given.     

Use of ram extruder as a combined rheo-tribometer to study the behaviour of high yield stress fluids at low strain rate

We propose in this work to provide an efficient and simple extruder device able to evaluate the rheological and tribological behaviour of high yield stress fluids, such as extrudible materials. An extruder able to measure simultaneously both the friction force acting on the extruder wall and the total extrusion force is developed. Based on previous studies, an efficient and accurate method of data analysis is then proposed and applied in order to obtain both a flow curve and a tribological law. Experimental tests are performed on soft modelling clay, kaolin paste and cement-based materials. Results are compared to conventional rheometry measurements. This comparison helps to evaluate the accuracy of the proposed experimental device and procedure.     

A convective replica‐exchange method for sampling new energy basins

Replica‐exchange is a powerful simulation method for sampling the basins of a rugged energy landscape. The replica‐exchange method's sampling is efficient because it allows replicas to perform round trips in temperature space, thereby visiting both low and high temperatures in the same simulation. However, replicas have a diffusive walk in temperature space, and the round trip rate decreases significantly with the system size. These drawbacks make convergence of the simulation even more difficult than it already is when bigger systems are tackled. Here, we present a simple modification of the exchange method. In this method, one of the replicas steadily raises or lowers its temperature. We tested the convective replica‐exchange method on three systems of varying complexity: the alanine dipeptide in implicit solvent, the GB1 β‐hairpin in explicit solvent and the Aβ_25–35 homotrimer in a coarse grained representation. For the highly frustrated Aβ_25–35 homotrimer, the proposed “convective” replica‐exchange method is twice as fast as the standard method. It discovered 24 out of 27 free‐energy basins in less than 500 ns. It also prevented the formation of groups of replicas that usually form on either side of an exchange bottleneck, leading to a more efficient sampling of new energy basins than in the standard method. © 2012 Wiley Periodicals, Inc.     

Inhibiting protein biofouling using graphene oxide in droplet-based microfluidic microsystems

Biofouling or adsorption of biomolecules onto surfaces in microfluidic devices limits the type of samples which can be handled. In this paper, we take advantage of the high adsorption capacity of graphene oxide (GO) for proteins as a strategy to limit biofouling, while preserving their activity for droplet-based lab-on-chip applications.     

Inducing hysteretic spin crossover in solution

A hysteretic spin transition is induced in a solution assembly of a mononuclear Fe(III) amphiphilic complex which exhibits only gradual spin crossover in the solid state. The hysteretic behavior is dependent on dynamic solution assembly and removal of solvent causes reversion to the original bulk solid magnetic response.     

A new class of electrocatalysts for hydrogen production from water electrolysis: metal monolayers supported on low-cost transition metal carbides

This work explores the opportunity to substantially reduce the cost of hydrogen evolution reaction (HER) catalysts by supporting monolayer (ML) amounts of precious metals on transition metal carbide substrates. The metal component includes platinum (Pt), palladium (Pd), and gold (Au); the low-cost carbide substrate includes tungsten carbides (WC and W(2)C) and molybdenum carbide (Mo(2)C). As a platform for these studies, single-phase carbide thin films with well-characterized surfaces have been synthesized, allowing for a direct comparison of the intrinsic HER activity of bare and Pt-modified carbide surfaces. It is found that WC and W(2)C are both excellent cathode support materials for ML Pt, exhibiting HER activities that are comparable to bulk Pt while displaying stable HER activity during chronopotentiometric HER measurements. The findings of excellent stability and HER activity of the ML Pt-WC and Pt-W(2)C surfaces may be explained by the similar bulk electronic properties of tungsten carbides to Pt, as is supported by density functional theory calculations. These results are further extended to other metal overlayers (Pd and Au) and supports (Mo(2)C), which demonstrate that the metal ML-supported transition metal carbide surfaces exhibit HER activity that is consistent with the well-known volcano relationship between activity and hydrogen binding energy. This work highlights the potential of using carbide materials to reduce the costs of hydrogen production from water electrolysis by serving as stable, low-cost supports for ML amounts of precious metals.     

A Super-Wide Bore DNP System for Multiple Sample Polarization: Cryogenic Performance and Polarization at Low Temperature

The volume of polarized sample and the delay required between successive polarizations of samples represent serious constraints for dynamic nuclear polarization (DNP) applications. With these limitations in mind, a DNP polarizer, based on a super-wide bore (150-mm diameter) vertical magnet operating at 3.35?T, was designed. The working diameter for loading/unloading samples is equal to 46?mm and the microwave cavity can accommodate up to three samples. The cryostat can be cooled to 4.2?K in typically 2?h and filled with liquid helium in 1?h. Once filled with liquid helium, the cryostat hold time is on the order of 4?h and a minimum temperature of 1.19?K can be reached. In situ polarization levels at low temperature were measured between 5 and 10?% in single and multiple samples of ¹³C-labeled urea and glycine.     

Sliding droplets on superomniphobic zinc oxide nanostructures

This study reports on liquid-repellency of zinc oxide nanostructures (ZnO NS). The ZnO NS are synthesized by an easy and fast chemical bath deposition technique. Three different nanostructured surfaces consisting of nanorods, flowers, and particles are prepared, depending on the deposition time and the presence of ethanolamine in the reaction mixture. Chemical functionalization of the ZnO NS with 1H,1H,2H,2H-perfluorodecyltrichlorosilane (PFTS) in liquid (PFTS L) and vapor phase (PFTS V) or through octafluorobutane (C(4)F(8)) plasma deposition led to the formation of superomniphobic surfaces. A comprehensive characterization of the wetting properties (static contact angle and contact angle hysteresis) has been performed using liquids composed of deionized water and various concentrations of ethanol (surface tension between 35 and 72.6 mN/m). Depending on the nanostructures morphology, coating nature and liquid employed, high static apparent contact angles θ ≈ 150-160°, and low contact angle hysteresis Δθ ≈ 0° are obtained. The different ZnO NS are characterized using scanning electron microscopy (SEM) and contact angle measurements. The results reported in this work permit preparation of sliding omniphobic surfaces using a simple and low cost technique.     

On the use of the infinite matrix assumption and associated concepts: A critical review

The infinite matrix assumption is commonly used to derive dose rates in the field of paleodosimetric dating methods. The update of nuclear data allowed calculating new dose rate conversion factors and attenuation factors for taking account of grain size. The relevance of the infinite matrix assumption was found to be limited to specific cases and a discussion of potential errors in estimating dose rates to natural dosimeters in sedimentary media is proposed. A new set of geometric features is shown to be of paramount importance for estimating dose rates in sedimentary media. To quantify these effects, Monte Carlo modelling was applied and the architecture of the programmes is described. It is also shown that proper characterization of sediment samples, coupled to the modelling of radioactivity in these sediments may provide more accurate dose rates to quartz grains, down to the single grain scale.